Langduin C, a novel dimeric diterpenoid from the roots of Euphorbia fischeriana

Langduin C, a novel dimeric diterpenoid, was isolated from the roots of Euphorbia fischeriana and its structure was established by spectral data and single-crystal X-ray diffraction analysis.     

Fluorescent-based single-strand conformation polymorphism/heteroduplex capillary electrophoretic mutation analysis of the P53 gene.

Fluorescent-based single-strand conformation polymorphism (F-SSCP) analysis with capillary electrophoresis (CE) is the most common method for the detection of mutation because of its high sensitivity and resolution. In this study, we prepared an inexpensive linear polyacrylamide (LPA), and successfully applied it to CE-SSCP analysis and tandem CE-SSCP/heteroduplex analysis (HA) of the P53 gene on an ABI capillary genetic analyzer. A comparison of the sieving capabilities of a homemade LPA and commercial polydimethylacrylamide (PDMA) demonstrates that the homemade LPA has a higher resolution, a shorter analysis time, and is more suitable for tandem SSCP/HA than commercial PDMA. To show the usefulness, mutations of P53 gene exon 7 - 8 in 37 tumor samples were investigated by using homemade LPA. The results indicate that 10 mutations were found in 9 of 37 cases; the majority of P53 mutations were missense mutations, and 70% were located in exon 7, which plays an important role in neoplastic progression in human tumorigenesis.     

Structural characterization and ferromagnetic behavior of Fe-doped TiO2 powder by high-energy ball milling

Fe-doped TiO₂ powder was prepared by high-energy ball milling, using TiO₂ Degussa P-25 and α-Fe powders as the starting materials. The structure and magnetic properties of the Fe-doped TiO₂ powder were studied by X-ray diffraction, ⁵⁷Fe Mossbauer spectroscopy and vibrating sample magnetometer. The Reitveld refinement of XRD revealed that ball milling not only triggered incorporation of Fe in TiO₂ lattice but also induced the phase transformation from anatase to rutile in TiO₂ and consequently the milled Fe-doped TiO₂ powder contained only rutile.⁵⁷Fe Mössbauer effect measure showed that Fe atoms existed in Fe²⁺ and Fe³⁺ state, which were assigned to the solid solution Fe_xTi_1−xO₂. The magnetization measurements indicated that the milled Fe-doped TiO₂ powder was ferromagnetic above room temperature. The ferromagnetism in our milled Fe-doped TiO₂ powder seemingly does not come from Fe and iron oxides particles/clusters but from the Fe-doped TiO₂ powder matrices.     

Power scaling of printed-circuit-board preionized TEA CO2 laser up to 3.6 kW

A high average power, high-repetition-rate TEA CO₂ laser employing printed-circuit-board preionizer is described. The power scaling of this preionization configuration has been demonstrated. The average output power reaches 3.6 kW at pulse repetition rate of 180 pps. Furthermore, the scaling-up ability of the rotating spark gap as high-voltage switch for high-average-power gas laser has been validated.     

Synthesis of TiO2–SiO2/polymer core–shell microspheres with a microphase‐inversion method

A novel microphase‐inversion method was proposed for the preparation of TiO₂–SiO₂/poly(methyl methacrylate) core–shell nanocomposite particles. The inorganic–polymer nanocomposites were first synthesized via a free‐radical copolymerization in a tetrahydrofuran solution, and the poor solvent was added slowly to induce the microphase separation of the nanocomposite and result in the formation of nanoparticles. The average particle sizes of the microspheres ranged from 70 to 1000 nm, depending on the reaction conditions. Transmission electron microscopy and scanning electron microscopy indicated a core–shell morphology for the obtained microspheres. Thermogravimetric analysis and X‐ray photoelectron spectroscopy measurements confirmed that the surface of the nanocomposite microspheres was polymer‐rich, and this was consistent with the core–shell morphology. The influence of the synthetic conditions, such as the inorganic composition and the content of the crosslinking monomer, on the particle properties was studied in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3911–3920, 2006     

Synergistic effect between 4-(2-pyridylazo) resorcin and chloride ion on the corrosion of cold rolled steel in 0.5 M sulfuric acid

The corrosion inhibition of 1-(2-pyridylazo)-2-naphthol (PAR) on the corrosion of cold rolled steel in 0.5 M sulfuric acid (H₂SO₄) was studied using weight loss method and potentiodynamic polarization method. Results obtained revealed that together with chloride ion, PAR is an effective corrosion inhibitor for steel corrosion in sulfuric acid. It was found that for steel corrosion inhibition in the presence of single PAR in sulfuric acid the Temkin adsorption isotherm may be used to explain the adsorption phenomenon. For the mixture of PAR and NaCl used as corrosion inhibitor, however, the Langmuir adsorption isotherm can be used to satisfactorily elucidate the adsorption of mixture of PAR and NaCl. Potentiodynamic polarization studies showed that single PAR mainly acts as a cathodic inhibitor for the corrosion of steel in 0.5 M sulfuric acid. The mixture of PAR and chloride ion, however, acts as a mixed type inhibitor that mainly inhibits cathodic reaction of the steel corrosion in sulfuric acid. By means of electrochemical polarization tests, a desorption potential at ca. −370 mV was observed for the adsorption of mixture of PAR and chloride ion, when potential reaches this value, adsorbed inhibitor molecule heavily departs from the steel surface. For the mixture of PAR and chloride ion, thermodynamic parameters such as adsorption heat, adsorption entropy and adsorption free energy were obtained from experimental data of the temperature studies of the inhibition process at four temperatures ranging from 30 to 45 °C, the kinetic data such as apparent activation energies and pre-exponential factors at different concentrations of the inhibitor were calculated, and the effect of the apparent activation energies and pre-exponential factors on the corrosion rates of cold rolled steel was discussed. The most suitable range of inhibitor concentration was discussed. The inhibitive action was satisfactorily explained by using both thermodynamic and kinetic models. Synergism between chloride ion and PAR was proposed. The results obtained from weight loss and potentiodynamic polarization were in good agreement.     

在增溶剂存在下硫氰酸盐-结晶紫光度法测定微量钨

在明胶存在下,钨与硫氰酸盐和结晶紫生成可溶性三元缔合物,最大吸收波长为540nm,表现摩尔吸光系数为4.1×10~5 L·mol~(-1)·cm~(-1),钨在0～11μg/25ml范围内服从比尔定律。方法已用于测定岩石中微量钨。     

Homogeneous chemiluminescence system in neutral and near neutral aqueous solution with ClO2 as oxidant and its analytical application

Using ClO₂ as chemiluminescence (CL) oxidant, a novel homogeneous CL system in neutral and near neutral aqueous solution is proposed in this paper. ClO₂ could oxidize sulfite in pH 5.0–8.5 acetate buffer to produce CL emission, and pipemidic acid could sensitize the CL system. The ClO₂–SO₃²⁻–pipemidic acid reaction was used as a model CL system and explored the possibility of highly active and eco-friendly ClO₂ being used as CL oxidant in neutral and near neutral aqueous solution. Combined with flow-injection analysis, the proposed CL system was applied to the automated dissolution testing of pipemidic acid tablet. Compared with the common strong acidic or strong basic CL system, this proposed CL owns its advantages.     

Study of urinary nucleosides as biological marker in cancer patients analyzed by micellar electrokinetic capillary chromatography

Thirteen normal and modified nucleosides, primarily degradation products of transfer ribonucleic acid (tRNA), were evaluated as potential tumor markers for cancer patients. Their urinary concentrations were determined by means of micellar electrokinetic capillary chromatography (MEKC) in the urine from 54 healthy adults and 70 cancer patients, then quantitatively expressed as a function of creatinine excretion. It was found that urinary nucleosides for cancer patients were on the average significantly higher than those for healthy controls, however, no significant differences were found between male and female or between different ages. Based on 13 urinary nucleoside concentrations, principal component analysis (PCA) could be used to classify 72% of cancer patients from the healthy controls. The present study shows that the precise measurement of urinary nucleosides by MEKC in combining with PCA technique may provide a clinically useful approach for diagnosis of cancer.     

Toward the most versatile fluorophore: Direct functionalization of BODIPY dyes via regioselective C—H bond activation

BODIPY dyes are privileged fluorophores that are now widely used in highly diverse research fields. An overview of BODIPY dyes and a summarization of the different synthetic methodologies reported for direct C-H functionalization of the BODIPY framework have been provided.