Mutual influence of the morphology and capillary rheological properties in nylon/glass‐fiber/liquid‐crystalline‐polymer blends

Nylon‐6/glass‐fiber (GF)/liquid‐crystalline‐polymer (LCP) ternary blends with different viscosity ratios were prepared with three kinds of nylon‐6 with different viscosities as matrices. The rheological behaviors of these blends were characterized with capillary rheometry. The morphology was observed with scanning electron microscopy and polarizing optical microscopy. This study showed that although LCP did not fibrillate in binary nylon‐6/LCP blends, LCP fibrillated to a large aspect ratio in some ternary blends after GF was added. The addition of 5 wt % LCP significantly reduced the melt viscosity of nylon‐6/GF blends to such an extent that some nylon‐6/GF/LCP blends had quite low viscosities, not only lower than those of neat resins and nylon‐6/GF blends but also lower than those of corresponding nylon‐6/LCP blends. The mutual influence of the morphology and rheological properties was examined. The great reduction of the melt viscosity was considered the result of LCP fibrillation. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1619–1627, 2004     

Effects of additives and post‐treatment on the thermoelectric performance of vapor‐phase polymerized PEDOT films

Vapor‐phase polymerization (VPP) is an important method for the fabrication of high‐quality conducting polymers, especially poly(3,4‐ethylenedioxythiophene) (PEDOT). In this work, the effects of additives and post‐treatment solvents on the thermoelectric (TE) performance of VPP‐PEDOT films were systematically investigated. The use of 1‐butyl‐3‐menthylinidazolium tetrafluoroborate ([BMIm][BF₄], an ionic liquid) was shown to significantly enhance the electrical conductivity of VPP‐PEDOT films compared with other additives. The VPP‐PEDOT film post‐treated with mixed ethylene glycol (EG)/[BMIm][BF₄] solvent displayed the high power factor of 45.3 μW m^?1 K^?2 which is 122% higher than that prepared without any additive or post‐treatment solvent, along with enhanced electrical conductivity and Seebeck coefficient. This work highlighted the superior effect of the [BMIm][BF₄] additive and the EG/[BMIm][BF₄] solvent post‐treatment on the TE performance of the VPP‐PEDOT film. These results should help with developing the VPP method to fabricate high‐performance PEDOT films. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 1738–1744     

meta-Nitration of Arenes Bearing ortho/para Directing Group(s) Using C−H Borylation

Herein, we report the meta-nitration of arenes bearing ortho/para directing group(s) using the iridium-catalyzed C−H borylation reaction followed by a newly developed copper(II)-catalyzed transformation of the crude aryl pinacol boronate esters into the corresponding nitroarenes in a one-pot fashion. This protocol allows the synthesis of meta-nitrated arenes that are tedious to prepare or require multistep synthesis using the existing methods. The reaction tolerates a wide array of ortho/para-directing groups, such as −F, −Cl, −Br, −CH₃, −Et, −iPr −OCH₃, and −OCF₃. It also provides regioselective access to the nitro derivatives of π-electron-deficient heterocycles, such as pyridine and quinoline derivatives. The application of this method is demonstrated in the late-stage modification of complex molecules and also in the gram-scale preparation of an intermediate en route to the FDA-approved drug Nilotinib. Finally, we have shown that the nitro product obtained by this strategy can also be directly converted to the aniline or hindered amine through Baran's amination protocol.     

Amidation,Esterification, and Thioesterification of a Carboxyl‐Functionalized Covalent Organic Framework

Three new post‐synthetic modification reactions, namely amidation, esterification, and thioesterification, were demonstrated on a novel highly crystalline two‐dimensional covalent organic framework (COF), COF‐616, bearing pre‐installed carboxyl groups. The strategy can be used to introduce a large variety of functional groups into COFs and the modifications can be carried out under mild reaction conditions, with high yields, and an easy work‐up protocol. As a proof of concept, various chelating functionalities were successfully incorporated into COF‐616 to yield a family of adsorbents for efficient removal of several contaminants in the water.     

惰气熔融-热导法测定钕铁硼永磁材料中的氢

建立惰气熔融-热导法测定钕铁硼永磁材料中氢的分析方法。当氧-氢比例大于50:1时,CO对氢的测定结果产生一定的干扰,加入舒茨试剂可消除此干扰。采用标准坩埚,称样0.05g,熔融功率为2.85 kW,选择高纯镍篮和锡片做助熔剂,钕铁硼中氢释放完全。以普通钢铁参考物质建立氢校准曲线,线性相关系数r～2=0.9999,检出限为0.75μg/g。该法用于钕铁硼样品中氢的测定,测定结果与脉冲熔融飞行时间质谱-气体元素分析仪测定结果基本一致,测定结果的相对标准偏差为1.4%(n=5)。该方法可以准确测定钕铁硼永磁材料中的氢,能满足日常分析的要求。     

Enhanced thermoelectric performance of PEDOT: PSS films via ionic liquid post-treatment

Thermoelectric(TE)energy harvesting can effectively convert waste heat into electricity,which is a crucial technology to solve energy concerns.As a promising candidate for energy conversion,poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)(PEDOT:PSS)has gained significant attention owing to its easy doping,high transparency,and solution processability.However,the TE performance of PEDOT:PSS still needs to be further enhanced.Herein,different approaches have been applied for tuning the TE properties:(i)direct dipping PEDOT:PSS thin films in ionic liquid;(ii)post-treatment of the films with concentrated sulfuric acid(H₂SO₄),and then dipping in ionic liquid.Besides,the same bis(trifluoromethanesulfonyl)amide(TFSI)anion and different cation salts,including 1-ethyl-3-methylimidazolium(EMIM+)and lithium(Li+),are selected to study the influence of varying cation types on the TE properties of PEDOT:PSS.The Seebeck coefficient and electrical conductivity of the PEDOT:PSS film treated with H2SO4EMIM:TFSI increase simultaneously,and the resulting maximum power factor is 46.7μW·m^-1·K^-2,which may be attributed to the ionic liquid facilitating the rearrangement of the molecular chain of PEDOT.The work provides a reference for the development of organic films with high TE properties.     

Maximum speed of pitch change and how it may relate to speech

How fast speakers can change pitch voluntarily is potentially an important articulatory constraint for speech production. Previous attempts at assessing the maximum speed of pitch change have helped improve understanding of certain aspects of pitch production in speech. However, since only "response time"--time needed to complete the middle 75% of a pitch shift--was measured in previous studies, direct comparisons with speech data have been difficult. In the present study, a new experimental paradigm was adopted in which subjects produced rapid successions of pitch shifts by imitating synthesized model pitch undulation patterns. This permitted the measurement of the duration of entire pitch shifts. Native speakers of English and Mandarin participated as subjects. The speed of pitch change was measured both in terms of response time and excursion time-time needed to complete the entire pitch shift. Results show that excursion time is nearly twice as long as response time. This suggests that physiological limitation on the speed of pitch movement is greater than has been recognized. Also, it is found that the maximum speed of pitch change varies quite linearly with excursion size, and that it is different for pitch rises and falls. Comparisons of present data with data on speed of pitch change from studies of real speech found them to be largely comparable. This suggests that the maximum speed of pitch change is often approached in speech, and that the role of physiological constraints in determining the shape and alignment of F0 contours in speech is probably greater than has been appreciated.     

基于低压补气的变转速冷藏系统的性能研究

针对冷库运行过程中出现的压缩机排气温度高、系统性能衰减等问题,设计并搭建了基于平行流换热器的低压补气冷藏系统实验台对冷藏系统在低压补气和不补气状态下压缩机转速对冷藏系统综合性能的影响进行了分析.结果 表明:随着压缩机转速的增加,两种工况下压缩机排气温度都会增加,在补气模式下排气温度增加了5％,在不补气模式下增加了7.8％;冷藏系统的制冷量也会随之增大,在补气模式下制冷量增加了43％,在不补气模式下增加了25.9％,低压补气模式下增加的制冷量更大一些;压缩机功率随转速的增加而增大,且两种模式下增幅接近,在补气模式下压缩机功率增加了27.44％,在不补气模式下增加了27.34％;另外随着转速的增大系统COP呈现先增大后减小的趋势,在转速为3500 r/min处趋于稳定.