铬（Ⅲ）邻菲咯啉,8—羟基喹啉配合物／Y型分子筛的制备及苯酚催化羟化

制备了铬（Ⅲ）邻菲咯啉，８－羟基喹啉配合物／Ｙ型分子筛，利用元素分析，ＳＥＭ，ＵＶ－ＶｉｓＢＥＴ及ＸＲＤ等方法确定了分子筛选笼中金属配合物的生在及其晶体结构，考察了实验参数对苯酚转化率及产物选择性的影响。     

四氟乙烯-乙烯溶液沉淀聚合

本文编制了一个简易计算机程序,测定了氟氯烷溶液沉淀聚合体系中四氟乙烯-乙烯共聚竞聚率:40℃:γC_2H_4=0.156±0.001,γC_2F_4=0.022±0.01670℃:γC_2H_4=0.197±0.001,γC_2F_4=0.055±0.020在此聚合体系中,聚合温度和共聚物组成比对链的规整性都有明显影响。当乙烯在45～55mol%范围内时,共聚物的IR随组成比而变化,利用此规律可简便地测定共聚物的组成比。     

铜配合物在Y型分子筛超笼中的组装及其催化苯酚羟化活性

 详尽介绍了通过分步法，在Y型分子筛超笼中制备铜（II）- 1，10菲咯啉和8-羟基喹啉配合物（简称CuPhen/Y，CuOx/Y）的过程；活性评价结果显示同Cu/Y相比，以H2O2为氧化剂，CuPhen/Y，CuOx/Y具有特殊的催化苯酚羟化功能。     

用原位红外光谱研究氧化镁上甲醛与乙醛合成双季戊四醇反应的机理

 以甲醛和乙醛为原料，研究了在碱性催化剂存在下合成双季戊四醇反应的机理和工艺．结果表明，与液体碱NaOH的碱催化作用相比，固体碱MgO上的产物季戊四醇、双季戊四醇和三季戊四醇在收率方面水平相当．用原位红外光谱研究了在MgO上甲醛和乙醛各自的吸附物种及甲醛－乙醛混合物的吸附物种，考察了这些吸附物种随温度的变化．结果发现，吸附作用削弱了甲醛和乙醛分子中的C＝O双键；甲醛与乙醛原位反应后表明有α，β不饱和醛吸附物种生成，说明由甲醛与乙醛合成双季戊四醇的反应经历了丙烯醛中间物．     

Tailoring the polarity of polymer shell on BaTiO_3 nanoparticle surface for improved energy storage performance of dielectric polymer nanocomposites

Nanocomposites comprising flexible polymers and high dielectric constant inorganic nanoparticles are considered to be one of the promising candidates for electrostatic capacitor dielectrics.However,the effect of interfacial property on electrical ene rgy storage of dielectric polymer nanocomposites is still not clear.Herein,the role of the polarity of the interfacial region is investigated.For this purpose,three polymers with different polarity,polymethyl methacrylate(PMMA),polyglycidyl methacrylate,and polymethylsulfonyl ethyl methacrylate(PMSEMA) are attached onto BaTi03(BT) na noparticle surface via surface-initiated reversible addition-fragmentation chain transfer polymerization.It is found that the polarity of shell polymers shows an apparent effect on the dielectric and energy storage of dielectric polymer nanocomposites.For example,PMSEMA@BT(shell polymer possesses the highest polarity)increases dielectric loss and decreases the breakdown strength of the nanocomposites,leading to lower ene rgy storage capability.However,PMMA@BT(shell polymer possesses the lowest polarity) can induce higher breakdown strength of the nanocomposites.As a result,the PMMA@BT nanocomposite exhibits the highest electrical energy sto rage capability among the three nanocomposites.This re search provides new insight into the design of core-shell nanofillers for dielectric energy storage applications.     

MCM-41负载的La,Ce和Pt催化剂上三氯乙烯的低温催化燃烧

 分别采用直接水热合成法和浸渍法制备了Si-MCM-41, La-Si-MCM-41和Ce-Si-MCM-41介孔材料及其负载的Pt催化剂. 小角X射线衍射、氮气吸附和扩展X射线精细结构分析表明, La和Ce元素进入了MCM-41分子筛的骨架结构. NH3程序升温脱附测试未检测到含La和Ce样品表面的酸性. 所制备的催化剂具有较高的三氯乙烯催化燃烧活性及生成CO2和HCl的选择性.     

Polymyxin B Combined with Minocycline: A Potentially Effective Combination against blaOXA-23-harboring CRAB in In Vitro PK/PD Model

Polymyxin-based combination therapy is commonly used to treat carbapenem-resistant Acinetobacter baumannii (CRAB) infections. In the present study, the bactericidal effect of polymyxin B and minocycline combination was tested in three CRAB strains containing bla_OXA-23 by the checkerboard assay and in vitro dynamic pharmacokinetics/pharmacodynamics (PK/PD) model. The combination showed synergistic or partial synergistic effect (fractional inhibitory concentration index ≤0.56) on the tested strains in checkboard assays. The antibacterial activity was enhanced in the combination group compared with either monotherapy in in vitro PK/PD model. The combination regimen (simultaneous infusion of 0.75 mg/kg polymyxin B and 100 mg minocycline via 2 h infusion) reduced bacterial colony counts by 0.9–3.5 log₁₀ colony forming units per milliliter (CFU/mL) compared with either drug alone at 24 h. In conclusion, 0.75 mg/kg polymyxin B combined with 100 mg minocycline via 2 h infusion could be a promising treatment option for CRAB bloodstream infections.     

聚合物纳米复合电介质

聚合物纳米复合材料能够发挥纳米材料在电、磁、光等方面的优越性,也具有聚合物的易成型等方面的优点,正成为电介质领域研究的热点.本文综述了聚合物纳米复合材料在介电性能方面的研究概况,主要涉及了电导、介电强度与空间电荷、介电常数、介电损耗以及局部放电等方面的研究.最后展望了今后的研究方向.     

Effect of CeO2 preparation method and Cu loading on CuO/CeO2 catalysts for methane combustion

CeO2 was synthesized by sol-gel, hydrothermal, nitrate thermal decomposition methods, respectively, and used as support to prepare CuO/CeO2 catalysts. According to characterization and reaction results, preparation method of CeO2 had a great influence on the physicochemical properties and activities of CuO/CeO2 catalysts. CuO with high dispersion and strong interaction with CeO2 was highly active in methane combustion, while CuO particles less associated with CeO2 showed less activity. The CuO catalyst supported on CeO2 which was prepared via nitrate thermal decomposition method showed the largest area, the smallest particle size, the highest dispersion of copper species and strong support metal interactions. Therefore, it presented the highest redox ability and activity for methane combustion. Activities of the catalysts with different copper content kept increasing until 5% Cu loading and from then on kept constant. Moreover, methane conversion decreased as methane space velocities increased on CuO/CeO2 catalyst. Addition of CO2 to the feed did not produce a significant effect on the catalytic activity, but the presence of H2O provoked a remarkable decrease on the activity of CuO/CeO2 catalyst.     

Effect of water on the performance of Pd-ZSM-5 catalysts for the combustion of methane

Palladium-based catalysts were prepared using impregnation （I） and ion-exchange method （E） with ZSM-5 as support. Pd-ZSM-5（I） and Pd-ZSM-5（E） catalysts presented the high activity for the combustion of methane. The order of activity was consistent with Brcnsted acidity of the catalysts： Pd-ZSM-5（I）〉Pd-ZSM-5（E）. It was shown by FT-IR that methane was adsorbed on the acidic bridging hydroxyl groups of ZSM-5-supported Pd catalysts. The effect of water on the activity of Pd-ZSM-5 was investigated. The inhibition effect of water on the conversion of methane was observed. However, water promoted the stability of Pd-ZSM-5 obviously during extended time periods. XPS measurement showed that Pd/Si ratio near the surface of Pd-ZSM-5（E） decreased more pronouncedly with time in dry stream than that of Pd-ZSM-5（I）, this is attributed to the dispersion of Pd into the micropores. The addition of water, however, retarded Pd dispersion. And high partial pressure of methane reduced this effect of water vapor. The decrease in activity during the stability test can be explained on the basis of the reduction of Pd/Si ratio.