Ni(111)表面一氧化碳和氢共吸附的密度泛函理论研究

本文用密度泛函理论(DFT)的总能计算研究了一氧化碳和氢原子在Ni(111)表面上p(2×2)共吸附系统的原子结构和电子态，结果表明CO和H原子分别被吸附于两个对角p(1×1)元胞的hcp和fcc位置.以氢分子和CO分子作为能量参考点，总吸附能为2.81 eV，相应的共吸附表面功函数φ为6.28 eV.计算得到的C—O，C—Ni和H—Ni的键长分别是1.19?, 1.96?和 1.71?，并且CO分子以C原子处于hcp的谷位与金属衬底原子结合.衬底Ni(111)的最外两层的晶面间距在吸附后的相对变化分别是 关键词： Fisher-Tropsch反应 催化作用 Ni(111) p(2×2)/(CO+H) 共吸附     

喷气式Z箍缩等离子体辐射软X射线能谱的研究

研制了一台五通道ROSS-FILTER-PIN软X射线能谱仪，能谱范围为0.28—1.56keV.它由5个连续能段组成，每个能段的起止边由罗斯滤片对(ROSS-FILTERS)的L或K吸收边确定.罗斯滤片对的厚度通过优化计算得到，为了使每个通道的灵敏区外响应(即所测能段外响应)与通道总响应之比最小，在滤片对的第二滤片上镀上了一定厚度的第一滤片材料；为了缩减滤片表面积以增强低能滤片的抗冲击能力及方便滤片加工，能谱仪采用了小探测面积的PIN探测器(1mm²).借助此能谱仪，测量得到了喷气式Z箍缩(Z-pinch)等离子体辐射软X射线能谱的分布，并研究了软X射线产额随箍缩状况的变化趋势. 关键词： Z箍缩等离子体 罗斯滤片 软X射线能谱     

一类Marangoni对流边界层方程的近似解析解

利用Adomain解析拆分和Padé逼近方法对由Marangoni对流诱发的层流边界层问题进行了研究, 提供了一种求解边界层方程的解析分析方法. 得到了问题的近似解析解并对相应的流动及传热特性进行了探讨. 本文所提出的思想方法可以用于解决其他科学和工程技术问题. 关键词： Marangoni对流 非线性 Adomain拆分法 近似解析解     

Synthesis, structure and X-ray excited luminescence of Ce-doped AREP2O7-type alkali rare earth diphosphates (A=Na, K, Rb, Cs; RE=Y, Lu)

The crystal structures of five new alkali rare earth diphosphates were obtained by Rietveld refinement of powder X-ray diffraction (XRD) profiles, including four alkali lutetium diphosphates ALuP₂O₇ (A=Na, K, Rb, Cs) and the low temperature phase of KYP₂O₇. The scintillation properties of Ce³⁺-doped AREP₂O₇ (A=Na, K, Rb, Cs; RE=Y, Lu) powder samples were studied under static and pulsed X-ray excitations, and featured outstanding scintillation properties with light yields 1–2 times of that of Bi₄(GeO₄)₃ and relatively short decay time of 20–28 ns. Considering the suitable emission wavelength range, large light yield, short decay time, and non-hygroscopic nature, Ce³⁺-doped AREP₂O₇-type alkali rare earth diphosphates are potential candidates for high-counting-rate scintillation applications.     

Scheme for Implementing Grover Quantum Search Algorithm with Hot Ions

We propose a simple scheme to implement the two-qubit Grover quantum search algorithm with trapped ions in thermal motion. In the scheme two states of the Λ-type three-level ions are used as quantum bits (qubits). The scheme puts no limitations on the intensity of the laser field and the speed of the hot ions, and all the operations can be achieved in a reasonable amount of time before decoherence sets in. The scheme might be experimentally realizable with presently available techniques.     

A green strategy for lithium isotopes separation by using mesoporous silica materials doped with ionic liquids and benzo-15-crown-5

Three new mesoporous silica materials IL15SGs (HF15SG, TF15SG and DF15SG) doped with benzo-15-crown-5 and imidazolium based ionic liquids (C₈mim⁺PF₆ ^?, C₈mim⁺BF₄ ^? or C₈mim⁺NTf ₂ ^? ) have been prepared by a simple approach to separating lithium isotopes. The formed mesoporous structures of silica gels have been confirmed by transmission electron microscopy image and N₂ gas adsorption–desorption isotherm. Imidazolium ionic liquids acted as templates to prepare mesoporous materials, additives to stabilize extractant within silica gel, and synergetic agents to separate the lithium isotopes. Factors such as lithium salt concentration, initial pH, counter anion of lithium salt, extraction time, and temperature on the lithium isotopes separation were examined. Under optimized conditions, the extraction efficiency of HF15SG, TF15SG and DF15SG were found to be 11.43, 10.59 and 13.07 %, respectively. The heavier isotope ⁷Li was concentrated in the solution phase while the lighter isotope ⁶Li was enriched in the gel phase. The solid–liquid extraction maximum single-stage isotopes separation factor of ⁶Li–⁷Li in the solid–liquid extraction was up to 1.046 ± 0.002. X-ray crystal structure analysis indicated that the lithium salt was extracted into the solid phase with crown ether forming [(Li_0.5)₂(B15)₂(H₂O)]⁺ complexes. IL15SGs were also easily regenerated by stripping with 20 mmol L^?1 HCl and reused in the consecutive removal of lithium ion in five cycles.     

高分子化学线型缩聚反应数均聚合度计算的教学体验和改进

对高分子化学课程本科教学中有关线型缩聚反应数均聚合度的计算,以及聚合度与官能团过量之间的定性及定量关系进行了讨论。针对现有教学方法易引发学生误解和混淆的情况,定义了新的参数和发展了相应改进的计算方程。新的计算方程的计算过程清晰、参数定义明确、易于学生理解掌握,在实践中取得了良好的教学效果。     

两个2,4-二羟基苯甲醛缩甘氨酸配合物的合成、结构及其对醇的选择性氧化催化

合成和表征了2个2,4-二羟基苯甲醛缩甘氨酸(H₃L)席夫碱配合物[Cu(Py)₂(HL)] (1)和[Zn(Py)₃(HL)]·2Py(Py=吡啶) (2),并通过X射线单晶衍射分析确定了其结构.配合物1通过分子间的O-H…O氢键形成了一维链状结构,配合物2通过分子间的O-H…O和C-H…O氢键形成了二维网状结构.重要的是,配合物1在醇的选择性氧化反应中显示出了良好的催化效率(转化率高达94.8%,选择性高达98.3%).     

用于DNA杂交检测的丝网印刷型生物传感器的研究

将单链DNA(ssDNA)固定到丝网印刷碳电极上构成电化学DNA传感器,采用电化学指示剂,建立DNA杂交的检测方法.Co(phen)33+电化学指示剂通过钴盐与配体邻菲罗啉络合制备,采用等离子发射光谱法(ICP-AES)和核磁共振法(NMR)表征功能基团,采用循环伏安法(CV)分析指示剂的电化学特性,并以此为基础研究ssDNA在电极表面的固定及DNA杂交过程.本研究探讨了直接吸附、静电吸附与键合等3种ssD-NA在电极表面的固定方法,结果表明,静电吸附法和键合法具有较高的ssDNA固定量,采用静电吸附法固定探针的电极杂交目标DNA后,Co(phen)33+易于嵌入双链DNA (dsDNA)中,CV峰电流(ip)信号随目标DNA浓度增加.本研究采用静电吸附ssDNA的电极检测DNA杂交,实验表明,当探针固定液中ssDNA浓度为5 mg/L时,目标DNA浓度在6.65×10- 8～4.26× 10-6mol/L范围内,Co(phen)33+在dsDNA修饰电极上ip值与DNA浓度呈良好的线性关系,R2为0.9819.本研究为建立新的微生物分子分型手段提供了初步依据.     

超高效液相色谱串联质谱法检测食品中蜡样芽孢杆菌呕吐毒素Cereulide

建立了快速检测食品中蜡样芽孢杆菌呕吐毒素Cereulide的超高效液相色谱三重四极杆质谱联用分析方法.样品提取液经硅胶和Carb固相萃取柱净化后,以0.1％甲酸-0.2 mmol/L乙酸铵溶液和0.1％甲酸-乙腈溶液作为流动相进行梯度洗脱,在Acquity BEH 300 C18柱上实现分离,正离子ESI-MS/MS MRM方式检测,以13C6-Cereulide作为内标的稳定同位素稀释法进行定量分析.一次进样分析时间为7 min.米饭、添加33％玉米胚油的米饭和婴儿配方奶粉中平均加标回收率分别为85.7％～87.5％,85.3％～110％和94.2％～113％;相对标准偏差为4.6％～13％,5.9％～9.1％和3.4％～6.5％(n=6);定量限为10 ng/kg (S/N=10).方法灵敏、准确,适合于食品样品中Cereulide的测定,并已成功应用于食物中毒样品的检测.