核磁共振法测定高聚物的结构—核磁共振二维谱

介绍了核磁共振(NMR)波谱,尤其是核磁共振二维谱(2D NMR)在最近几年内的进展。内容包括怎样用NMR测定高聚物的序列分布、共聚物结构、聚合物的混溶性、聚合物液晶的取向度、分子量、短链度和长链支化度、凝聚态高聚物的多相结构等。     

自制苯乙烯-丙烯酸乙酯共聚物与PEG20M复合萃取涂层用于洗涤制品中1,4-氧杂环己烷的测定

采用顶空固相微萃取-毛细管气相色谱联用技术测定了洗涤制品中的1,4-二氧杂环己烷.使用自制的萃取头(苯乙烯-丙烯酸乙酯共聚物与PEG20M复合)于顶空平衡温度80℃下萃取样品40 min.萃取物用内壁涂有SE-30固定液的石英毛细管柱分离,外标法定量.1,4-二氧杂环己烷含量为0.35～120 μg/g时,其峰面积与含量呈良好的线性关系(r=0.999 8);回收率为98.7%～102%;相对标准偏差(n=5)为9.33%.     

水杨酸与烟草铜锌超氧化物歧化酶的相互作用

利用邻苯三酚自氧化法监测了磷酸盐缓冲体系中水杨酸（SA）对超氧化物歧化酶（SOD）活力的影响。通过荧光光谱法研究了水杨酸与超氧化物歧化酶的相互作用机制，求得两者结合的形成常数和配位数，使用Forster非辐射能量转移技术求出了两者的结合位置距色氨酸残基间的距离为2.60nm。     

Synthesis,crystal structure and spectroscopic characterization of a hydrogen-bonded 1D copper(II) complex

Novel 1:2 and 1:1 (M:L) copper(II) complexes have been prepared from the tridentate ligand 2-(1-methyl-2-aza-5-oxapentyl)phenol (H₂L¹). The crystal structure of [Cu(HL¹)₂] (1) exhibits a noncentrosymmetric square-planar geometry with a slightly tetrahedral distortion. The Cu^II atom is coordinated by two amino N and two phenoxo O atoms of two (HL¹)^– ligands. The phenoxo and the alkoxy groups are involved in two strong intramolecular hydrogen bonds. The coordination moieties are further connected to a 1D linear structure by the action of intermolecular hydrogen bonds between the alkoxyl and the amino groups. The importance of steric hindrance introduced by the methyl group in the molecular structure and the packing of the complex molecules has been demonstrated. The e.p.r. parameters of (1) have been obtained: g = 2.231, g = 2.005, g _iso = 2.080, A = 185.0 G, A _iso = 86.5 G, A = (3A _iso – A )/2 = 37.3 G. These results confirm a distorted square planar stereochemistry with a ( )¹ ground state.     

无人机系统强电磁环境效应检测技术

对电子系统强电磁环境实验效应检测技术研究现状进行了系统的研究分析,提出通过对内部电路节点电压信号实时监测实现无人机电子系统强电磁环境效应检测判断的方法。设计了以阻抗变换和电光转换电路为核心的光纤输出型电压探头,实现1 M高输入阻抗、DC 450 MHz带宽、数百m传输距离等技术要求。在无人机系统强电磁脉冲环境实验中利用所设计的电压探头实现了无人机舵机、飞控、链路等电路节点工作电压信号波形的远程监测,获取了无人机电路节点耦合的电压脉冲波形。     

加脊TEM喇叭初步研究

针对恒阻抗TEM喇叭的上下面板电流分布不对称,采用小反射理论和阻抗渐变思想并通过设计脊结构对恒阻抗TEM喇叭进行了改进,研制了加脊TEM喇叭。仿真及实验研究结果表明：对于脉冲宽度约为1 ns的高斯脉冲,通过加脊在一定程度上改善了恒阻抗TEM喇叭上下面板电流分布的不对称性和E面辐射电场的不对称性;相对于相同口径的恒阻抗TEM喇叭,加脊TEM喇叭作为辐射天线和反射面脉冲天线馈源时系统的主轴远场辐射因子均有提高。     

电场极化方向对自由空间电场测量的影响

介绍了自主研制的脉冲电场原始波形测量系统的模块组成与基本工作原理。针对在未知被测电场方向及复杂的电场环境下垂直干扰电场对自由空间电场测量产生的影响,通过建立自由空间电场测量系统前端的简化模型,对不同尺寸天线与屏蔽盒进行仿真计算。仿真计算结果与理论分析基本一致,结果表明：干扰电场响应信号与待测电场响应信号相差2个数量级以上,干扰电场的影响可忽略不计。     

小麦粉衍生中孔氮掺杂颗粒炭负载金催化剂用于乙炔氢氯化反应（英文）

聚氯乙烯是五大工程塑料之一,在国民经济中占有重要的地位.基于中国富煤少油缺气的能源格局,我国主要采用基于煤化工的电石法氯乙烯生产工艺,但该工艺必须采用氯化汞催化剂,受到国际限汞公约的影响,无汞催化剂的开发迫在眉睫.其中炭负载金催化剂在该反应中活性最高,近几年来取得了较大进展,有望实现产业化.氮掺杂的炭材料在诸多反应中展现了较好的性能,其负载金属催化剂可以有效提高金属的分散度及稳定性,成为近几年多相催化领域的一个研究热点.最近我们课题组报道了一种氮掺杂中孔成型的制备方法:以小麦粉为原料,通过直接炭化法制备了氮掺杂中孔成型炭,这种氮掺杂中孔成型炭作为无汞催化剂在乙炔氢氯化反应中显示出了优异的催化性能.小麦粉衍生的氮掺杂中孔成型炭具有成型容易.原料价廉易得、易于放大生产等优点,是优选的工业化催化剂的载体.本文以这种氮掺杂的成型炭为载体制备了负载型金催化剂,研究其催化乙炔氢氯化性能.结果表明,氮的掺杂使得中孔炭负载金(Au/N-MC)催化剂上乙炔氢氯化活性明显提高.在氯化氢/乙炔比例1.1、反应温度180℃、乙炔空速600 h~(-1)的条件下,Au/N-MC上的乙炔转化率为50%,是Au/MC催化剂活性的2倍.通过对催化剂的表征发现,氮的掺杂能有效地锚定Au/N-MC催化剂中活性组分Au~(3+),抑制催化剂制备过程中Au~(3+)还原为Au~0,从而提高催化剂活性和稳定性.小麦粉衍生的氮掺杂中孔炭的原料廉价易得,生产工艺简单,易成型,也容易实现工业化生产,是负载型金属催化剂的优良载体,其负载的无汞催化剂性能优越,有望取代电石法氯乙烯产业的汞催化剂,成为新一代无汞催化剂.     

Controllable Synthesis of Few‐Layer Bismuth Subcarbonate by Electrochemical Exfoliation for Enhanced CO2 Reduction Performance

Two‐dimensional (2D) engineering of materials has been recently explored to enhance the performance of electrocatalysts by reducing their dimensionality and introducing more catalytically active ones. In this work, controllable synthesis of few‐layer bismuth subcarbonate nanosheets has been achieved via an electrochemical exfoliation method. These nanosheets catalyse CO₂ reduction to formate with high faradaic efficiency and high current density at a low overpotential owing to the 2D structure and co‐existence of bismuth subcarbonate and bismuth metal under catalytic turnover conditions. Two underlying fast electron transfer processes revealed by Fourier‐transformed alternating current voltammetry (FTacV) are attributed to CO₂ reduction at bismuth subcarbonate and bismuth metal. FTacV results also suggest that protonation of CO₂^.? is the rate determining step for bismuth catalysed CO₂ reduction.     

Selective Hydrogenation of CO2 to Ethanol over Cobalt Catalysts

Methods for the hydrogenation of CO₂ into valuable chemicals are in great demand but their development is still challenging. Herein, we report the selective hydrogenation of CO₂ into ethanol over non‐noble cobalt catalysts (CoAlO_x), presenting a significant advance for the conversion of CO₂ into ethanol as the major product. By adjusting the composition of the catalysts through the use of different prereduction temperatures, the efficiency of CO₂ to ethanol hydrogenation was optimized; the catalyst reduced at 600 ° gave an ethanol selectivity of 92.1 % at 140 °C with an ethanol time yield of 0.444 mmol g^?1 h^?1. Operando FT‐IR spectroscopy revealed that the high ethanol selectivity over the CoAlO_x catalyst might be due to the formation of acetate from formate by insertion of *CH_x, a key intermediate in the production of ethanol by CO₂ hydrogenation.