Hole-Drilling Residual Stress Measurement with Artifact Correction Using Full-Field DIC

A full-field, multi-axial computation technique is described for determining residual stresses using the hole-drilling method with DIC. The computational method takes advantage of the large quantity of data available from full-field images to ameliorate the effect of modest deformation sensitivity of DIC measurements. It also provides uniform residual stress sensitivity in all in-plane directions and accounts for artifacts that commonly occur within experimental measurements. These artifacts include image shift, stretch and shear. The calculation method uses a large fraction of the pixels available within the measured images and requires minimal human guidance in its operation. The method is demonstrated using measurements where residual stresses are made on a microscopic scale with hole drilling done using a Focused Ion Beam – Scanning Electron Microscope (FIB-SEM). This is a very challenging application because SEM images are subject to fluctuations that can introduce large artifacts when using DIC. Several series of measurements are described to illustrate the operation and effectiveness of the proposed residual stress computation technique.     

X-Ray powder diffraction study of structural phase transitions in (Ba0.5Sr0.5)PbO3 perovskite

Study of structural properties of (Ba_0.5Sr_0.5)PbO₃ has been carried out in a wide temperature range from 10 to 1223 K using the X-ray powder diffraction technique. Two temperature-induced structural phase transitions at 948 and 1198 K have been found. For polycrystallines the XPS and electrical resistivity measurements have been performed.     

Photoemission studies of BaPb1?xBixO3 and Ba1?yKyBiO3 crystals

Summary Potassium and lead substituted single and polycrystalline material was examined by X-ray diffraction, X-ray topography, nonresonant microwave absorption, UPS and XPS. A covalent model instead of an ionic one is proposed. We find no evidence for a mixed valency of Bi. The valency of the Bi atoms at the unequivalent sites is close to +3. No density of states at the Fermi level has been detected.     

Sol gel synthesis of 3-n-propyl(4-aminomethyl)pyridinium silsesquioxane chloride and the enhanced electrocatalytic activity of LbL films

Journal of Sol-Gel Science and Technology - A silsesquioxane based on a silica matrix and 4-(aminomethyl)pyridine group was successfully synthesized using the sol–gel process with the...     

The effect of crack faces contact interaction on the critical strain in composites under compressive loading

Aviation and aerospace structural components made of composite laminates due to their internal structure and manufacturing methods often contain a number of inter- and intra-component defects which size, dispersion and interaction alter significantly the critical compression strain level [1]. The current study investigates the effect of the cracks interaction and crack faces contact interaction on the critical strain in laminar transversally isotropic material (cross-ply) compressed in a static manner along interlaminar defects. The frictionless Hertzian contact and the shear and extensional mode of stability loss are considered for the interacting crack faces. The statement of the problem is based on the most accurate approach, the model of piecewise-homogenous medium and the 3-D stability theory [2]. The moment of stability loss in the microstructure of material is treated as the onset of the fracture process. The complex non-classical fracture mechanics problem is solved utilizing the finite elements analysis. The results are obtained for the typical dispositions of cracks. It was found that the crack faces contact interaction alter significantly the critical strain level of the composite. (© 2008 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Anodic oxidation of the Ti–13Nb–13Zr alloy

This work presents the results of the investigations on the electropolishing and anodic oxidation of the Ti–13Nb–13Zr titanium alloy. Electropolishing was conducted in the solution containing ammonium fluoride and sulfuric acid, whereas the solution of phosphoric acid was used for anodic oxidation of the alloy. The influence of electropolishing and anodization process parameters on the texture (scanning electron microscopy (SEM)) and chemical composition (X-ray photoelectron spectroscopy (XPS)) of the surface layer was established. Electrochemical impedance spectroscopy in 5 % NaCl solution was used for the determination of the corrosion resistance of the alloy.     

Structural investigations of nitrided Nb2O5 and Nb2O5–SiO2 sol–gel derived films

Sol–gel derived xNb₂O₅–(100 ? x)SiO₂ films (where x = 100, 80, 60, 50, 40, 20, 0 mol%) were nitrided at various temperatures (800 °C, 900 °C, 1000 °C, 1100 °C and 1200 °C). The structural transformations occurring in the films as a result of ammonolysis were studied using X-ray diffraction (XRD), atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). The XRD results have shown that the temperatures below 1100 °C were too low to obtain a pure NbN phase in the samples. The AFM observations indicate that the formation of the NbN phase and the size of NbN grains are related to the silica content in the layer. NbN grains become more regular and larger as the niobium content increases. The maximum grain size of about 100 nm was observed for x = 100. Preparation of the Nb₂O₅–SiO₂ sol–gel derived layers and the subsequent nitridation is a promising method of inducing crystalline NbN in amorphous matrices. It follows from the XPS results that a small amount of Nb₂O₅ remains in the films after nitridation at 1200 °C and that nitrogen reacted not only with Nb₂O₅ but also with SiO₂.     

Nanoparticle transport in water-unsaturated porous media: effects of solution ionic strength and flow rate

This paper presents the influence of ionic strength and flow on nanoparticle (NP) retention rate in an unsaturated calcareous medium, originating from a heterogeneous glaciofluvial deposit of the region of Lyon (France). Laboratory columns 10 cm in diameter and 30 cm in length were used. Silica nanoparticles (Au-SiO₂-FluoNPs), with hydrodynamic diameter ranging from 50 to 60 nm and labeled with fluorescein derivatives, were used to simulate particle transport, and bromide was used to characterize flow. Three flow rates and five different ionic strengths were tested. The transfer model based on fractionation of water into mobile and immobile fractions was coupled with the attachment/detachment model to fit NPs breakthrough curves. The results show that increasing flow velocity induces a decrease in nanoparticle retention, probably as the result of several physical but also geochemical factors. The results show that NPs retention increases with ionic strength. However, an inversion of retention occurs for ionic strength >5.10^?2 M, which has been scarcely observed in previous studies. The measure of zeta potential and DLVO calculations show that NPs may sorb on both solid-water and air-water interfaces. NPs size distribution shows the potential for nanoparticle agglomeration mostly at low pH, leading to entrapment in the soil pores. These mechanisms are highly sensitive to both hydrodynamic and geochemical conditions, which explains their high sensitivity to flow rates and ionic strength.