Gelation of poly(n-butylisocyanate) in benzene

Poly (n-butylisocyanate)-benzene solutions prepared by solubilization at 45°C, followed by aging at room temperature were found to be metastable for months, although, eventually, they separated into a birefringent polymer-rich phase and an isotropic solution. These metastable solutions, as well as isothermally phase-separated biphasic samples, flowed and exhibited dynamic moduli indicative of low polymer connectivity. By contrast samples prepared by a freeze-thaw cycle were uniformly and highly birefringent and showed network (gel) behavior at room temperature. The mechanism of gel formation is most likely the exclusion of the polymer from the benzene crystal during crystallization, forcing the polymer to align and exist at grain boundaries. Films formed from solutions have different moduli than those formed from gels, and are consistent with the proposed mechanism.     

Tetradecyltrimethylammonium bromide water-in-oil microemulsions: dependence of the minimum amount of alkanol required to produce a microemulsion with the alkanol and organic solvent topology

The amount of alcohol required to produce a microemulsion in a quaternary water-in-oil system was evaluated for a series of alcohols and hydrocarbon solvents of different size or topology. It was observed that the amount of n-hexanol and n-decanol required was similar in all the solvents considered. On the other hand, considerably higher concentrations of the branched alcohols (2,4-dimethyl-3-pentanol and 3-ethyl-3-pentanol) were required to produce the microemulsion, irrespective of the solvent topology (n-hexane or 2,2,4-trimethylpentane). From an analysis of the change in the analytical alcohol concentration with the surfactant concentration the amounts of alcohol present at the microaggregates' surface at the point of microemulsion formation were obtained. It is concluded that the high amounts of branched alcohols required are due to both less efficient incorporation at the interface and the larger number of alcohol molecules per surfactant required to stabilize the microemulsion.     

Synthesis and reactions of 4-isopropylidene-1-aryl-3-methyl-2-pyrazolin-5-ones

The reactions of 4-isopropylidene-1-aryl-3-methyl-2-pyrazolin-5-ones 4a-d were investigated under a variety of conditions. In the presence of thiols or piperidine, 4a-d failed to yield conjugate addition products, presumably due to the steric bulk provided by the two methyl substituents of the isopropylidene side chain. Reaction of 4a-d with hydrazine derivatives gave the 1-aryl-3-methyl-2-pyrazolin-5-ones 3a-d and isopropyl-hydrazones. Treatment of 4a with potassium cyanide yielded a stable conjugate addition product which exists as a mixture of tautomers in different solvents. Also, oxidation of 4a with hydrogen peroxide gave a spiroepoxide 22 , while m-chloroperbenzoic acid oxidation afforded both the spiroepoxide 22 , and a small quantity of a hydroxyspiroepoxide 23.     

Genomic clustering of the Trypanosoma cruzi nonlong terminal L1Tc retrotransposon with defined interspersed repeated DNA elements

We have analyzed the genomic distribution and organization of the long interspersed nucleotide element (LINE) L1Tc, a nonlong terminal repeat (LTR) retrotransposon of Trypanosoma cruzi. The results indicate that the L1Tc element is dispersed along the parasite genome and that in some regions it is organized in tandem repeats. The data allowed us to define the existence of short direct-repeated sequences flanking the genomic L1Tc elements. Relevant is the finding that the LINE L1Tc is located in genomic regions rich in short interspersed nucleotide elements (SINE)-like sequences. In particular, the L1Tc element is found associated to E13-related sequences, redefined in this work and renamed RS13Tc, and to a newly described RS1Tc sequence. The RS1Tc sequence is present, per haploid genome, in about 3,200 copies. Northern blot analysis showed that the RS1Tc is being transcribed into RNAs of different sizes. The analysis of the chromosomal distribution of these elements in various strains of T. cruzi suggested that this type of clustering might be a common feature of the genome of these parasites.     

Thermal properties of N-substituted 4-vinylpyridinium ions and their polymers

4-Vinylpyridinium trifluoromethanesulfonate monomers substituted at nitrogen with H, O, CH₃, C₂H₅, C₆H₁₃, and C₁₂H₂₅ were synthesized and characterized spectroscopically. Thermal analyses (DSC and TGA) were carried out on all the compounds. The solid monomers (N? H, N? CH₃, N? C₆H₁₃, and N? C₁₂H₂₅) exhibited endothermic melting followed by exothermic polymerization and exothermic decomposition (>400°C). Liquid N? C₂H₅ monomer revealed only exothermic polymerization and decomposition. The N? O polymer underwent thermal decomposition below 300°C. The N–C₁₂H₂₅ homopolymer, prepared from monomer in the DSC or in bulk, displayed an unusual thermal transition at 250°C, which has been attributed to a polymer backbone reorientation leading to side-chain ordering of the dodecyl groups.     

Polymerizable surfactant design for transmission electron microscopy

Polymerized liposomes and vesicles are under close scrutiny as long-lived, stable substitutes for their natural and synthetic unpolymerized counterparts. The monomer surfactant, which contains one or more polymerizable groups, is dispersed in water at the proper temperature and concentration to form the lyotropic liquid crystalline phase of interest and polymerized while in the liquid crystalline state. In addition to their applications to slow-release and site-specific drug delivery, membrane-mediated chemistry, artificial photosynthesis, etc., polymerized surfactant liposomes and vesicles hold great promise as model systems for TEM investigations of lamellar liquid crystal structure. One such model polymerizable surfactant is DBPAl, or N,N-dimethyl-N,N-bis(1,3-pentadecadienyl-carbonyloxyethyl) ammonium iodide. Polarized light microscopy and differential scanning calorimetry (DSC) confirm that DBPAI forms lamellar liquid crystalline liposomes in water. The DBPAI liposomes were polymerized while in the liquid crystalline state by ultraviolet (UV) irradiation. The DBPAI liposomes were shown to be identical in structure before and after polymerization by a combination of X-ray diffraction and freeze-fracture TEM. However, turbidity measurements showed that the polymerized DBPAI liposomes were much more stable in acetone and ethanol than the monomer DBPAI liposomes, demonstrating that the chemical nature of the surfactant in the liposome had changed. The combination of structural preservation and enhanced chemical stability makes DBPAI a natural choice for TEM thin-sections. A method of preparing DBPAI liposomes for thin-section TEM is outlined and bilayer resolution images of the DBPAI liposomes are presented. Polymerized bilayers in thin-section TEM promise the enhanced resolution required to answer many important structural questions left unresolved by freeze-fracture TEM.     

Anti-Inflammatory,Antidiabetic Properties and In Silico Modeling of Cucurbitane-Type Triterpene Glycosides from Fruits of an Indian Cultivar of Momordica charantia L.

Diabetes mellitus is a chronic disease and one of the fastest-growing health challenges of the last decades. Studies have shown that chronic low-grade inflammation and activation of the innate immune system are intimately involved in type 2 diabetes pathogenesis. Momordica charantia L. fruits are used in traditional medicine to manage diabetes. Herein, we report the purification of a new 23-O-β-d-allopyranosyl-5β,19-epoxycucurbitane-6,24-diene triterpene (charantoside XV, 6) along with 25ξ-isopropenylchole-5(6)-ene-3-O-β-d-glucopyranoside (1), karaviloside VI (2), karaviloside VIII (3), momordicoside L (4), momordicoside A (5) and kuguaglycoside C (7) from an Indian cultivar of Momordica charantia. At 50 µM compounds, 2–6 differentially affected the expression of pro-inflammatory markers IL-6, TNF-α, and iNOS, and mitochondrial marker COX-2. Compounds tested for the inhibition of α-amylase and α-glucosidase enzymes at 0.87 mM and 1.33 mM, respectively. Compounds showed similar α-amylase inhibitory activity than acarbose (0.13 mM) of control (68.0–76.6%). Karaviloside VIII (56.5%) was the most active compound in the α-glucosidase assay, followed by karaviloside VI (40.3%), while momordicoside L (23.7%), A (33.5%), and charantoside XV (23.9%) were the least active compounds. To better understand the mode of binding of cucurbitane-triterpenes to these enzymes, in silico docking of the isolated compounds was evaluated with α-amylase and α-glucosidase.     

Solving second-order differential equations with variable coefficients

A method is developed in which an analytical solution is obtained for certain classes of second-order differential equations with variable coefficients. By the use of transformations and by repeated iterated integration, a desired solution is obtained. This alternative method represents a different way to acquire a solution from classic power series techniques and other approaches. It is, at times, more involved than traditional methods.     

Consequences of weak Allee effect on prey in the May–Holling–Tanner predator–prey model

In this work, a modified Holling–Tanner predator–prey model is analyzed, considering important aspects describing the interaction such as the predator growth function is of a logistic type; a weak Allee effect acting in the prey growth function, and the functional response is of hyperbolic type. Making a change of variables and time rescaling, we obtain a polynomial differential equations system topologically equivalent to the original one in which the non‐hyperbolic equilibrium point (0,0) is an attractor for all parameter values. An important consequence of this property is the existence of a separatrix curve dividing the behavior of trajectories in the phase plane, and the system exhibits the bistability phenomenon, because the trajectories can have different ω ? limit sets; as example, the origin (0,0) or a stable limit cycle surrounding an unstable positive equilibrium point. We show that, under certain parameter conditions, a positive equilibrium may undergo saddle‐node, Hopf, and Bogdanov–Takens bifurcations; the existence of a homoclinic curve on the phase plane is also proved, which breaks in an unstable limit cycle. Some simulations to reinforce our results are also shown. Copyright © 2015 John Wiley & Sons, Ltd.     

Electrodes based on zeolites modified with cobalt and/or molybdenum for pesticide degradation: part II—2,4,6-trichlorophenol degradation

Journal of Solid State Electrochemistry - 2,4,6-trichlorophenol (TCP) is a persistent pollutant introduced in water by industrial processes and pesticides. We have studied the electrooxidation of...