Influence of heat treatment conditions on the porosity changes of sulfonated styrene/divinylbenzene copolymers

Sulfonic cation exchangers with two ion exchange group concentrations (0.5 and 2.4 mmol/g, samples A and B, respectively) were obtained by sulfonation of a porous styrene (S) and divinylbenzene (DVB) copolymer with chlorosulfonic acid. Strong thermal decomposition of the sulfonated copolymer A, accompanied by significant changes in its porous structure, starts at ca. 400°C. The char has no sulfonic groups. After heat treatment at 400°C in steam, a sorbent was obtained (yield 65%) that shows higher phenol sorption than the untreated sample when related to the bed volume. The chlorosulfonic derivatives of the initial copolymer were less thermally resistant than the sulfonic ones obtained by hydrolysis. Pyrolysis of the cation exchanger B, in its H+ and Ca²⁺ forms, was carried out at 900°C (yield of both chars close to 30%). By subsequent steam activation at 800°C to a 50% burn-off of the char, sorbents with well-developed, but distinctly different, porous structures were obtained. The activated char from the sulfonated copolymer in its hydrogen form was highly microporous and indicated an effective surface area of 1180 m²/g. However, because of a low contribution of mesopores, its ability to adsorb phenol from the liquid phase was not very high. The activated char from the calcium-doped copolymer, indicating a smaller surface area (580 m²/g) but characterized by a well-developed mesoporosity, was a better sorbent for phenol. © 1994 John Wiley & Sons, Inc.     

Multinuclear magnetic resonance study of some mesoionic oxatriazoles containing nitrogenous exocyclic groups

¹H,¹³C,¹⁴N and¹⁵N NMR measurements are reported for four mesoionic 1-oxa-2, 3, 4-triazoles containing exocyclic nitrogenous groups. The NMR signal assignments are discussed and compared with those previously published for some corresponding oxatriazoles. The results obtained support the proposed cyclic mesoionic structures for the compounds studied. The questions of possible charge delocalization and valence tautomerism are addressed. Compound with N^– H as a exocyclic group (Fig. 1) is found to be relatively unstable, this is attributed to proton migration in the corresponding non-cyclic form of this molecule.Published in Khimiya Geterotsikiicheskikh Soedinenii, No. 9, pp. 1260–1263, September, 1995.     

General characteristics of the copper-based mercury film electrode

The optimum conditions for the preparation, storage, conditioning and renewal of copper-based mercury film electrodes (CBMFEs) are given. The voltammetric results obtained at these electrodes are compared with the predictions of the theory of cyclic and stripping voltammetry at the mercury film electrode, as well as with the results obtained at the silver-based and the platinum-based mercury film electrodes. The advantage of a CBMFE is prolonged life-time, whereas the disadvantages ar the decreased range of usable positive potentials and the possibility of interfering reactions of the electrodeposited metals with the copper substrate or copper dissolved in the mercury phase. The presence of copper has no essential influence on the behaviour of lead and thallium; it affects the behaviour of zinc markedly and that of cadmium and indium slightly. The conditions allowing the minimization of the harmful action of copper on the behaviour of cadmium and indium have been found.     

Darstellung und Strukturen einiger N-(Tri-t-butoxysilyl)anilin-Derivate

Formation and Structures of N-(tri-t-butoxysilyl)aniline Compounds Para-substituted N-(tri-t-butoxysilyl)anilines (t-BuO)₃SiNRC₄H₄X-p, R = H, CH₃, with substituents of high electron affinity (X = CN, NO₂) were prepared by a one-pot reaction of tri-t-butoxychlorsilane, potassium t-butanolate and substituted anilines. Corresponding compounds with substituents of low electron affinity (X = OMe, H) preferably were prepared by metalation of anilines with sodium amide. Four crystal structures were determined. N-(tri-t-butoxysilyl)-p-nitro-aniline, N-methyl-(N-tri-t-butoxysilyl)-p-nitroaniline and N-(tri-t-butoxysilyl)-p-cyanoaniline crystallize at 298 K monoclinically, N-(tri-t-butoxysilyl)aniline crystallizes orthorhombically.     

Calorimetric studies of refractory corundum

Calorimetry has been used in the investigations of calcium aluminate materials produced as a binder for aluminate-corundum composites of high refractoriness. The kinetics and of hydration process was thus characterized and the optimum compositions of initial binders and cement-corundum refractory filler blends could be selected for further tests. The acceleration of heat evolution - the shortening of so-called induction period and relatively high heat output in the presence of corundum was observed. It means the acceleration of hydration process, that is early crystallisation of hydration products and subsequent further dissolution of initial anhydrous aluminate phases. In the presence of fine grained corundum particles these phenomena should be attributed to the nucleating effect of fine corundum particles. This revised version was published online in July 2006 with corrections to the Cover Date.     

Cationic Heteroconjugation Constants in the OHN+ and NHO+ Systems in Propylene Carbonate: Dependence on Difference in Basicity

Cationic heteroconjugation equilibria of more than ninety systems consisting of substituted pyridines, their N-oxides, and trimethylamine N-oxide, i. e., in systems with mixed hydrogen bridges of type OHN⁺ (NHO⁺) were studied in propylene carbonate. Both experimental systems without proton transfer, BH⁺/B₁, and those with proton transfer, B₁H⁺/B, were explored. The stability of the mixed hydrogen bridges, OHN⁺ (NHO⁺), is compared with that of the OHC⁺-type bridges. The influence of the difference in basicity of the conjugate base of the proton donor and the proton acceptor on the presence of the proton transfer equilibria, and, consequently, the possibility of determination of the cationic heteroconjugation constant values is discussed.     

Die Struktur des Tetraphenyldisiloxans

Structure of Tetraphenyldisiloxane Tetraphenyldisiloxane 1 crystallizes at 298 K monoclinically (P2₁/n; a = 1407.6; b = 610.7; c = 1262.7 pm; β = 95.87° Z = 2) and undergoes a second order phase transition at 200 K, in an almost unchanged structure of triclinic symmetry. At 298 K the molecules are already bent (Si? O? Si = 160°) with static or dynamical disorder of the bridging atom. Both Si? O distances are different (156 or 169 pm), because the shift of the bridging O atom is not perpendicular to the Si? to? Si vector. The reason for this remarkable behavior is not yet clear. According to the vibrational spectra, the Si? O? Si bridge is bent in the crystal but, in CCl₄ solution a dynamical oscillation through the linear configuration may occur.     

Die Struktur des Pentaphenyldisilans

Structure of Pentaphenyldisilane For the first time Pentaphenyldisilane was prepared by Gilman and Goodman. It is produced by the reaction of Ph₃SiLi with Ph₂ClSiH. The crystal structure presents an ideally staggered conformation. The distance d(Si? Si) = 235.7 pm corresponds to a normal single bond length. This emphasizes the complete relief of the central Si? Si bond by the insertion of only one hydrogen atom.     

Beiträge zur Chemie der Silicium-Schwefel-Verbindungen. 46 [1]. 29Si-NMR-chemische Verschiebungen von Trialkoxysilylthioderivaten der Permethylpolysilane

Contributions to the Chemistry of Silicon-Sulphur Compounds. 46. ²⁹Si-N.M.R. Chemical Shifts of Trialkoxysilylthio Derivatives of Permethylpolysilanes ²⁹Si-N.M.R. chemical shifts of trialkoxysilythio derivatives of permethylpolysilanes of the two series: α, ω-(RO)₃SiS(SiMe₂)_nSSi(OR)₃, n = 2, 3, 4, 6 and 1-(RO)₃SiS(SiMe₂)_nMe, n = 2, 4; R = i-Pr, t-Bu and also ³¹C-NMR shifts are given. The relationship of ²⁹Si-NMR chemical shift from the netto charge at the silicon atom q(Si) which value has been corrected according to the Sandorfy C quantum-chemical model is discussed. The greater reduction of the electron density at silicon in compounds with Si? X bond (X = S, P, Cl) has been explained by a conjugation of the lone of sulphur with the Si? X bonding pair.