Liquid chromatography/electrospray tandem mass spectrometry method for the quantitation of fosinoprilat in human serum using automated 96-well solid-phase extraction for sample preparation

A sensitive, specific, accurate and reproducible liquid chromatography/electrospray tandem mass spectrometry method was developed and validated for the quantitation of fosinoprilat in 0.2 mL of human serum. The method employed acidification (with pH 4.0 sodium acetate buffer) of the serum samples to minimize the hydrolysis of the prodrug fosinopril to fosinoprilat prior to purification by automated 96-well solid-phase extraction. The required chromatographic separation of fosinoprilat and fosinopril was achieved isocratically on a Luna C8 analytical column (2 x 50 mm, 3 microm). The total run time was 2 min. The mobile phase contained methanol and water with 10 mM ammonium acetate. Detection was by positive ion electrospray tandem mass spectrometry. The standard curve, which ranged from 2.00 to 500 ng/mL, was fitted to a 1/x(2) weighted linear regression model. Fosinoprilat quality control (QC) samples used to determine the accuracy and precision of the method were prepared in human serum at concentrations of 5.00, 200, 400 and 1000 ng/mL. The assay accuracy was within 8% (dev). The intra- and inter-assay precisions were within 6 and 3% (RSD), respectively. Fosinopril QC samples used to gauge the rate of hydrolysis of fosinopril to fosinoprilat during the assay procedure were prepared in human serum at 500 ng/mL. The hydrolysis of fosinopril to fosinoprilat was 相似文献   

Increased throughput in quantitative bioanalysis using parallel-column liquid chromatography with mass spectrometric detection

The feasibility of quantitative bioanalysis by parallel-column liquid chromatography in conjunction with a conventional single-source electrospray mass spectrometer has been investigated using plasma samples containing a drug and its three metabolites. Within a single chromatographic run time, sample injections were made alternately onto each of two analytical columns in parallel at specified intervals, with a mass spectrometer data file opened at every injection. Thus, the mass spectrometer collected data from two sample injections into separate data files within a single chromatographic run time. Therefore, without sacrificing the chromatographic separation or the selected reaction monitoring (SRM) dwell time, the sample throughput was increased by a factor of two. Comparing the method validation results obtained using the two-column system with those obtained using the corresponding conventional single-column approach, the methods on the two systems were found to be equivalent in terms of accuracy and precision. The parallel-column system is simple and can be implemented using existing laboratory equipment with no additional capital outlays. A parallel-column system configured in this manner can be used not only for the within-a-run analysis of two samples containing two different sets of chemical entities, but also for the within-a-run analysis of two samples containing the same set of chemical entities.     

X-ray determination of the mean amplitudes of vibration and debye temperatures of some rare earth monochalcogenides

The x-ray diffraction intensities of Bragg reflections have been measured at room temperature for thulium selenide, samarium sulphide, samarium selenide and samarium telluride. On the basis of a common amplitude approximation, the Debye-Waller factor, the mean amplitude of vibration and the Debye temperature have been evaluated. The values of the Debye temperatures and mean amplitudes of vibration are 176±16°K, 0·185 ± 0·017 Å (TmSe), 155 ± 7°K, 0·244 ± 0·012 Å (SmS), 153 ± 14°K, 0·221 ± 0·020 Å (SmSe) and 151 ± 20°K, 0·204 ± 0·027 Å (SmTe).     

Analysis of coefficient identification problems associated to the inverse Euler-Bernoulli beam theory

A rigorous investigation of the identification of a heterogeneousflexural rigidity coefficient in the Euler-Bernoulli steady-statebeam theory in the presence of a prescribed load is presented.Mathematically, this study is an extension to higher-order differentialequations of the coefficient identification problem analysedby Marcellini (1982) for the one-dimensional Poisson equation.In addition, various types of boundary conditions are discussed.Conditions for the well-posedness of these inverse problemsare established and, furthermore, numerical results obtainedusing a regularization algorithm are presented.     

A critical investigation of the effects of the radio frequency potential on the trapping of externally injected ions in ion trap mass spectrometry

The sensitivity of all ion trap mass spectrometry (ITMS) methods is dependent on the trapping efficiency of the instrument. For ITMS instruments utilizing external ion sources, such as laser desorption, trapping efficiency is known to depend on the phase and amplitude of the radio frequency (RF) potential applied to the ring electrode at the time of ion introduction. It is remarkable that, in a considerable body of literature, no consensus exists regarding the effects of these parameters on the efficacy of trapping externally generated ions. In this paper, a summary of the literature is presented in order to highlight significant discrepancies. New laser desorption ion trap mass spectrometry (LD-ITMS) data are also presented, from which conclusions are drawn in our effort to clarify some of the confusion. Copyright 1999 John Wiley & Sons, Ltd.     

Liquid chromatography/tandem mass spectrometry methods for quantitation of mevalonic acid in human plasma and urine: method validation,demonstration of using a surrogate analyte,and demonstration of unacceptable matrix effect in spite of use of a stable isotope analog internal standard

Selective, accurate, and reproducible liquid chromatography/tandem mass spectrometry (LC/MS/MS) methods were developed and validated for the determination of mevalonic acid, an intermediate in the biosynthesis of cholesterol and therefore a useful biomarker in the development of cholesterol lowering drugs, in human plasma and urine. A hepta-deuterated analog of mevalonic acid was used as the internal standard. For both methods, calibration standards were prepared in water, instead of human plasma and urine, due to unacceptably high levels of endogenous mevalonic acid. The lower quality control (QC) samples were prepared in water while the higher QC samples were prepared in the biological matrices. For the isolation/purification of mevalonic acid from the plasma and urine matrices, the samples were first acidified to convert the acid analyte into its lactone form. For the plasma samples, the lactone analyte was retained on and then eluted off a polymeric solid-phase extraction (SPE) sorbent. For the urine method, the sample containing the lactone analyte was passed through a C-18 SPE column, which did not retain the analyte, with the subsequent analyte retention on and then elution off a polymeric SPE sorbent. Chromatographic separation was achieved isocratically on a polar-endcapped C-18 analytical column with a water/methanol mobile phase containing 0.5 mM formic acid. Detection was by negative-ion electrospray tandem mass spectrometry. The standard curve range was 0.500-20.0 ng/mL for the plasma method and 25.0-1,000 ng/mL for the urine method. Excellent accuracy and precision were obtained for both methods at all concentration levels tested. It was interesting to note that for certain batches of urine, when a larger sample volume was used for analysis, a high degree of matrix effect was observed which resulted not only in the attenuation of the absolute response, but also in a change of analyte/internal standard response ratio. This demonstrated that, under certain conditions, the use of a stable isotope analog internal standard does not, contrary to conventional thinking, guarantee the constancy of the analyte/internal response ratio, which is a prerequisite for a rugged bioanalytical method. On the other hand, under conditions where the sample matrix does not have such a deleterious effect, we have found that a stable isotope analog could serve as a surrogate (substitute) analyte. Thus, we have shown that using calibration standards prepared by spiking plasma with tri-deuterated or tetra-deuterated mevalonic acid, instead of mevalonic acid itself (the analyte), plasma QC samples that contain mevalonic acid can be successfully analyzed for the accurate and precise quantitation of mevalonic acid. The use of a surrogate analyte provides the opportunity to gauge the daily performance of the method for the low concentration levels prepared in the biological matrix, which otherwise is not achievable because of the endogenous concentrations of the analyte in the biological matrices.     

High-performance liquid chromatographic determination of 1-beta-D-arabinofuranosyl-E-5-(2-bromovinyl)uracil and its metabolite (E)-5-(2-bromovinyl)uracil in serum.

A high-performance liquid chromatographic method was developed to assay 1-beta-D-arabinofuranosyl-E-5-(2-bromovinyl)uracil and its metabolite (E)-5-(2-bromovinyl)uracil in serum. The chloro analogue of the parent drug is used as internal standard. Human serum samples were assayed to establish the pharmacokinetic parameters. Acetonitrile, used as a protein precipitant, was evaporated to dryness and the residue, containing the analytes and internal reference, was dissolved in mobile phase prior to chromatographic analysis. The minimum quantifiable level was 0.02 micrograms of each analyte per ml of serum.