Determination of DNA using sodium 9,10-anthraquinone-2-sulfonate as an in situ photochemical fluorescence probe

An in situ photochemical fluorescence probe method for the determination of DNA with sodium 9,10-anthraquinone-2-sulfonate (AQS) as a photochemical fluorescence probe was developed. It was based on the conversion of AQS into an intensively fluorescent product by irradiating with UV radiation. The photochemical reaction is retarded by DNA. The determination can be carried out by measuring the fluorescence intensity at a fixed time. The calibration graph was linear in the range 0–80 ng ml⁻¹ calf thymus (CT) DNA (r = 0.9991), the limit of detection was 3.2 ng ml⁻¹ CT DNA (n = 9). The kinetic behaviour of the photochemical reaction and the effects of experimental conditions were investigated and discussed in detail. The results of absorption spectra and competitive binding experiments suggested the interaction between AQS and DNA to be intercalative.     

Spectroscopic and Binding Properties of Berberine to DNA and Its Application to DNA Detection

Berberine(BER) binds to the double helical DNA with a high affinity There is only a much smaller hypochromism and no shifts in the absorption spectra when BER binds to calf thymus DNA(CT DNA) The fluorescence yields increase dramatically when BER binds to DNA, with no shifts in the emission maximum. These spectral changes are in contrast to the behavior observed with many fluorescent intercalates Groove binding rather than intercalation was suggested to be the cause of these spectral changes. Consistent with groove binding, for polyamide anion quenching studies showed that the magnitude of K_sv of the bound BER was higher than that of the free BER. The addition of salt to the solution releases the DNA-bound drug action from the groove and causes a decrease in the fluorescence yield. The results of all above studies proved the groove binding of BER to DNA. The large fluorescence enhancements observed when BER binds to DNA and the poor fluorescence yield of BER in the absence of DNA can be used for sensitive detection of DNA The linear concentration range was 0–20μg/ml The limit of detection for CT DNA was 12 ng/ml     

微波萃取高效液相色谱法测定口红中芳香胺类化合物

利用微波萃取高效液相色谱法测定了口红中芳香胺类化合物.先将口红涂于玻璃片上,然后用微波萃取和高效液相色谱法测定萃取液中的芳香胺类化合物.研究了3种市售口红并得到了芳香胺类化合物的定量测定结果.考察了微波萃取的条件,并将薄层色谱等萃取分离方法和微波萃取法进行了比较,证明微波萃取法在萃取膏状物和蜡状物中的组分时,具有比其它方法更加方便、快速等优点.     

氨基硅球表面印迹牛血清白蛋白分离条件的初步探讨

采用固定模板蛋白表面印迹的方法,在氨丙基衍生的硅球表面制备溶胶-凝胶印迹聚合物识别牛血清白蛋白.以该体系为例对制备蛋白质印迹聚合物的各个基本参数与分离选择性的关系进行研究.结果表明,用正辛基三甲氧基硅烷、氨丙基三乙氧基硅烷、四乙氧基硅烷在摩尔比为42.5:42.5:15,酸度为pH 7.0时进行聚合,并采用01 mol/L NaOH与10%(V/V) HAc-10%(m/V) SDS联用的方法洗脱固定的模板蛋白,由此制备的印迹聚合物的分离选择性能较好;并初步讨论了识别蛋白质的机理.     

Protein imprinted polymer using acryloyl-β-cyclodextrin and acrylamide as monomers

A novel protein imprinted polymer was prepared using acryloyl-β-cyclodextrin (β-CD) and acrylamide as monomers on the surface of silica gel. The bovine hemoglobin was used as template and β-CD was allowed to self-assemble with the template protein through hydrogen bonding and hydrophobic interaction. Polymerization was carried out in the presence of acrylamide as an assistant monomer, which resulted in a novel protein imprinted polymer. After removing the template, imprinted cavities with the shape and spatial distribution of functional groups were formed. Bovine serum albumin (BSA) cytochrome c (Cyt) and lysozyme (Lyz) were employed as non-template proteins to test the imprinting effect and the specific binding of bovine hemoglobin to the polymer. The results of the adsorption experiments indicated that such protein imprinted polymer, which was synthesized with β-CD and acrylamide as monomers, could selectively recognize the template protein.     

Study on the fluorescence resonance energy transfer between CdTe QDs and butyl-rhodamine B in the presence of CTMAB and its application on the detection of Hg(II)

The thioglycolic acid-functionalized CdTe quantum dots (QDs) were synthesized in aqueous solution using safe and low-cost inorganic salts as precursors. Fluorescence resonance energy transfer (FRET) system was constructed between CdTe QDs (donor) and butyl-rhodamine B (BRB) (acceptor) in the presence of cetyltrimethylammonium bromide (CTMAB). CTMAB micelles formed in water reduced the distance between the donor and the acceptor significantly and thus improved the FRET efficiency, which resulted in an obvious fluorescence enhancement of the acceptor. Several factors which impacted the fluorescence spectra of the FRET system were studied. The energy transfer efficiency (E) and the distance (r) between CdTe and BRB were obtained. The feasibility of the prepared FRET system as fluorescence probe for detecting Hg(II) in aqueous solution was demonstrated. At pH 6.60, a linear relationship could be established between the quenched fluorescence intensity of BRB and the concentration of Hg(II) in the range of 0.0625-2.5mumolL(-1). The limit of detection was 20.3nmolL(-1). The developed method was proved to be sensitive and repeatable to detect Hg(II) in a wide range in aqueous solutions.     

修饰硅胶表面印迹牛血红蛋白及其识别性能的研究

本文选用马来酸酐修饰后的硅胶作为载体,丙烯酰胺为功能单体,N,N’-亚甲基双丙烯酰胺为交联剂,牛血红蛋白为模板分子,采用氧化还原悬浮聚合法,合成了具有选择性识别的牛血红蛋白分子印迹聚合物。并用红外光谱(IR)、扫描电子显微镜(SEM)对聚合物进行了表征,结果表明载体表面成功接枝了分子印迹聚合物薄层。同时,选择性吸附实验表明分子印迹聚合物的具有良好的识别性能,能成功的实现水溶液中牛血红蛋白的富集。     

杯芳烃衍生物和丙烯酰胺作为复合功能单体的分子印迹聚合物对海因类化合物的选择性识别研究

以杯[4]芳烃衍生物+丙烯酰胺作为复合功能单体,将其运用到分子印迹技术中,对海因类化合物R-苄基海因进行选择性识别.研究结果表明,由单一的杯[4]芳烃衍生物或丙烯酰胺作为功能单体的分子印迹聚合物对R-苄基海因的选择性均不高,而由杯[4]芳烃衍生物+丙烯酰胺作为复合功能单体的分子印迹聚合物对模板分子具有较高的特异选择性.     

光谱法研究Ge-132与DNA的作用机理

利用吸收光谱、DNA碱变性曲线、荧光光谱研究了Ge-132与DNA的相互作用。在Ge-132存在下,DNA的紫外吸收光谱产生明显的减色效应。同时,Ge-132的存在使DNA碱变性的pH值增大,变性后增色效应减小,实验结果表明,Ge-132主要是以嵌入方式与DNA结合的。