高压沿面放电烟气脱硫技术动态实验研究

本文针对高压沿面放电活化气体的烟气脱硫技术,在静态实验研究的基础上进行了实验室冷态动态的实验研究。设计了便于反应和测量的动态实验装置。实验解释了电子束法脱硫技术中导致氨气泄漏的部分原因,验证了高压沿面放电脱硫技术可以在较低的运行电压下,达到提高脱硫效率,减少氨气泄漏的作用。     

α碘-α-甲氧羰亚甲基三苯胂的合成及其与芳醛的反应

胂叶立德分子中砷原子是以4 d 轨道稳定α-碳负离子,比相应的膦叶立德具有更强的亲核性,甲氧羰亚甲基三苯胂能与醛、酮顺利反应。因此,研究稳定的胂叶立德更具有合成     

Determination of total mercury and methylmercury in human hair by graphite-furnace atomic absorption spectrophotometry using 2,3-dimercaptopropane-1-sulfonate as a complexing agent.

For the determination of total mercury in hair, an amount (25.0 mg) of hair sample was digested with conc. HNO3 (400 microl) at 90 degrees C for 10 min in a 7-ml teflon microreaction vessel. After digestion, the pH of the acidic hair mixture was adjusted to 5.0-6.0 by NaOH and was then passed through a clean-up Sep-Pak C18 cartridge. To the eluate, 2,3-dimercaptopropane-1-sulfonate (DMPS) and sodium acetate buffer (pH = 6.0) were added to form a mercury-DMPS complex. This complex was preconcentrated on two Sep-Pak C18 cartridges in series, and each cartridge was eluted with methanol and adjusted to 2.00 ml. A portion (50 microl) was introduced into a graphite cuvette and then atomized according to a temperature program. The method detection limit (MDL, 3sigma) was 0.064 (microg g(-1)); the calibration graph was linear up to 7.52 microg g(-1). Good accuracies were obtained when testing two human hair certified reference materials (GBW 09101 and BCR-397). Six real samples were analyzed, and the recoveries were 95.8 - 98.2% with a relative standard deviation (RSD, n = 3) < 2.1%. For the determination of methylmercury (CH3Hg+), 25.0 mg of hair sample was extracted with 2.0 mol dm(-3) HCl (1.0 ml) by ultrasonicating for 1 h. The supernatant solution was used for CH3Hg+ analysis and the hair residue was used for the analysis of inorganic mercury (Hg2+). The MDL of CH3Hg+ was 0.068 microg g(-1); the calibration graph was linear up to 6.00 microg g(-1). Six real samples were analyzed, and the recoveries were 96.0-99.2% with RSD (n = 3) < 2.3%. The sum of the concentrations of CH3Hg+ and Hg2+ was very close to that of the total mercury measured with a relative error within 3.6%. The proposed method can be accurately applied to the measurement of CH3Hg+, Hg2+, and total mercury in hair samples.     

过氧化氢与N—甲基苯胺盐酸盐引发体系的研究

在水介质中,研究了新型的过氧化氢/N-甲基苯胺盐酸盐引发体系对 AM 与 PVA 的接枝共聚。产物经紫外光谱、红外光谱和 ~1H-核磁共振进行表征,并提出了引发机理。     

EFFECT OF FLAME SUPPORT LAYER GEOMETRY AND MATERIALS ON THE RADIANT EFFICIENCY OF GAS RADIANT BURNERS

Parallel rods / tubes flame support layers were used to study variations in geometry and materials on radiant burner performance. An increased density of rods increased the efficiency, as more surface area was provided to extract the heat of combustion. This effect was attenuated far fraction closed areas above 0·33 because of increased interference of direct base-to-load radiation. Thinner rods (with fraction closed area constant), having a lower thermal conduction resistance, fostered higher efficiency. Greater distances between the base and rods decreased efficiency due to air entrainment. This functioned to cool the base, increasing the range of combustion intensities where a portion of combustion lifted from the burner base. Isolation of radiating materials from conducting to the burner housing resulted in a ～ 5% upward shift in efficiency. Low to high efficiency was measured for alumina, mullite, and oxidized stainless steel rods, respectively; this was related directly to the emittances of the materials used. SiC and MoSi₂ coatings on alumina rods resulted in burners which were as efficient as one with stainless steel rods. A burner designed as a restricted band spectral emitter was not as efficient in its high-emission range as a more graybody emitter under the same combustion intensity; the higher-temperature spectral emitter discouraged extraction of sensible heat from the combustion product stream.     

A immunosuppressive triterpenoid saponin from the stems of Epigynum griffithianum

Abstract

Chemical investigation of the stems of Epigunum griffithianum led to the isolation and identification of a new triterpenoid saponin (1) and two known compounds (epigynosides A (2) and B (3)). These structures were elucidated by means of spectroscopic analysis (1D and 2D NMR, MS, UV, IR) as well as comparison with the reported data. Compound 1 was evaluated in vitro for the immunosuppressive activities on proliferation of mice splenocyte and displayed significant immunosuppressive activities compared to the positive control (dexamethasone) with the concentration at 25?μM.     

Biosafety evaluation and quantitative determination of poly(hexamethylene biguanide) (PHMB) coated on cellulosic fabrics by Kubelka–Munk equation

Cellulose - It is difficult to directly determine the quantity of cationic finishing agents on the surface of cellulosic fabrics. Herein, we report a direct and feasible method by...     

Enantiomeric separations of four basic drugs containing N-alkyl groups by a RP-HPLC system using SBE-β-CD as chiral mobile phase additive

The chiral separations of four pharmaceutical racemates which contain N-alkyl groups were satisfactorily resolved using SBE-β-CD as a chiral mobile phase additive(CMPA)in a RP-HPLC system(the resolution is 2.701 for ondansetron hydrochloride,1.996 for sulpiride,1.293 for clenbuterol hydrochloride and 0.816 for omeprazole).In addition,the effects of different parameters such as CD type and CD concentration were investigated.The separation mechanism arises through the combination of several potential interactions,including electrostatic interactions as well as hydrogen bonding interactions and hydrophobic inclusion interactions,which allow for the SBE-β-CD–drug complexation with strong stereoselectivity and stability.The resolution also relates to the number and location of N atoms in the enantiomers.This method will be applicable to the isolation of various types of biologically important enantiomers containing N-alkyl groups.     

Synthesis,Crystal Structure and Luminescent Property of Cadmium Complex Based on 2-（2-（1Hbenzo[d]imidazol-2-yl）benzyl）-1H-benzo[d]-imidazole

The complex [Cd(bbb)Cl2]·DMF·H2O, where bbb is 2-(2-(1H-benzo[d]imidazol-2-yl)benzyl)-1H-benzo[d]imidazole, was synthesized and characterized by X-ray single-crystal structure analyses. For the complex: C24H25Cl2CdN5O2, Mr = 598.77, crystal system, triclinic, space group P1, a = 9.9878(12), b = 10.0008(12), c = 13.2217(15) , α = 80.674(2), β = 72.158(2), γ = 86.776(2)°, V = 1240.5(3) 3, Z = 2, Dc = 1.598 g/cm3, λ = 0.71073, μ(MoKα) = 1.127 mm–1, F(000) = 600, S = 1.04, R = 0.0905 and wR = 0.3088 for 4805 observed reflections with I 2σ(I). It is a neutral complex. The distorted tetrahedral geometry of cadmium ion is coordinated by two nitrogen atoms of ligand and two chloride ions. The complex emits blue green luminescence with emission peaks at 480 nm in DMF solution.