氢化丁苯共聚物结构的核磁共振波谱表征Ⅱ.微观结构的定量计算

在氢化丁苯共聚物¹³C-NMR谱脂肪碳部分谱带归属的基础上,根据各谱带的主要来源,推导出六个二单元浓度的计算公式。计算出二单元、一单元的相对含量,各结构单元的数均序列长度、嵌段含量和其它结构参数。加氢前后的¹H-和¹³C-NMR谱的组成计算结果基本一致。初步探讨了作为粘度指数改进剂的氢化丁苯共聚物微观结构与性能的关系,为合成提供了依据。     

付里叶变换红外光谱仪的操作参数对光谱的影响

本文以二苯基甲酮的ＫＢｒ压片为标样，在Ｂｒｕｋｅｒ ＩＦＳ １２０ＨＲ付里叶变换红外光谱仪上系统考察了该仪器折一些重要操作参数（光源光栏、切趾函数、扫描速度）对光谱质量（信噪比，分辨率）的影响。从而获得了测样时的优化操作条件。     

锆氢化反应研究 Ⅰ.酯类及双官能团化合物的锆氢化反应

本工作以一氯一氢二茂锆为还原试剂,对苯甲酸苯乙酯和苯甲酸甲酯进行还原,对还原的条件及水解产物的分离鉴定进行了研究。并对同时含酯基与其它官能团的几种化合物进行了选择性还原,列出了官能团还原先后的顺序,对结果进行了讨论。     

STUDY ON STYRENE-BUTADIENE BLOCK COPOLYMER FOR THE MODIFICATI0N OF TIRE TREAD

This paper mainly deals with the design and synthesis of a novel styrene-butadieneblock copolymer. When this copolymer is used in the tread portion of tyres, it can improvewet skid resistance and reduce rolling resistance without sacrificing its general physical-mechanical properties. The visco-elastic curve of tire tread using the novel copolymer asits rubber portion was showed. Reactivity ratios for two monomers in the polymerizingsystem were calculated. The diagrams of differelitial, integral and finite difference calculithroughout the whole molecular chain were presented. The influence of the micro- andmacro-structure of the copolymer chain on wet skid resistance and rolling resistance wasdiscussed     

Photodynamic therapy based on organic small molecular fluorescent dyes

This review aims to provide a summary of the progress in organic small molecular fluorescent dyes for photodynamic therapy in recent years and it is classified according to the structures of dyes including cyanines, phthalocyanine, BODIPYs and other agents.     

Syntheses and structures of magnesium pyridine thiolates--model compounds for magnesium binding in photosystem I

Novel magnesium pyridine-2-thiolates were prepared by using alkane elimination chemistry. The resulting complexes display a metal coordination environment composed of sulfur/nitrogen bonding from the intramolecularly stabilized mercaptopyridine ligand, in addition to coordination by the oxygen centers from two THF donors. The compounds are well-suited model compounds for the magnesium centers in Photosystem I, in which magnesium, situated in the central chlorophyll ligand, is bound to sulfur from a nearby methionine residue. All compounds were characterized by (1)H, (13)C NMR, and IR spectroscopy, in addition to Xray crystallography.     

Synthesis and structures of monomeric magnesium, calcium, strontium, and barium amides involving the N,N-(2,4,6-trimethylphenyl)(trimethylsilyl)amido ligand

An extended family of aryl-substituted alkaline earth metal silylamides M{N(2,4,6-Me3C6H2)(SiMe3)}donor(n) was prepared using alkane elimination (Mg), salt elimination (Ca, Sr, Ba), and direct metalation (Sr, Ba). Three different donors, THF, TMEDA (TMEDA = N,N,N',N'-tetramethylethylenediamine), and PMDTA (PMDTA = N,N,N',N',N'-pentamethyldiethylenetriamine) were employed to study their influence on the coordination chemistry of the target compounds, producing monomeric species with the composition M{N(2,4,6-Me3C6H2)(SiMe3)}2(THF)2 (M = Mg, Ca, Sr, Ba), M{N(2,4,6-Me3C6H2)(SiMe3)}2TMEDA (M = Ca, Ba), and M{N(2,4,6-Me3C6H2)(SiMe3)}2PMDTA (M = Sr, Ba). For the heavier metal analogues, varying degrees of agostic interactions are completing the coordination sphere of the metals. Compounds were characterized using IR and NMR spectroscopy in addition to X-ray crystallography.     

meso-substituted aromatic 34pi core-modified octaphyrins: syntheses,characterization and anion binding properties

Modified octaphyrins with 34pi electrons have been synthesized and characterized following a simple synthetic methodology. An acid-catalyzed alpha,alpha coupling of tetrapyrranes containing furan, thiophene and selenophene rings resulted in the formation of the respective octaphyrins in relatively good yield. Solution studies by (1)H NMR and 2D NMR methods and single crystal Xray structural characterization reveal an almost flat structure with two heterocyclic rings inverted. Specifically, in 14 two selenophene rings (one on each biselenophene unit) are inverted while in 15 two furan rings (one on each bifuran unit) are inverted when the meso substituent are mesityl groups. On changing the mesityl substituent to m-xylyl group as in 19, the location of ring inversion shifts to pyrrole rings (one on each bipyrrole unit) indicating the dependence of structure on the meso substituents. UV/Vis studies, both in freebase and protonated forms reveal typical porphyrinic character and the aromatic nature of the octaphyrins. The Deltadelta values evaluated by (1)H NMR spectroscopy also support their aromatic nature. The protonated forms of octaphyrins bind TFA anion in a 1:2 ratio. The TFA anions are located one above and below the plane of the octaphyrin macrocycle and they are held by weak electrostatic NH-O interactions similar to that observed for protonated rubyrins. However, in the present case, there is an additional non-electrostatic CH-O interaction involving beta-CH of the inverted heterocyclic ring and the carbonyl oxygen of the TFA. Furthermore, inter molecular interactions between the Cbond;H of the meso-mesityl group and the fluorine of CF(3) group of bound TFA leads to the formation of one-dimensional supramolecular arrays with interplanar distance of 13 A between two octaphyrins.     

Highly efficient electrocatalytic hydrogen evolution promoted by O–Mo–C interfaces of ultrafine β-Mo2C nanostructures

Optimizing interfacial contacts and thus electron transfer phenomena in heterogeneous electrocatalysts is an effective approach for enhancing electrocatalytic performance. Herein, we successfully synthesized ultrafine β-Mo₂C nanoparticles confined within hollow capsules of nitrogen-doped porous carbon (β-Mo₂C@NPCC) and found that the surface layer of molybdenum atoms was further oxidized to a single Mo–O surface layer, thus producing intimate O–Mo–C interfaces. An arsenal of complementary technologies, including XPS, atomic-resolution HAADF-STEM, and XAS analysis clearly reveals the existence of O–Mo–C interfaces for these surface-engineered ultrafine nanostructures. The β-Mo₂C@NPCC electrocatalyst exhibited excellent electrocatalytic activity for the hydrogen evolution reaction (HER) in water. Theoretical studies indicate that the highly accessible ultrathin O–Mo–C interfaces serving as the active sites are crucial to the HER performance and underpinned the outstanding electrocatalytic performance of β-Mo₂C@NPCC. This proof-of-concept study opens a new avenue for the fabrication of highly efficient catalysts for HER and other applications, whilst further demonstrating the importance of exposed interfaces and interfacial contacts in efficient electrocatalysis.

Ultrafine β-Mo₂C nanostructures encapsulated in N-doped carbon capsules featuring O–Mo–C interfaces as the active sites for HER have been unveiled.     

Linker engineering in metal–organic frameworks for dark photocatalysis

Dark reactions featuring continuous activity under light off conditions play a critical role in natural photosynthesis. However, most artificial photocatalysts are inactive upon the removal of the light source, and the artificial photocatalysts with dark photocatalysis abilities have been rarely explored. Herein, we report a Ti-based metal–organic framework (MOF), MIL-125, exhibiting the capability of dark photocatalytic hydrogen production. Remarkably, the introduction of different functional groups onto the linkers enables distinctly different activities of the resulting MOFs (MIL-125-X, X = NH₂, NO₂, Br). Dynamic and thermodynamic investigations indicate that the production and lifetime of the Ti³⁺ intermediate are the key factors, due to the electron-donating/-withdrawing effect of the functional groups. As far as we know, this is the first report on dark photocatalysis over MOFs, providing new insights into the storage of irradiation energy and demonstrating their great potential in dark photocatalysis due to the great MOF diversity.

A Ti-based MOF with long-lived Ti³⁺ can achieve dark photocatalysis. The different groups on the organic linker modulate electron storage ability and the lifetime of Ti³⁺, significantly regulating dark photocatalytic activity in H₂ production.