Molar extinction coefficients of some carbohydrates in aqueous solutions

Molar extinction coefficients of some carbohydrates viz. l-arabinose (C₅H₁₀O₅), d-glucose (C₆H₁₂O₆), d-mannose (C₆H₁₂O₆), d-galactose (C₆H₁₂O₆), d(-) fructose (C₆H₁₂O₆) and maltose (C₁₂H₂₄O₁₂) in aqueous solutions have been determined at 81, 356, 511, 662, 1173 and 1332 keV by gamma ray transmission method in a narrow beam good geometry set-up. These coefficients have been found to depend upon the photon energy following a 4-parameter polynomial. These extinction coefficients for different sugars having the same molecular formula have same values varying within experimental uncertainty. Within concentration ranges studied, Beer-Lambert law is obeyed very well.     

Dual-opposite-injection CZE: theoretical aspects and application to organic and pharmaceutical compounds

Several important figures of merit (migration time, efficiency, resolution, resolution per unit time, and electrophoretic selectivity) are quantitatively compared for the first time for conventional CZE and dual-opposite-injection CZE (DOI-CZE). Aspects of DOI-CZE relevant to the separation of organic and pharmaceutical ions (MW>120 Da) are also discussed. Two new approaches to resolve the codetection of anions and cations, hydrodynamic flow-modified DOI-CZE and polarity reversal in combination with asymmetric detector window positioning, are compared with the method of preliminary transport, a variable procedure within sequential sample introduction, using a six-component sample of organic and pharmaceutical compounds. The advantages of DOI-CZE for the simultaneous analysis of organic/pharmaceutical anions and cations are illustrated in a direct comparison of conventional CZE and DOI-CZE for the separation of a ten-component mixture of pharmaceutical ions (five ionized acids and five ionized bases).     

Transient elastohydrodynamic drag on a particle moving near a deformable wall

We examine the prescribed time-dependent motion of a rigid particle(a sphere or a cylinder) moving in a viscous fluid close toa deformable wall. The fluid motion is described by a nonlinearevolution equation, derived using lubrication theory, whichis solved using numerical and asymptotic methods; a local linearpressure–displacement model describes the wall. When theparticle moves from rest towards the wall, fluid trapping beneaththe particle leads to an overshoot in the normal force on theparticle; a similarity solution is used to describe trappingat early times and a multiregion asymptotic structure describesfluid draining at late times. When the particle is pulled fromrest away from the wall, a peeling process (described by a quasisteadytravelling wave) determines the rate at which fluid can enterthe growing gap between the particle and the wall, leading toa transient adhesive normal force. When a cylinder moves fromrest transversely over the wall, transient peeling motion isagain observed (especially when the wall is initially indented),giving rise to an overshoot in the transverse drag. Simulationsfor a translating sphere show highly nonlinear wall deformationscharacterized by a localized crescent-shaped ridge. Despitegenerating sharp transient deformations, we found no numericalevidence of finite-time choking events.     

Dichlorocarbene Addition to

In contrast to the terminal phosphinidene complex PhPW(CO)(5) (2), which adds to [5]metacyclophane (1) in a 1,4-fashion, dichlorocarbene preferentially adds in a 1,2-fashion to the formal "anti-Bredt" type double bond of the aromatic ring of 1 to afford the norcaradiene 11b, which immediately rearranges to the bridged cycloheptatriene 12b and further by a [1,5] sigmatropic chlorine migration to the isomeric 13b as the first observable product. More slowly, the latter isomerizes via a dissociative mechanism to give 15b. A computational study supports the notion that the [1,5] chlorine migration in the rearrangement 12b --> 13b, for which an activation barrier of 70.2 kJ mol(-)(1) was calculated, is essentially concerted with minor charge separation. In contrast, the analogous [1,5] chlorine migration in the flat model compound 7,7-dichlorocycloheptatriene (12a) displays features of a dissociative pathway.     

Plate number requirements for establishing method suitability

Establishing the suitability of an analytical system has become a routine requirement in the testing of modern pharmaceuticals. Acceptable parameters that illustrate the system is performing as intended and in an equivalent manner to the original validation are often set at the time of method validation and transferred with the method to the production laboratory. For chromatographic methods, these parameters include--but are not limited to--resolution, tailing, and plate number specifications. Transferring methods is often a seamless transition from research to quality control. However, far too often the quality group receives arguably "overzealous" and strict requirements for the method. More specifically, chromatographic methods get issued with plate number specifications that far exceed the minimum number required to achieve sufficient resolution of the analytes. Presented here is a discussion of the setting of realistic plate number specifications that still maintain the minimum resolution of the chromatographic critical pair.     

Metabolism of selenite in human lung cancer cells: X-ray absorption and fluorescence studies

Selenite is an inorganic form of selenium that has a cytotoxic effect against several human cancer cell lines: one or more selenite metabolites are considered to be responsible for its toxicity. X-ray absorption spectroscopy was used to monitor Se speciation in A549 human lung cancer cells incubated with selenite over 72 h. As anticipated, selenodiglutathione and elemental Se both comprised a large proportion of Se in the cells between 4 and 72 h after treatment, which is in accordance with the reductive metabolism of selenite in the presence of glutathione and glutathione reductase/NADPH system. Selenocystine was also present in the cells but was only detected as a significant component between 24 and 48 h concomitant with a decrease in the proportion of selenocysteine and the viability of the cells. The change in speciation from the selenol, selenocysteine, to the diselenide, selenocystine, is indicative of a change in the redox status of the cells to a more oxidizing environment, likely brought about by metabolites of selenite. X-ray fluorescence microscopy of single cells treated with selenite for 24 h revealed a punctate distribution of Se in the cytoplasm. The accumulation of Se was associated with a greater than 2-fold increase in Cu, which was colocalized with Se. Selenium K-edge extended X-ray absorption fine structure (EXAFS) spectroscopy revealed Se-Se and Se-S bonding, but not Se-Cu bonding, despite the spatial association of Se and Cu. Microprobe X-ray absorption near-edge structure spectroscopy (μ-XANES) showed that the highly localized Se species was mostly elemental Se.     

Thermodynamics of Chromium(VI) Anionic Species Sorption onto Surfactant-Modified Montmorillonite Clay

Batch sorption experiments performed on Cr(VI) species sorption showed a significantly enhanced removal of inorganic hexavalent chromium anionic species from aqueous solution by montmorillonite clays modified with quaternary amine, hexadecyltrimethylammonium (HDTMA) bromide. Unmodified clay had no affinity for chromium(VI) species. The sorption of Cr(VI) species has been carried out as a function of pH, contact time, adsorbate concentration (4.14x10(-5) to 8.62x10(-3) M), and temperature (5-45 degrees C). The surfactant-modified clay surface was stable when exposed to extremes in pH. The optimum pH for maximum sorption of Cr(VI) species was found to be at pH 1 and was constant between pH 2 and pH 6. The sorption data obtained was well described by DKR and Langmuir sorption isotherms. Sorption energy (E) for (i) surfactant sorption by montmorillonite clay and (ii) sorption of chromium(VI) species by surfactant modified clay have been computed from the DKR equation. Sorption energy evaluated for the sorption of both surfactant and Cr(VI) species showed that an ion-exchange mechanism was operative. The mechanism of retention appears to be replacement of counterion of the surfactant by Cr(VI) anionic species. Adsorbent capacity for the sorption of Cr(VI) species has been evaluated from the Langmuir sorption isotherm data. Thermodynamic parameters (Delta H degrees, Delta S degrees and Delta G degrees ) for surfactant sorption on montmorillonite clay and Cr(VI) sorption by modified clay have been evaluated. The specific rate constant for sorption of Cr(VI) species on modified montmorillonite was rapid during the first 10 min and equilibrium was found to be attained within 30 min. The sorption of Cr(VI) species onto modified montmorillonite clay followed first-order rate kinetics. Copyright 2000 Academic Press.