Development of Non-Halogen Flame Retardant Optical Fiber and Optical Fiber Cord

A non-halogen highly flame-retardant 0.9mm optical fiber and 2.0mm simplex optical cord, which are harmonized with the ecosystem, have been developed. The characteristics of them are presented in this paper.     

Evaluation of fine structure of tubular zeolite NaA membrane by FTIR-ATR and FIB-TEM.

A zeolite NaA (LTA) membrane supported by an alumina porous support tube for pervaporation (PV) dehydration of ethanol was characterized by transmission electron microscopy (TEM) using a focused ion beam (FIB) thin-layer specimen preparation technique and by Fourier transform infrared attenuated total reflectance method (FTIR-ATR) using a diamond prism as the waveguide. FIB-TEM clearly presented cross-section images up to about 15 microm depth from the membrane surface. FTIR-ATR monitored the Si-O asymmetric stretching vibration spectrum. The Si-O spectrum was compared with the TEM image and their relationships were discussed. By combining the two methods, we could study the thickness of surface LTA crystals, the grain boundary, the LTA/alumina interface structure and the crystallinity and density of materials inside of the alumina porous support. Consequently, fine structure changes of the LTA membrane corresponding to the hydrothermal synthesis condition could be sensitively detected.     

Novel ring transformation of thiazolidine to oxazolidine: acyl halide-promoted intramolecular rearrangement of 4(R)-hydroxymethyl-3-methyl-1,3-thiazolidine

An interesting transformation occurs during acylation of 4(R)-hydroxymethyl-3-methyl-1,3-thiazolidine when 4(R)-acylthiomethyl-3-methyl-1,3-oxazolidines are yielded: the reaction competing with O-acylation is controlled by the bulkiness of the acyl group.     

Formation of azatitanacyclopentanes from ene-imines and a Ti(O-i-Pr)4/2i-PrMgX reagent and their synthetic reactions

ω-Vinylimines reacted with a Ti(O-i-Pr)₄/2i-PrMgX reagent to generate the corresponding azatitanacyclopentanes in quantitative yield, which in turn reacted with H₂O, I₂ and O₂ to give 2-methyl-, 2-iodomethyl-, 2-hydroxymethyl-1-aminocyclic compounds, respectively. The azatitanacyclopentanes thus generated reacted with formaldehyde to afford the corresponding 2,3-annulated pyrrolidines in good yield.     

Determination of molecular weight distribution of nylon 12 by gel permeation chromatography

Molecular weight distribution of Nylon 12 was determined with hexafluoroisopropanol/toluene mixture as eluent by gel permeation chromatography. Calibration curve for Nylon 12 was easily obtained from that of polystyrene because the method of universal calibration was applicable among these polymers. The molecular weight distributions of Nylon 12 were always broader than expected by the theory of polymerization, i.e., most probable distribution. This result was not caused by broadening effect in gel permeation chromatography, but by polymerization itself.     

New formation of a 1,3-dipole in the reaction of adamantanone azine with triazolinediones: In connection with reactivity toward singlet oxygen

Tricyclo[3.3.1.1]decanone azine ( adamantanone azine ) reacts with 4-substituted 1,2,4-triazoline-3,5-diones under elimination of diazo adamantane to give a 1,3-dipole ( “azomethinimine” ), which on treatment with dipolahophiles affords the [ 2 + 3] -cycloadducts. The reaction is compared with singlet oxygen oxidation.     

Hydrothermal Synthesis of Mo-Based Oxide Catalysts and Selective Oxidation of Alkanes

Mo-V-M(=Al, Ga, Bi, Sb and Te)–O mixed oxide catalysts were synthesized hydrothermally for the first time, characterized structurally, and tested for ethane and propane oxidation after activation by various ways. These catalysts were black solids of rod-shaped (fiber like) crystals, which had a layer structure in the direction of fiber axis and a high dimensional arrangement of metal octahedra in the cross-section plane. These fresh crystalline materials became active for catalytic oxidation of alkanes after heat-treatment at 600 °C and subsequent grinding in order to increase exposed plane of the cross-section. The resulting catalysts were very active for an oxidative dehydrogenation of ethane with 80% of the ethylene selectivity in the reaction temperature range of 300 to 400 °C and also showed about 50% selectivity to acrylic acid in the propane oxidation. Multi-functional character which derived from the high dimensional structure of the catalysts and mechanism of the selective alkane oxidation were discussed.     

In Situ Processing of Nano Crystalline Oxide Particles/Polymer Hybrid

Nano sized crystalline particles/polymer hybrids were synthesized form designed metal-organic precursors. The newly developed method is composed of the synthesis of organic matrix by polymerization and the in situ nucleation and growth of crystalline oxide particles in the organic matrix below 100°C. The design of metal-organic precursor modified with polymerizable ligand and the selection of reaction conditions does influence the size and crystallinity of ceramic particles in organic matrix. The nano-sized magnetic particle/polymer hybrid exhibits the interesting feature of superparamagnetism and quantum size effect. The crystalline particles of BaTiO₃/, PbTiO₃/, and KNbO₃/polymer hybrids behave to be dielectric and show the typical electro-rheological behavior.