Thin layer chromatography of 57 metal ions on an inorganic ion-exchanger in mixed solvent systems

Summary Thin layers of stannic arsenate have been used to study the chromatographic behaviour of 57 metal ions in different mixed solvents. Au³⁺, Hg²⁺, UO ₂ ²⁺ , Be²⁺ and Al³⁺ and others can be easily separated from numerous metal ions. Fast quaternary, ternary and binary separations have been also achieved. Important separations are discussed. The effect of pH, duration of heating of ionexchanger plates and layer thickness on the R_f values has been studied and discussed. It is shown that Lederer's equation is also obeyed by thin layers of stannic arsenate, if instead of concentration of Na⁺ ion its activity is taken into consideration.     

Polyvinylimidazole/sol–gel composite as a novel solid‐phase microextraction coating for the determination of halogenated benzenes from aqueous solutions

A polyvinylimidazole/sol–gel composite is proposed as a novel solid‐phase microextraction fiber to extract five halobenzenes from the headspace of aqueous solutions in combination with gas chromatography with mass spectrometry. The prepared fiber was characterized by scanning electron microscopy and Fourier transform infrared spectroscopy. The obtained results showed that porous polyvinylimidazole/sol–gel composite was chemically deposited on fused silica fiber. The effect of important extraction parameters including extraction temperature, extraction time, and salt content were investigated. The optimum conditions were as follows: extraction temperature 25°C, extraction time 20 min, and salt concentration 30 w/v%. Detection limits and relative standard deviations of the developed method for halogenated benzenes were below 0.1 pg/mL and 15%, respectively. Repeatability of the proposed method, explained by relative standard deviation, varied between 5.48 and 9.15% (n = 5). The limits of detection (S/N = 3) ranged between 0.01 and 0.10 ng/L using gas chromatography with mass spectrometry with selected ion monitoring mode. For real sample analysis, three types of water samples with different matrices (ground, surface, and tap water) were studied. The optimized procedure was applied to extraction and method validation of halogenated benzenes in spiked water samples.     

Adsorption Studies of Radionuclides and Toxic Metal Ions on a Modified Mesoporous Lanthanum(III) Silicate

A new adsorbent, modified mesoporous lanthanum(III) silicate, has been prepared with various molar ratios of Si/La (10, 20, 40, 80) and cethyltrimethylammonium bromide (CTAB) as structure directing agent. XRD, nitrogen sorption, SEM, IR, thermogravimetry and sorption of radionuclides and toxic metal ions have been studied. The results show that adsorption amount of some element such as Pb(II) and Th(IV) has been increased significantly by incorporation of lanthanum ions in the framework of adsorbent. Separation of Co(II)‐Th(IV), Co(II)‐U(VI) and Mo(VI)‐U(VI) has been developed on columns of this adsorbent.     

Solid-phase extraction and spectrophotometric determination of mercury with 6-mercaptopurine in environmental samples

A highly selective, sensitive and rapid method for the determination of trace amounts of inorganic mercury based on the reaction of Hg (II) with 6-mercaptopurine and the solid phase extraction of the complex on C18 membrane disks was developed. The 6-mercaptopurine selectively reacts with Hg (II) to form a complex in the pH range of 5-8. This complex was preconcentrated by solid phase extraction with C18 disks. An enrichment factor of 100 was achieved. The molar absorptivity of the complex is 0.26 x 10(-6) L. mol(-1) cm(-1) measured at 315 nm. The Beer's law is obeyed in the concentration range of 0.002-0.048 microg mL(-1). The relative standard deviation for eleven-replicated measurement of 0.04 microg mL(-1) is 1.5 %. The detection limit is 0.001 microg mL(-1) in the water samples. The advantage of the method is that the determination of Hg (II) is free from interference of almost all the cations and anions found in environment and wastewater samples. The determination of Hg (II) in water samples of different origins and marine sediment were carried out by the present method and cold vapor atomic absorption spectrometry (CVAAS). Also the method's accuracy was investigated by using SRM 2709. The obtained results by the present procedure were in good agreement with those of the CVAAS and certified value, so that the applicability of the proposed method was confirmed for the real samples.     

A novel strategy to increase performance of solid‐phase microextraction fibers: Electrodeposition of sol‐gel films on highly porous substrate

In the present work, the effect of substrate porosity for preparation of solid‐phase microextraction (SPME) fibers was investigated. The fibers were prepared by electrodeposition of sol‐gel coatings using negative potentials on porous Cu wire and compared with previous reported technique for preparation of SPME fibers using positive potentials on smooth gold wire. Porous substrate was prepared by electrodeposition of a thin layer of Cu on a Cu wire. The extraction capability of prepared fibers was evaluated through extraction of some aromatic hydrocarbons from the headspace of aqueous samples. The effect of substrate porosity and some operating parameters on extraction efficiency was optimized. The results showed that extraction efficiency of SPME fibers highly depends on porosity of the substrate. The LOD ranged from 0.005 to 0.010 ng/mL and repeatability at the 1 ng/mL was below 12%. Electrodeposited films were characterized for their surface morphology and thermal stability using SEM and thermogravimetric analysis, respectively. SEM analysis revealed formation of porous substrate and subsequently porous coating on the wire surface and thermogravimetric analysis showed high thermal stability of the prepared fiber.     

Synthesis of Mesoporous Lanthanum Phosphate and Its Use as a Novel Sorbent

Mesoporous lanthanum phosphate was synthesized by supramolecular self-assembly of cetyltrimethylammo-nium bromide and lanthanum nitrate following digestion in phosphoric acid.TGA-DTA,XRD and SEM were em-ployed to study the uncalcined and calcined materials.Sorption behavior of Cr(Ⅲ),Mn(Ⅱ),Fe(Ⅲ),Co(Ⅱ),Ni(Ⅱ),Cu(Ⅱ),Zn(Ⅱ),Cd(Ⅱ),Ba(Ⅱ),Hg(Ⅱ)and Pb(Ⅱ)cations was studied on such materials in water,3 mol·L~(-1)ammonia,0.01 mol.L~(-1)potassium ferrocyanide and 0.01 mol·L~(-1)potassium ferricyanide solutions.     

Quantitative Ion-Exchange TLC of p-Hydroxybenzoic Acid in the Presence of Preservatives

JPC – Journal of Planar Chromatography – Modern TLC - Rapid separation of p-hydroxybenzoic acid from methyl p-hydroxy-benzoate, ethyl p-hydroxybenzoate, propyl p-hydroxybenzoate,...     

Solid-Phase Extraction of Metoprolol onto(Methacrylic acid-ethylene glycol dimethacrylate)-based Molecularly Imprinted Polymer and Its Spectrophotometric Determination

A new adsorbent for molecularly imprinted solid phase extraction (MISPE) of metoprolol was synthesized using methacrylic acid (MAA) as functional monomer and ethylene glycol dimethacrylate (EGDMA) as cross‐linking agent causing a non‐covalent, bulk, thermal radical‐polymerization. Control polymer (non‐imprinted polymer) was prepared under well defined conditions without the use of metoprolol. The synthesized polymers were characterized by IR spectroscopy, X‐ray diffraction and thermal analysis techniques. This polymer was used for the rapid extraction and preconcentration of metoprolol from real samples prior to spectrophotometric determination. Extraction efficiency and the influence of flow rates of sample and stripping solutions, pH, type of eluent for elution of metoprolol from polymer, break through volume and limit of detection were studied. The detection limit of the proposed method is 0.4 ng·mL^?1. The method was applied successfully to the recovery and determination of metoprolol in tablets, human urine and plasma samples.     

Influence of the Synthesis pH on Sorption Behavior of Mesoporous MCM-41 for Toxic Metal Ions

Two samples of mesoporous MCM‐41 have been prepared in acidic and basic conditions with cetyltrimethylammonium bromide (CTAB) as template and characterized by powder X‐ray diffraction and N₂ adsorption‐desorption measurement to confirm the ordered mesoporous structure. Sorption of 21 toxic metal ions on these sorbents has been studied and discussed. The results show that distribution coefficient of Ba(II), Fe(III), Th(IV) on the synthesized MCM‐41 in basic condition and Cu(II), Pb(II), Zr(IV) on the synthesized MCM‐41 in acidic condition has been enhanced.     

Determination of aluminum levels in serum and red blood cells from long-term haemodialysis patients using instrumental neutron activation analysis

Aluminum levels of serum and red blood cell (RBC) were determined by instrumental neutron activation analysis (INAA) in 15 patients undergoing long-term haemodialysis. In the sample, aluminum was bombarded with thermal neutrons due to ²⁷Al(n,γ)²⁸Al and was determined by measuring 1779 keV gamma-ray of ²⁸Al (T _1/2 = 2.24 min) with a HPGe detector. Phosphorus, causing an important interference by the fast neutron reaction, ³¹P(n,α)²⁸Al, was determined by the photometric method to correct the net-area under the ²⁸Al gamma-peak. The one-sample Kolmogorov-Smirnov test was used to control the normality distribution of the aluminum levels in serum and RBC. The results obtained were found to be in agreement with the serum aluminum determination performed by electrothermal atomic absorption spectrophotometry. The statistical results show a correlation between the aluminum levels of serum and RBC. This revised version was published online in July 2006 with corrections to the Cover Date.