STM/AFM studies of the evolution of morphology of electroplated Ni/W alloys

The surface morphology evolution of Ni/W alloys was studied, as a function of the alloy composition. Using the modified plating baths developed in our laboratory recently, electroplated Ni/W alloys with different W content, in the range of 7–67 atom percent (a/o), can be obtained. This was found to lead to different structures, ranging from polycrystalline fcc-Ni type structure to amorphous, followed by orthorhombic with increasing W content in the alloy. Powder XRD was studied to determine the crystal structures. Ex situ STM, AFM and SEM were used to study in detail the surface morphologies of the different alloys, and their evolution with increasing W content.

The important findings are that a mixture of two crystalline forms can give rise to an amorphous structure. Hillocks that are usually a characteristic of epitaxial growth can also exist in the amorphous alloys. Oriented scratches caused by stress can also be formed.

Up to 20 a/o of W is deposited in the alloys in crystalline form, with the fcc-Ni type structure. Between 20 and about 40 a/o an amorphous structure is observed, and above that an orthorhombic crystal structure is seen, which is characteristic of the NiW binary alloy. Careful choice of the composition of the plating bath allowed us to deposit an alloy containing 67 a/o W, which corresponds to the composition NiW₂.     

Stereochemistry of new nitrogen containing heterocyclic aldehyde. VII. Potentiometric, conductometric and thermodynamic studies of novel quinoline azodyes and their metal complexes with some transition metals

A novel series of quinoline azodyes (5-(4'-derivatives phenyldiazo)-8-hydroxy-7-quinolinecarboxaldehyde)) (HL1-HL5) has been prepared and characterized by elemental analyses, 1H-NMR and IR spectra. The IR spectral data indicate that the compounds can exist in two resonance structures. Proton-ligand dissociation constants of quinoline azodyes and their subsituted derivatives, and metal-ligand stability constants of their complexes with bivalent (Mn2+, Co2+, Ni2+, Cu2+) metal ions have been determined potentiometrically in 0.1 m KCl and 40% (v/v) dimethylformamide (DMF)-water mixture. The influence of substituents on the dissociation and stability constants was examined on the basis of the electron repelling property of the substituent. The order of the stability constants of the formed complexes was found to be Mn2+ < Co2+ < Ni2+ < Cu2+. The effect of temperature was studied and the corresponding thermodynamic parameters (deltaG, deltaH, deltaS) were derived and discussed. The stoichiometries of these complexes were determined conductometrically and indicated the formation of 1:1 and 1:2 (metal:ligand) complexes was indicated.     

The effect of implementation of the ISO 9000 on customer complaints; a 5-year follow-up study in a regional laboratory.

Although the importance of quality management in the medical laboratory has been emphasized, we are unaware of any interventional studies demonstrating benefits of implementation of recommendations of the International Standards Organization (ISO). In the following 5-year follow-up study, we implemented quality management as stipulated by the ISO, received a certificate of approval, and determined how the program affected customer complaints. From 1997 to 2001 there was only a slight decrease in the number of customer complaints, but a significant continuing downward trend in the proportion of justified complaints (chi-squared test, p<0.001). In fact in 2001 the proportion of justified complaints had decreased by nearly 80% (relative risk, 0.22; 95% confidence interval, 0.09–0.52)), to only 10.9% of the total complaints. We conclude that the use of the ISO 9000 along with good laboratory practice resulted in a significant decrease in the proportion of justified complaints.     

Sublimation and Diffusion Kinetics of 2,4,6-Trinitrotoluene (TNT) Single Crystals by Atomic Force Microscopy (AFM)

In this article, we report the in-situ nanoscale experimental measurement of sublimation rates, activation energy of sublimation, and diffusion coefficients of 2,4,6-trinitrotoluene (TNT) single crystals in air using atomic force microscopy (AFM). The crystals were prepared by slow evaporation at 5 °C using acetone-dissolved TNT. The mass loss was calculated by monitoring the shrinkage of the surface area of layered islands formed on the surface of the TNT crystals due to sublimation upon isothermal heating at temperatures below the melting point. The results suggest the sublimation process occurs via two-dimensional detachment of TNT molecules from the non-prominent facets on the crystal surface which imitates the nucleation and crystal growth process. Sublimation rates are one order of magnitude smaller than previously reported values. However, the calculated activation energy (112.15 ± 3.2 kJ/mol) and temperature-dependent sublimation rates agree well with the reported values for TNT thin films and microcrystals determined by UV-vis absorbance spectroscopy and quartz crystal microscopy (QCM) (90–141 kJ/mol). The average diffusion coefficient is (4.35 × 10^–6 m²/s) which is within the range of the reported theoretical values with an average of 5.59 × 10^–6 m²/s, and about 25% less than that determined using thermogravimetric analysis for powder TNT.     

Elaboration,Characterization and Thermal Decomposition Kinetics of New Nanoenergetic Composite Based on Hydrazine 3-Nitro-1,2,4-triazol-5-one and Nanostructured Cellulose Nitrate

This research aims to develop new high-energy dense ordinary- and nano-energetic composites based on hydrazine 3-nitro-1,2,4-triazol-5-one (HNTO) and nitrated cellulose and nanostructured nitrocellulose (NC and NMCC). The elaborated energetic formulations (HNTO/NC and HNTO/NMCC) were fully characterized in terms of their chemical compatibility, morphology, thermal stability, and energetic performance. The experimental findings implied that the designed HNTO/NC and HNTO/NMCC formulations have good compatibilities with attractive characteristics such as density greater than 1.780 g/cm³ and impact sensitivity around 6 J. Furthermore, theoretical performance calculations (EXPLO5 V6.04) displayed that the optimal composition of the as-prepared energetic composites yielded excellent specific impulses and detonation velocities, which increased from 205.7 s and 7908 m/s for HNTO/NC to 209.6 s and 8064 m/s for HNTO/NMCC. Moreover, deep insight on the multi-step kinetic behaviors of the as-prepared formulations was provided based on the measured DSC data combined with isoconversional kinetic methods. It is revealed that both energetic composites undergo three consecutive exothermic events with satisfactory activation energies in the range of 139–166 kJ/mol for HNTO/NC and 119–134 kJ/mol for HNTO/NMCC. Overall, this research displayed that the new developed nanoenergetic composite based on nitrated cellulose nanostructure could serve as a promising candidate for practical applications in solid rocket propellants and composite explosives.     

Effects of Frankincense Compounds on Infection,Inflammation, and Oral Health

Boswellia trees, found throughout the Middle East and parts of Africa and Asia, are the source of frankincense oil. Since antiquity, frankincense has been traded as a precious commodity, but it has also been used for the treatment of chronic disease, inflammation, oral health, and microbial infection. More recently, the bioactive components of Boswellia trees have been identified and characterized for their effects on cancer, microbial infection (especially infection by oral pathogens), and inflammation. Most studies have focused on cell lines, but more recent research has also investigated effects in animal models of disease. As natural products are considered to be safer than synthetic drugs, there is growing interest in further developing the use of substances such as frankincense oil for therapeutic treatment.     

Effect of monomer and hydrocarbon content and polarity of the medium on the preparation of nonspherical particles via seeded dispersion polymerization in the presence of saturated hydrocarbon droplets

In this work, the preparation of micron-sized polymer particles with nonspherical shapes via seeded dispersion polymerization of 2-ethylhexyl methacrylate (EHMA) with polystyrene (PS) seed particles in the presence of decane droplets and evaporation of decane after the polymerization under various polymerization conditions was discussed. The effect of monomer and decane content and polarity of the medium on the shape of the obtained particles was investigated. The experimental results showed that decreasing the amount of monomer and hydrocarbon volume of PEHMA/hydrocarbon domains, the particles decreased but they grew symmetrically, resulting in symmetric shapes. Furthermore, it was suggested that because of changing the solubility of the oligoradicals and hydrocarbon in the medium, the shape of the particles changed with changing the polarity of the medium. With decreasing the polarity of the medium, solubility of the oligoradicals in the medium increases and bigger polymer domains form on the surface of PS particles which can absorb higher amounts of decane. All of these can contribute to an increase in volume reduction after extraction of PEHMA/decane, resulting in various particle shapes. Further decreasing in polarity of the medium leads to an increase in the solubility of decane in the medium and decreasing the absorbed amount of decane by PS particles and PEHMA domains, resulting in lower volume reduction after evaporation of decane.     

New eco-friendly animal bone meal catalysts for preparation of chalcones and aza-michael adducts

ABSTRACT: Two efficient reactions were successfully carried out using Animal Bone Meal (ABM) and potassium fluoride or sodium nitrate doped ABMs as new heterogeneous catalysts under very mild conditions. After preparation and characterization of the catalysts, we first report their use in a simple and convenient synthesis of various chalcones by Claisen-Schmidt condensation and then in an aza-Michael addition involving several synthesized chalcones with aromatic amines. All the reactions were carried out at room temperature in methanol; the chalcone synthesis was also achieved in water environment under microwave irradiation. Doping ABM enhances the rate and yield at each reaction. Catalytic activities are discussed and the ability to re-use the ABM is demonstrated. RESULTS: For Claisen-Schmidt the use of ABM alone, yields never exceeded 17%. In each entry, KF/ABM and NaNO3/ABM (79-97%) gave higher yields than using ABM alone under thermic condition. Also the reaction proceeded under microwave irradiation in good yields (72-94% for KF/ABM and 81-97% for NaNO3/ABM) and high purity. For aza-Michael addition the use of ABM doped with KF or NaNO3 increased the catalytic activity remarkably. The very high yields could be noted (84-95% for KF/ABM and 81-94% for NaNO3/ABM). CONCLUSION: The present method is an efficient and selective procedure for the synthesis of chalcones anaaza-Michael adducts. The ABM and doped ABMs are a new, inexpensive and attractive solid supports which can contribute to the development of catalytic processes and reduced environmental problems.     

Doped Nano‐Sized Copper(I) Oxide (Cu2O) on Melamine?Formaldehyde Resin: a Highly Efficient Heterogeneous Nano Catalyst for ‘Click’ Synthesis of Some Novel 1H‐1,2,3‐Triazole Derivatives Having Antibacterial Activity

A facile and simple protocol for the 1,3‐dipolar cycloaddition of organic azides with terminal alkynes catalyzed by doped nano‐sized Cu₂O on melamine? formaldehyde resin (nano‐Cu₂O? MFR) as a new and convenient heterogeneous catalyst is described. In this method, ‘click’ cycloaddition of various structurally diverse β‐azido alcohols and alkynes in the presence of nano‐Cu₂O? MFR in H₂O/THF 1 : 2 furnished the corresponding 1,4‐disubstituted 1H‐1,2,3‐triazole adducts 1a – 1o in good to excellent yields at room temperature (Scheme and Table 3). The nano‐Cu₂O? MFR was characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD), inductively coupled plasma (ICP) analysis, and FT‐IR. The nano‐Cu₂O? MFR could be easily recovered and recycled from the reaction mixture and reused for many consecutive trials without significant decrease in activity (Table 4). The in vitro antibacterial activities of all synthesized compounds were tested on several Gram‐positive and/or Gram‐negative bacteria (Table 5). The results demonstrate the promising antibacterial activity for some of the synthesized compounds.     

A comparative study of the thermal behaviour of phosphate washing sludge from Tunisia and Morocco

Journal of Thermal Analysis and Calorimetry - The aim of the present work is to characterize the phosphate sludge from two different countries: Morocco and Tunisia, and to study the difference...