PtII-Catalyzed Hydroxylation of Terminal Aliphatic C(sp3)−H Bonds with Molecular Oxygen

The practical application of Shilov-type Pt catalysis to the selective hydroxylation of terminal aliphatic C−H bonds remains a formidable challenge, due to difficulties in replacing Pt^IV with a more economically viable oxidant, particularly O₂. We report the potential of employing FeCl₂ as a suitable redox mediator to overcome the kinetic hurdles related to the direct use of O₂ in the Pt reoxidation. For the selective conversion of butyric acid to γ-hydroxybutyric acid (GHB), a significantly enhanced catalyst activity and stability (turnover numbers (TON)>30) were achieved under 20 bar O₂ in comparison to current state-of-the-art systems (TON<10). In this regard, essential reaction parameters affecting the overall activity were identified, along with specific additives to attain catalyst stability at longer reaction times. Notably, deactivation by reduction to Pt⁰ was prevented by the addition of monodentate pyridine derivatives, such as 2-fluoropyridine, but also by introducing varying partial pressures of N₂ in the gaseous atmosphere. Finally, stability tests revealed the involvement of Pt^II and FeCl₂ in catalyzing the non-selective overoxidation of GHB. Accordingly, in situ esterification with boric acid proved to be a suitable strategy to maintain enhanced selectivities at much higher conversions (TON>60). Altogether, a useful catalytic system for the selective hydroxylation of primary aliphatic C−H bonds with O₂ is presented.     

Combined supercritical-fluid chromatography/mass spectrometry in the analysis of diuron in plasma using on-line phase-system switching

On-line sample pretreatment by means of the phase-system switching approach is an interesting technique for the analysis of aqueous samples, e.g., plasma, by means of supercritical-fluid chromatography. In order to analyse plasma samples the following analytical procedure is used. The plasma sample is injected on to a short precolumn, which is washed with water and subsequently dried with nitrogen. Next, the solutes are desorbed with the supercritical mobile phase, analysed with packed-column supercritical-fluid chromatography and detected with either a UV detector or a mass spectrometer, equipped with a moving-belt interface. The herbicide diuron is selected as a test compound to study the feasibility of this approach. Using a selective detector the procedure is sufficiently sensitive to detect diuron in plasma, but not appropriate to detect the diuron metabolites in a post-mortem plasma sample. These have been identified with liquid chromatography/mass spectrometry. The detection limit of diuron in plasma using the procedure described is about 30 ng/mL.     

Annoyance caused by simultaneous impulse, road-traffic, and aircraft sounds: a quantitative model.

In this study, total annoyance caused by different simultaneous environmental sounds is investigated. In spite of a number of puzzling data in the literature, it is fairly well established that in combinations in which the annoyance of one source is considerably higher than that of another source, total annoyance is equal to the maximum annoyance of the separate sources. For combinations in which both sounds are about equally annoying, total annoyance seems to be higher than the maximum source-specific annoyance. The available data, however, are too rough to model total annoyance in these conditions. The present laboratory studies were therefore designed to explore further possible procedures to quantify total annoyance. Subjects rated the (total) annoyance caused by various combinations of impulse, road-traffic, and aircraft sounds. The results support a simple model which predicts the overall or total rating sound level L(t) for combinations of several types of sounds. Here, L(t) is numerically equal to the A-weighted equivalent sound level L(eq) of road-traffic sound with the same annoyance as caused by the combination of sounds. In the model, the sound exposure caused by the impulse and/or aircraft sounds is first expressed in the L(eq) of equally annoying road-traffic sound. With the help of source-specific dose-effect relationships, this is achieved by adding level-dependent penalties to the L(eq) of the respective sources. Weighted summation of the corrected L(eq)'s of the various sources then results in L(t). An optimal overall fit of the data from two separate experiments was obtained when the weighted summation of the corrected L(eq)'s was performed with the parameter k in k log(sigma 10(corrected L(eq) of source j)/k) set to 15. The standard deviation of the differences between the experimental results and the model predictions with k = 15 was equivalent to the small change in annoyance produced by a 1.5-dB shift in the L(eq) of road-traffic sound. Adoption of k = 15 implies that after correction, two equal L(eq)'s yield a total rating sound level which is 4.5 dB higher than each single-source corrected L(eq).     

Evidence for a nonradical pathway in the photoracemization of aryl sulfoxides

Photolysis of (R(S),S(C))-1-deuterio-2,2-dimethylpropyl p-tolyl sulfoxide provides mainly (S(S),S(C))-1-deuterio-2,2-dimethylpropyl p-tolyl sulfoxide at low conversion, though the other two stereoisomers are formed to smaller extents. Thus, the predominant process leading to sulfur inversion yields only sulfur inversion, without inversion of the adjacent CHD stereogenic center. This is taken as evidence for a mechanism for photochemical epimerization of sulfoxides that does not involve homolytic alpha-cleavage chemistry.     

Proton controlled intramolecular communication in dinuclear ruthenium(II) polypyridine complexes

The synthesis and characterization of two dinuclear ruthenium polypyridyl complexes based on the bridging ligands 5,5'-bis(pyridin-2' '-yl)-3,3'-bis(1H-1,2,4-triazole) and 5,5'-bis(pyrazin-2' '-yl)-3,3'-bis(1H-1,2,4-triazole) and of their mononuclear precursors are reported. The dinuclear compounds have been prepared by a Ni(0) catalyzed coupling of a mononuclear ruthenium(II) polypyridyl complex containing a brominated triazole moiety. Electrochemical and photophysical studies indicate that, in these dinuclear complexes, the protonation state of the bridge may be used to tune the intercomponent interaction between the two metal centers and that these species act as proton driven three-way molecular switches that can be read by electrochemical or luminescence techniques.     

SCF,MP2, and CEPA-1 calculations on the OH ‥ O hydrogen bonded complexes (H2O)2 and (H2O-H2CO)

Counterpoise corrected ab initio calculations are reported for (H₂O)₂ and H₂O-H₂CO. Geometry searches were done in the moment-optimized basis DZP' at the SCF, MP2, and CEPA-1 levels of theory, followed by more accurate single-point calculations in basis ESPB, which includes bondfunctions to saturate the dispersion energy. The final equilibrium binding energies obtained are ?4.7 ±0.3 kcal/mol for a near-linear (H₂O)₂ structure and ?4.6 ±0.3 kcal/mol for a strongly bent HOH ‥ OCH₂ structure. The energy difference between these systems is much smaller than in all previous ab initio work. Cyclic (C_2h) and bifurcated (C_2v) transition structures for (H₂O)₂ are located at 1.0 ±0.1 kcal/mol and 1.9 ±0.3 kcal/mol above the global minimum, respectively. A new partitioning scheme is presented that rigorously partitions the MP2 correlation interaction energy in intra and intermolecular (dispersion) contributions. These terms are large (up to 2 kcal/mol) but of opposite sign for most geometries studied and hence their overall effect upon the final structures is relatively small. The relative merits of the MP2 and CEPA-1 approaches are discussed are discussed and it is concluded that for economical reasons MP2 is to be preferred, especially for larger systems.     

Kinetic and spectroscopic study of 1O2 generation from H2O2 catalyzed by LDH-MoO4(2-) (LDH=layered double hydroxide)

Layered double hydroxides (LDHs), exchanged with molybdate, decompose H2O2 to form one molecule of singlet-state dioxygen (1O2) from two molecules of H2O2. The dependence of the kinetics of H2O2 decomposition on Mo and H2O2 concentrations and on temperature has been related to structural characteristics of the material (X-ray diffraction (XRD), scanning electron microscopy (SEM), IR spectroscopy, N2 adsorption, thermogravimetry) and to molybdate speciation as revealed by in-situ studies in the presence of peroxide (FT Raman, diffuse reflectance UV/visible spectroscopy). The H2O2 decomposition rate is linearly correlated with the amount of LDH-exchanged molybdate, except when a considerable fraction of the molybdate occupies less accessible interlayer positions. A maximum in the H2O2 decomposition rate as the H2O2 concentration is increased is due to the successive formation of mono-, di-, tri-, and tetraperoxomolybdates. This behavior was modeled successfully by using the equilibrium constants for formation of the Mo-peroxo complexes, and the rate constants for decay of the peroxomolybdates with 1O2 liberation. Time-resolved diffuse reflectance and Raman observations of the various MoO4(2-)-peroxide adducts are in line with the proposed kinetic scheme. Of all the Mo-peroxo species on the LDH, the triperoxomolybdate has the highest rate for decay to 1O2. Comparison with the kinetics of dissolved molybdate shows that the monomolecular decay of all peroxomolybdate species proceeds much faster at the LDH surface than in solution. Consequently, maximal rates per Mo atom are at least twice as high for the heterogeneous LDH catalyst as for the homogeneous systems.