Self-Assembly of C3 Symmetric Rigid Macrolactams into Very Polar and Porous Trigonal Crystals

Cyclohexane and cyclotri-β-alanyl have been used as scaffolds for the design of new C₃-symmetric rings incorporating conjugated alkenes and dienes. All three C₃-symmetric lactams share the same triangular shape and their crystal system is trigonal. They all belong to the R3 space group, R3m, R3 and R3c, for the increasingly large 12-, 18- and 24-membered rigid rings, respectively. All lactams stack on top of each other, through H-bonds and van der Waals noncovalent interactions, leading to endless supramolecular cylinders and tubes. The largest member of the family leads to tubes, the central pores of which is wide enough to let water in. A common feature of all the lactams is their very large dipole, of around 9 D, according to DFT calculations. Surprisingly, all the resulting cylinders and tubes pack side by side in the crystals, with all the dipoles pointing to the same direction. As a result, all three crystals are anisotropic and appear to be the first members of a new kind of highly polar crystals.     

PtII-Catalyzed Hydroxylation of Terminal Aliphatic C(sp3)−H Bonds with Molecular Oxygen

The practical application of Shilov-type Pt catalysis to the selective hydroxylation of terminal aliphatic C−H bonds remains a formidable challenge, due to difficulties in replacing Pt^IV with a more economically viable oxidant, particularly O₂. We report the potential of employing FeCl₂ as a suitable redox mediator to overcome the kinetic hurdles related to the direct use of O₂ in the Pt reoxidation. For the selective conversion of butyric acid to γ-hydroxybutyric acid (GHB), a significantly enhanced catalyst activity and stability (turnover numbers (TON)>30) were achieved under 20 bar O₂ in comparison to current state-of-the-art systems (TON<10). In this regard, essential reaction parameters affecting the overall activity were identified, along with specific additives to attain catalyst stability at longer reaction times. Notably, deactivation by reduction to Pt⁰ was prevented by the addition of monodentate pyridine derivatives, such as 2-fluoropyridine, but also by introducing varying partial pressures of N₂ in the gaseous atmosphere. Finally, stability tests revealed the involvement of Pt^II and FeCl₂ in catalyzing the non-selective overoxidation of GHB. Accordingly, in situ esterification with boric acid proved to be a suitable strategy to maintain enhanced selectivities at much higher conversions (TON>60). Altogether, a useful catalytic system for the selective hydroxylation of primary aliphatic C−H bonds with O₂ is presented.     

Thermodynamic study of transthyretin association (wild‐type and senile forms) with heparan sulfate proteoglycan: pH effect and implication of the reactive histidine residue

The tetramer destabilization of transthyretin into monomers and its fibrillation are phenomena leading to amyloid deposition. Heparan sulfate proteoglycan (HSPG) has been found in all amyloid deposits. A chromatographic approach was developed to compare binding parameters between wild‐type transthyretin (wtTTR) and an amyloidogenic transthyretin (sTTR). Results showed a greater affinity of sTTR for HSPG at pH 7.4 compared with wtTTR owing to the monomeric form of sTTR. Analysis of the thermodynamic parameters showed that van der Waals interactions were involved at the complex interface for both transthyretin forms. For sTTR, results from the plot representing the number of protons exchanged vs pH showed that the binding mechanism was pH‐dependent with a critical value at a pH 6.5. This observation was due to the protonation of a histidine residue as an imidazolium cation, which was not accessible when TTR was in its tetrameric structure. At pH >6.5, dehydration at the binding interface and several contacts between nonpolar groups of sTTR and HSPG were also coupled to binding for an optimal hydrogen‐bond network. At pH <6.5, the protonation of the His residue from sTTR monomer when pH decreased broke the hydrogen‐bond network, leading to its destabilization and thus producing slight conformational changes in the sTTR monomer structure. Copyright © 2014 John Wiley & Sons, Ltd.     

Combined supercritical-fluid chromatography/mass spectrometry in the analysis of diuron in plasma using on-line phase-system switching

On-line sample pretreatment by means of the phase-system switching approach is an interesting technique for the analysis of aqueous samples, e.g., plasma, by means of supercritical-fluid chromatography. In order to analyse plasma samples the following analytical procedure is used. The plasma sample is injected on to a short precolumn, which is washed with water and subsequently dried with nitrogen. Next, the solutes are desorbed with the supercritical mobile phase, analysed with packed-column supercritical-fluid chromatography and detected with either a UV detector or a mass spectrometer, equipped with a moving-belt interface. The herbicide diuron is selected as a test compound to study the feasibility of this approach. Using a selective detector the procedure is sufficiently sensitive to detect diuron in plasma, but not appropriate to detect the diuron metabolites in a post-mortem plasma sample. These have been identified with liquid chromatography/mass spectrometry. The detection limit of diuron in plasma using the procedure described is about 30 ng/mL.     

Dependence of the kinetics of the anionic polymerization of methyl methacrylate on the concentration in active centers

Studies on the anionic polymerization of methyl methacrylate in tetrahydrofuran and in the presence of sparteine have revealed a beneficial effect due to this additive, resulting in a decrease in the extent of termination. Better control of the definition of the polymers formed can thus be achieved in the presence of this additive. On the other hand, macromolecular engineering requires a range of active species concentrations lower than 10^?3 mol L^?1 and particularly the synthesis of polymers of high molar masses. For a better understanding of the mechanism of chain growth under such concentration conditions, the kinetics of polymerization have been investigated with a technique based on adiabatic calorimetry. Sparteine has been found to lack sufficient cation‐binding power to prevent the propagating enolate ion pairs from aggregating. The rate constant of propagation of nonaggregated species has been estimated, as well as the aggregation constant of equilibrium. For very low initiator concentrations, termination reactions have been shown to profoundly alter the control of the polymerization and to prevent a quantitative monomer conversion. Theoretical maximal conversions have been calculated from kinetic data and compare well with the experimental values. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4964–4975, 2004     

Comparative behavior of polybutadiene and polynorbornene‐based latices prepared by dispersion ring‐opening metathesis polymerization with a poly(ethylene oxide) macromonomer

This study critically examines the similarities and differences between poly(ethylene oxide) (PEO) stabilized latices of polynorbornene and polybutadiene. Features such as the kinetics of copolymerization of norbornene and cyclooctadiene with a macromonomer of PEO, the particles' size and morphology, the type of copolymer formed, and the stability of these latices were investigated and the results obtained are considered. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2705–2716, 2004     

Determination of microtacticity of poly(vinylketones) and their derivatives by NMR spectroscopies of carbon-13 and proton

Sequence distribution of atactic poly(phenylvinylketone) (PPVK) has been determined by [¹³C]-[¹H]NMR spectroscopy. Quantitative analysis of the carbonyl pattern allows resolution into pentads with intensities fitting a first order Markov process. The carbonyl pattern of highly isotactic PPVK, initiated by diethylzinc, deviates strongly from Bernoullian statistics, as in the case of highly isotactic polymethylvinylketone (PMVK). For n-butyl-lithium initiated poly(isopropenylphenylvinylketone) (PIPK), the carbonyl pattern practically agrees with a Bernoullian distribution. Atactic PMVK, analyzed from the methylene and the carbonyl pattern in [¹³C] or [¹H]NMR, shows that the polymerization process is purely Bernoullian and quite different from that for poly(isopropenylmethylketone). Except for poly(methylallylalcohol) for which the tacticity can be determined, the resolution is too poor to allow a quantitative sequence distribution of poly(allylalcohols) or poly(allyltrifluoroacetates). [¹H] and [¹⁹F]NMR spectroscopies of these compounds do not give better results.     

Annoyance caused by simultaneous impulse, road-traffic, and aircraft sounds: a quantitative model.

In this study, total annoyance caused by different simultaneous environmental sounds is investigated. In spite of a number of puzzling data in the literature, it is fairly well established that in combinations in which the annoyance of one source is considerably higher than that of another source, total annoyance is equal to the maximum annoyance of the separate sources. For combinations in which both sounds are about equally annoying, total annoyance seems to be higher than the maximum source-specific annoyance. The available data, however, are too rough to model total annoyance in these conditions. The present laboratory studies were therefore designed to explore further possible procedures to quantify total annoyance. Subjects rated the (total) annoyance caused by various combinations of impulse, road-traffic, and aircraft sounds. The results support a simple model which predicts the overall or total rating sound level L(t) for combinations of several types of sounds. Here, L(t) is numerically equal to the A-weighted equivalent sound level L(eq) of road-traffic sound with the same annoyance as caused by the combination of sounds. In the model, the sound exposure caused by the impulse and/or aircraft sounds is first expressed in the L(eq) of equally annoying road-traffic sound. With the help of source-specific dose-effect relationships, this is achieved by adding level-dependent penalties to the L(eq) of the respective sources. Weighted summation of the corrected L(eq)'s of the various sources then results in L(t). An optimal overall fit of the data from two separate experiments was obtained when the weighted summation of the corrected L(eq)'s was performed with the parameter k in k log(sigma 10(corrected L(eq) of source j)/k) set to 15. The standard deviation of the differences between the experimental results and the model predictions with k = 15 was equivalent to the small change in annoyance produced by a 1.5-dB shift in the L(eq) of road-traffic sound. Adoption of k = 15 implies that after correction, two equal L(eq)'s yield a total rating sound level which is 4.5 dB higher than each single-source corrected L(eq).