Foams and surface rheological properties of β-casein, gliadin and glycinin

Interfacial rheological properties and their suitability for foam production and stability of two vegetable proteins were studied and compared to β-casein. Proteins used ranged from flexible to rigid/globular in the order of β-casein, gliadin and soy glycinin. Experiments were performed at pH 6.7. Network forming properties were characterised by the surface dilational modulus (determined with the ring trough) and the critical falling film length (L_still) at which a stagnant protein film will break. Gliadin had the highest dilational modulus, followed by glycinin and β-casein, whereas glycinin formed the strongest film against fracture in the overflowing cylinder. The rate of decrease in the surface tension was studied at the air–water (Wilhelmy plate method) and the oil–water interface (bursting membrane) and the dynamic surface tension during compression and expansion in the caterpillar. Gliadin had the lowest equilibrium interfacial tensions and β-casein the lowest dynamic surface tension during expansion. Hardly any foam could be formed at a concentration of 0.1 g/l by shaking. At a concentration of 1.4 g/l most foam was formed by β-casein, followed by gliadin and glycinin. It seems that in the first place the rate of adsorption is important for foam formation. For the vegetable proteins, adsorption was slow. This resulted in lower foamability, especially for glycinin.     

Determination of calcium in water by flow injection analysis — inductively coupled plasma (FIA-ICP) emission spectrometry

Summary Using an 11 ml centrifugal type spray chamber, a rapid sample introduction rate of 320 injections per hour may be achieved when interfacing flow injection analysis and inductively coupled plasma emission spectrometric techniques. Calcium was determined in water samples with a relative standard deviation of better than 3.5% over the analytical range of 10 to 200 mg · l^–1 Ca. Mean recovery was 97%.

---

Calciumbestimmung im Wasser mit dem Flow-injection-Prinzip kombiniert mit der Induktions-gekoppelten Plasma-Emissions-Spektrometrie (FIA-ICP)

     

Large‐scale extrusion processing and characterization of hybrid nylon‐6/SiO2 nanocomposites

Solution impregnations, pulltrusion and film stacking are widely used methods to prepare thermoplastic composite materials. Extruders are used to melt the polymer and to incorporate fibers into the polymer in order to modify physical properties. In this article, the compounding of colloidal silica nanoparticles filled polyamide‐6 (PA‐6) is achieved using a twin‐screw extruder, which has a significant market share due to its low cost and easy maintenance. The experiments were performed at 250 rpm and the bulk throughput was 6 kg h^?1 with a pump pressure of 30 bars. The composites were characterized with nuclear magnetic resonance (NMR), wide angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC) and transmission electron microscopy (TEM). As determined by WAXD, the PA‐6 showed higher amounts of γ‐phase when compared to other synthesis methods such as in situ polymerization. TEM pictures showed that the silica particles aggregated nevertheless, upon addition of 14% (w/w) silica the E‐modulus increased from 2.7 to 3.9 GPa indicating that an effective mechanical coupling with the polymer was achieved. The behavior, illustrated with dynamic mechanical analysis (DMA) curves, indicated that in general when a filled system is compared to unfilled material, the values of the moduli (E′ and E″) increased and tan δ decreased. Determination of molecular mass distribution of the samples by means of size exclusion chromatography (SEC) coupled to a refractive index (RI), viscosity (DV) and light scattering (LS) detector revealed that the addition of silica did not decrease the average molecular weight of the polymer matrix, which is of importance for composite applications. Copyright © 2004 John Wiley & Sons, Ltd.     

Chemical separation activities in environmental management at the Idaho National Engineering and Environmental Laboratory

Besides a brief review of the INEEL, examples of chemical separation activities in environmental management are presented in this paper. Under development at the INEEL are separation technologies for the treatment of radioactive wastes, including highly radioactive liquid wastes, solid calcined wastes and mixed wastes, as well as contaminated groundwater and soils. An overview of these technologies, specific applications of the technologies, and the benefits from their use are discussed.     

Quercetin Prevents UV-lnduced Local Immunosuppression, but Does Not Affect UV-lnduced Tumor Growth in SKH-1 Hairless Mice

Abstract— Ultraviolet is thought to induce skin tumors by its dual activity as a mutagenic agent and a suppressor of cell-mediated immunity. In the present study the effects of quercetin, a flavonoid-containing compound, on carcinogenesis and immunosuppression were studied in SKH hairless mice exposed to suberythemal doses of UV for up to 17 weeks. It was found that quercetin did not affect the onset or growth of non-melanoma skin tumors resulting from UV exposure. In contrast, it prevented the suppression in contact hypersensitivity (CHS) to picryl chloride induced by UV. The mechanism of this prevention might be explained by the observation that the decreased number of epidermal Langerhans'cells is partly prevented by the quercetin. Quercetin did not alter the effects of UV in increasing numbers of spleen and lymph node cells, only partly in decreasing the CD8-positive cells in spleen cell populations and decreasing the lym-phoproliferative response of spleen cells to the mitogens concanavalin A and phytohemagglutinin. Thus oral quercetin did not prevent UV-induced carcinogenesis although it restored the skin-associated CHS response probably by protecting the antigen-presenting cells in the skin.     

Quarter wave plates for submillimeter wavelengths

A review is given of different types of quarter wave plates as presently used in the optical and microwave spectral range, with a view to their application in the sub-mm wave-length range. Two types of quarter wave plates have been constructed and results of measurements at 640m are given.     

Network forming properties of various proteins adsorbed at the air/water interface in relation to foam stability

A series of proteins was studied with respect to their ability to form a network at the air/water interface and their suitability as foaming agents and foam stabilizers. Proteins were chosen with a range of structures from flexible to rigid/globular: beta-casein, beta-lactoglobulin, ovalbumin, and (soy) glycinin. Experiments were performed at neutral pH except for glycinin, which was studied at both pH 3 and pH 6.7. The adsorption process was followed with an automated drop tensiometer (ADT). Network forming properties were assessed in terms of surface dilational modulus (determined with the ADT), the critical falling film length (L(still)) and flow rate (Q(still)) below which a stagnant film exists (as measured with the overflowing cylinder technique), and the fracture stress and fracture strain measured in surface shear. It was found that glycinin (pH 3) can form an interfacial gel in a very short time, whereas beta-casein has very poor network-forming properties. Hardly any foam could be produced at the chosen conditions with glycinin (pH 6.7) and with ovalbumin, whereas beta-casein, beta-lactoglobulin, and glycinin (pH 3) were good foaming agents. It seems that adsorption and unfolding rate are most important for foam formation. Once the foam is formed, a rigid network might favor stabilizing the foam.     

Permeability of heterogeneous gels

Gels made by radical copolymerization of monofunctional and difunctional monomer units in the presence of swelling medium will tend to be heterogeneous. A case in point is acrylamide co-polymerized with N,N′-methylene bis-acrylamide in water. Such gels can be assumed to be two-phasic with both phases gels, but of different average concentration and average degree of cross-linking. As Weiss and Silberberg have shown, permeability can be used to characterize the distribution in space. In this paper, their earlier model is expanded and improved by considering specifically the permeability of each of the two phases and taking into account that each of these phases separately must have come into swelling equilibrium with the swelling medium, water. It can be shown that only the length of the Kuhn statistical element remains as a free parameter in this model. Essentially the same value of this parameter, however, accurately accounts for the measured permeability. It is found that at an overall volume fraction of about 0.16, the two-phase structure tends to disappear. For higher degrees of crosslinking, this occurs because the more dilute phase takes over the entire space; for more lightly crosslinked systems, the more concentrated phase takes over. The heterogeneity of the distribution lies in the nanometer range and reasonable agreement between the results obtainable from permeability and from viscoelasticity can be demonstrated. These results are consistent with the model for the polymerization process.