Anisotropic Elastic-Viscoplastic Properties at Finite Strains of Injection-Moulded Low-Density Polyethylene

Injection-moulding is one of the most common manufacturing processes used for polymers. In many applications, the mechanical properties of the product is of great importance. Injection-moulding of thin-walled polymer products tends to leave the polymer structure in a state where the mechanical properties are anisotropic, due to alignment of polymer chains along the melt flow direction. The anisotropic elastic-viscoplastic properties of low-density polyethylene, that has undergone an injection-moulding process, are therefore examined in the present work. Test specimens were punched out from injection-moulded plates and tested in uniaxial tension. Three in-plane material directions were investigated. Because of the small thickness of the plates, only the in-plane properties could be determined. Tensile tests with both monotonic and cyclic loading were performed, and the local strains on the surface of the test specimens were measured using image analysis. True stress vs. true strain diagrams were constructed, and the material response was evaluated using an elastic-viscoplasticity law. The components of the anisotropic compliance matrix were determined together with the direction-specific plastic hardening parameters.     

Novel nucleophilic substitution of alkyl bromo-2(1H)-pyridones

Nucleophilic substitution of certain alkyl bromo-2(1H)-pyridones gave some unexpected products where the alkyl group is substituted and the ring bromine is replaced by hydrogen. The expected ring substituted product is also formed, but only as the minor product in most cases. Many reactions are cited with various nucleophiles, and a plausible mechanism is also presented.     

Synthesis of nucleosides of substituted 3-hydroxypyrazoles

N-Glucoside analogs of the antibiotic pyrazofurine were obtained by fusion of 3-hydroxy-4-ethoxycarbonylpyrazole with tetra-O-acetyl-ß-D-ribofuranose in the presence of iodine.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1512–1514, November, 1981.     

Two-step upflow anaerobic sludge bed system for sewage treatment under subtropical conditions with posttreatment in waste stabilization ponds

A pilot-scale sewage treatment system consisting of two upflow anaerobic sludge bed (UASB) reactors followed by five waste stabilization ponds (WSPs) in series was studied under subtropical conditions. The first UASB reactor started up in only 1 mo (stable operation, high chemical oxygen demand [COD] removal efficiency, low volatile fatty acids concentration in the effluent, alkalinity ratio above 0.7, biogas production above 0.1 Nm3/kg of CODremoved). Removal efficiencies up to 90% were obtained in the anaerobic steps at a hydraulic retention time of 6 + 4 h (80% removal in the first step). Fecal coliform removal in the whole system was 99.9999% (99.94% in anaerobic steps and 99.98% in WSPs). COD balances over UASB reactors are provided. A minimum set of data necessary to build COD balances is proposed. Intermittent sludge washout was detected in the reactors with the COD balances. Sludge washout from single-step UASB reactors should be monitored and minimized in order to ensure constant compliance with discharge standards, especially when no posttreatment is provided. The system combined high COD and fecal coliform removal efficiency with an extremely low effluent concentration, complying with discharge standards, and making it an attractive option for sewage treatment in subtropical regions.     

The migrastatin family: discovery of potent cell migration inhibitors by chemical synthesis

The first asymmetric total synthesis of (+)-migrastatin (1), a macrolide natural product with anti-metastatic properties, has been accomplished. Our concise and flexible approach utilized a Lewis acid-catalyzed diene aldehyde condensation (LACDAC) to install the three contiguous stereocenters and the trisubstituted (Z)-alkene of migrastatin (2 + 3 --> 21). Construction of the two remaining stereocenters and incorporation of the glutarimide-containing side chain was achieved by an anti-selective aldol addition of propionyl oxazolidinone 28 to angelic aldehyde 27, followed by a Horner-Wadsworth-Emmons (HWE) coupling of 32 with glutarimide aldehyde 5. Finally, the assembly of the macrocycle was realized by a highly (E)-selective ring-closing metathesis (35 --> 37). Utilizing the power of diverted total synthesis (DTS), a series of otherwise inaccessible analogues was prepared and evaluated for their potential as tumor cell migration inhibitors in several in vitro assays. These studies revealed a dramatic increase in activity when the natural motif was considerably simplified, presenting macrolactones 45 and 48, as well as macrolactam 55, macroketone 60, and CF(3)-alcohol 71 as promising anti-metastatic agents.     

Rhodium-catalyzed dehydrocoupling of the sterically encumbered phosphine-borane adduct tBu(2)PH.BH(3): synthesis of the linear dimers tBu(2)PH-BH(2)-tBu(2)P-BH(3) and tBu(2)PH-BH(2)-tBu(2)P-BH(2)Cl

The dehydrocoupling of the sterically hindered phosphine-borane adduct tBu(2)PH.BH(3) above 140 degrees C is catalyzed by the rhodium complexes [Rh(1,5-cod)(2)][OTf] or Rh(6)(CO)(16) to give the four-membered chain tBu(2)PH-BH(2)-tBu(2)P-BH(3) (1), which was isolated in 60% yield and characterized by multinuclear NMR spectroscopy, mass spectrometry, and elemental analysis. Thermolysis of 1 in the temperature range 175-180 degrees C led to partial decomposition and the formation of tBu(2)PH.BH(3). When the dehydrocoupling of tBu(2)PH.BH(3) was performed in the presence of [[Rh(mu-Cl)(1,5-cod)](2)] or RhCl(3) hydrate, the chlorinated compound tBu(2)PH-BH(2)-tBu(2)P-BH(2)Cl (2) was formed which could not be obtained free of 1. The molecular structures of tBu(2)PH.BH(3), tBu(2)PH-BH(2)-tBu(2)P-BH(3) (1), and tBu(2)PH-BH(2)-tBu(2)P-BH(2)Cl (2) together with 1 were determined by single-crystal X-ray diffraction studies.     

(Perhalogenmethylthio)heterocyclen. X. Säurekatalysierte Substitutionen an (Perchlorfluormethylthio)pyrrolen und deren agrobiologische Wirkung

(Perhalomethylthio)heterocycles. X

1 IX. Mitt.: s. [1].

. Acid-catalyzed substitutions on (perchlorofluoromethylthio)pyrroles and their agro-biological activities In the presence of C₄F₉SO₃H the (perhalomethylthio)pyrroles 1a–c react with Cl_3?nF_nCSCl (n = 1–3) to give mixtures of the 2,5- and 2,4-disubstituted pyrroles 2a–f and 3a–h . 2a and 3a react with CF₃SCl (catalyst CF₃SO₃H) yielding 2,3,5-tris (trifloromethylthio)pyrrole ( 4a ), which under similar conditions reacts further to give 2,3,4,5-tetrakis (trifluoromethylthio)pyrrole ( 5 ). As a by-product during the conversion of 3a to 4a 2,3,4-tris (trifluoromethylthio)pyrrole ( 4b ) is formed. The pyrroles 2a , 4a and 5 form the mercury salts 6a–c ; compound 5 yields also a silver salt 7 . The ¹H- and ¹⁹F-NMR. spectra are discussed and the agro-biological properties of the compounds investigated.     

A π-acceptor series for phosphines from51V N.M.R. data on [η5-CpV(CO)3L] complexes

Summary Qualitative molecular orbital considerations of the complexes [⁵-CPV(CO)₃ L] (L = substituted phosphane, SbPh₃, AsPh₃, CN^–) suggest that s' V chemical shift parameters () obtained for these compounds should correlate with the -acceptor abilities of L. Based on observed r-values, the ligands are arranged in sequence of their -acceptor ability, which lies in the order P(OR)₃ > CN^– > PR'₃3 SbPh₃ PPhF₂ > P(i-Bu)₃ P(NR ₂ )₃ > PPh₃ > AsPh₃ Nuclear spin-spin coupling constants J (⁵¹V-³¹ P), line widths H and i.r. data in the (CO) region are also presented.P(OR)₃ = P(OEt)₃, 4-Ethyl-l-phospha-2,6,7-trioxabicyclo[2.2.2]-octane; R = Me, n-Pr; R = Me, Et.     

Chemistry of phosphine-borane adducts at platinum centers: synthesis and reactivity of PtII complexes with phosphinoborane ligands

Reaction of [Pt(PEt(3))(3)] with the primary and secondary phosphine-borane adducts PhRPH x BH(3) (R=H, Ph) resulted in oxidative addition of a P-H bond at the Pt(0) center to afford the complexes trans-[PtH(PPhR x BH(3))(PEt(3))(2)] (1: R=H; 2: R=Ph). The products 1 and 2 were characterized by (1)H, (11)B, (13)C, (31)P, and (195)Pt NMR spectroscopy, and the molecular structures were verified by X-ray crystallography. In both cases, a trans arrangement of the hydride ligand with respect to the phosphidoborane ligand was observed. When 2 was treated with PhPH(2) x BH(3), a novel phosphidoborane ligand-exchange reaction occurred which yielded 1 and Ph(2)PH x BH(3). Treatment of 2 with one equivalent of depe (depe=1,2-bis(diethylphosphino)ethane) resulted in the formation of the complex cis-[PtH(PPh(2) x BH(3))(depe)] (3), in which the hydride ligand and the phosphidoborane ligand are in a cis arrangement. Treatment of 3 with PhPH(2) x BH(3) was found to result in an exchange of the phosphidoborane ligands to give the complex cis-[PtH(PPhH x BH(3))(depe)] (4) and Ph(2)PH x BH(3). Complex 4 was found to undergo further reaction in the presence of PhPH(2) x BH(3) to give meso-cis-[Pt(PPhH x BH(3))(2)(depe)] (5) and rac-cis-[Pt(PPhH x BH(3))(2)(depe)] (6).     

Development of a New Class of Inhibitors for the Malarial Aspartic Protease Plasmepsin II Based on a Central 7‐Azabicyclo[2.2.1]heptane Scaffold

Plasmepsin II (PMII), a malarial aspartic protease involved in the catabolism of hemoglobin in parasites of the genus Plasmodium, and renin, a human aspartic protease, share 35% sequence identity in their mature chains. Structures of 4‐arylpiperidine inhibitors complexed to human renin were reported by Roche recently. The major conformational changes, compared to a structure of renin, with a peptidomimetic inhibitor were identified and subsequently modeled in a structure of PMII (Fig. 1). This distorted structure of PMII served as active‐site model for a novel class of PMII inhibitors, according to a structure‐based de novo design approach (Fig. 2). These newly designed inhibitors feature a rigid 7‐azabicyclo[2.2.1]heptane scaffold, which, in its protonated form, is assumed to undergo ionic H‐bonding with the two catalytic Asp residues at the active site of PMII. Two substituents depart from the scaffold for occupancy of either the S1/S3 or S2′‐pocket and the hydrophobic flap pocket, newly created by the conformational changes in PMII. The inhibitors synthesized starting from N‐Boc‐protected 7‐azabicyclo[2.2.1]hept‐2‐ene ( 6 ; Schemes 1–5) displayed up to single‐digit micromolar activity (IC₅₀ values) toward PMII and good selectivity towards renin. The clear structure? activity relationship (SAR; Table) provides strong validation of the proposed conformational changes in PMII and the occupancy of the resulting hydrophobic flap pocket by our new inhibitors.