Molecular structure,vibrational spectroscopic and chemical reactivity of nematogenic p-n-alkylbenzoic acids: A comparative computational analysis

Molecular structure and vibrational spectroscopic studies of higher homologous series nematogenic p-n-alkylbenzoic acids (nBAC) that have 6 (6BAC) and 7 (7BAC) carbon atoms in the alkyl chain have been investigated using the Density Functional Becke3-Lee-Yang-Parr (B3LYP) level with the basis set 6-31++G (d.p) and Hartree Fock (HF) with the same basis set. The observed vibrational spectra has been resolved and assigned in detail for comparision with both the molecules. These results indicate that DFT and HF values are slightly different at both the levels. A comparision of chemical reactivity such as HOMO (E_H), LUMO (E_L) energies, energy gap (E_g), ionization energy (I), electron affinity (A), electro negativity (χ), chemical hardness (η), electronic chemical potential (μ), electrophilicity index (ω), and softness (S) has been made. It has been observed that the decrement has occurred in the energy band gap value of isolated molecule with increment in alkyl chain length. This provides valuable information regarding enhancing the stability of liquid crystal materials by maintaining the conductivity.     

Investigating the interface of superhydrophobic surfaces in contact with water

Neutron reflectivity (NR) is used to probe the solid, liquid, vapor interface of a porous superhydrophobic (SH) surface submerged in water. A low-temperature, low-pressure technique was used to prepare a rough, highly porous organosilica aerogel-like film. UV/ozone treatments were used to control the surface coverage of hydrophobic organic ligands on the silica framework, allowing the contact angle with water to be continuously varied over the range of 160 degrees (superhydrophobic) to <10 degrees (hydrophilic). NR shows that the superhydrophobic nature of the surface prevents infiltration of water into the porous film. Atomic force microscopy and density functional theory simulations are used in combination to interpret the NR results and help establish the location, width, and nature of the SH film-water interface.     

A new macrocyclic polystyrene-based sensor for chromium (III) ions

A new tetradentate dihydrogen perchlorate macrocyclic ligand (2,4,9,11-tetraphenyl-1,5,8,12-tetraazacyclotetradeca-1,4,8,11-tetraene dihydrogen perchlorate) was prepared and characterised. The macrocycle behaves as a selective chelating ion-exchanger for some metal ions. The polystyrene-based membrane electrode is found to exhibit quite promising selectivity for Cr3+ ions. It can be used to estimate chromium concentrations in the range 3.16x 10(-6)-1.00x10(-1) M with a near-Nernstian slope of 17.5 mV per decade of concentration between pH 3.0 to 6.5. The electrode is found to possess a fast response time of 15 s and was used over a period of three months with good reproducibility (s = +/- 0.3 mV). The selectivity coefficient values for mono-, di- and trivalent cations indicate excellent selectivity for Cr3+ ions over a large number of other cations. Anions such as Cl- and SO4(2-) do not interfere and the electrode also works satisfactorily in a mixed organic-water solution. The sensor has been used as an indicator electrode for the potentiometric titration of Cr3+ with EDTA. The practical utility of the membrane sensor has also been demonstrated in solutions contaminated with detergents (CTAB and SDS). Above all, the membrane sensor has been very successfully used to determine Cr3+ in some foods.     

Oxidation of Fe2+ ions by transfer of energy from γ-irradiated NaCl in aqueous Fricke solution

The oxidation of iron/II/ ions has been studied by dissolving -irradiated NaCl crystals in aqueous Fricke solution. The yield of iron/III/ ions was determined as a function of the amount of NaCl added, storage time, dose, concentration of iron/II/ ions and pH of the Fricke solution. The energy transfer parameter, , which is the ratio of G/Fe³⁺/ obtained by the addition of irradiated NaCl to that by direct radiolysis was evaluated.     

Stereochemical investigations of a novel class of chiral phosphapalladacycle complexes derived from 1-[(2,5-dimethyl)phenyl]ethyldiphenylphosphine

The phosphapalladacycle derived from 1-(2',5'-dimethylphenyl)ethyldiphenylphosphine has been prepared in the optically active and racemic forms. The phosphine was synthesized as a racemate by the treatment of 1-chloro-1-(2',5'-dimethylphenyl)ethane with sodium diphenylphosphide in THF. The racemic phosphapalladacycle was subsequently obtained as the chloro-bridged dimer by the treatment of the phosphine with palladium(II) acetate followed by anion metathesis with lithium chloride. Alternatively, the phosphine could be optically resolved via metal complexation using (R,R)-bis(mu-chloro)bis{1-[1-(N,N-dimethylamino)ethyl]naphthyl-C(2),N}dipalladium(II) as the resolving agent. An efficient separation of the resulting diastereomeric complexes was achieved by silica gel chromatography. The obtained optically resolved diastereomers were next subject to chemoselective removal of the (R)-N,N-(dimethylamino)-1-(1-naphthyl)ethylaminate auxiliary by treatment with concentrated hydrochloric acid. This process yielded the binuclear dimer complexes containing the resolved eta(1)-P ligand. Cyclopalladation of the coordinated phosphine could next be performed by treatment of its eta(1)-P binuclear dimer with silver(I) hexafluorophosphate(V) in a dichloromethane/water mixture followed by treatment with lithium chloride, giving rise to a pair of optically pure enantiomeric dimers with [alpha](D) -322 and +319 degrees in CH(2)Cl(2). Despite the possibilities of the phosphine to attain a five- membered structure by ortho-palladation or a six-membered ring formation by aliphatic C-H bond activation, only the former was observed. X-ray crystallographic data of the meso dimer and an acetylacetonate derivative indicated that the phosphapalladacycle alpha-C methyl substituent was axially located. The 2-D (1)H-(1)H ROESY spectrum of the acetylacetonate derivative further revealed that the phosphapalladacycle was conformationally rigid in CDCl(3).     

Self-assembly of rings, catenanes, and a doubly braided catenane containing gold(I): the hinge-group effect in diacetylide ligands

Reaction of the flexible dialkynyldigold(I) precursors X(4-C6H4OCH2C-CAu)2 with 1,4-bis(diphenylphosphino)butane gave complexes of formula [[[mu-X(4-C6H4OCH2CCAu)2[mu-(Ph2PCH2CH2CH2CH2PPh2)]]n]. The complexes exist as 25-membered ring compounds with n = 1 when X = O or S, as [2]catenanes with n = 2 when X = CH2 or CMe2, and as a unique doubly braided [2]catenane, containing interlocked 50-membered rings with n = 4 when X = cyclohexylidene. These compounds form easily and selectively by self-assembly; reasons for the selectivity are also discussed.     

High-resolution Mn EXAFS of the oxygen-evolving complex in photosystem II: structural implications for the Mn4Ca cluster

The biological generation of oxygen by the oxygen-evolving complex in photosystem II (PS II) is one of nature's most important reactions. The recent X-ray crystal structures, while limited by resolutions of 3.2-3.5 A, have located the electron density associated with the Mn4Ca cluster within the multiprotein PS II complex. Detailed structures critically depend on input from spectroscopic techniques, such as EXAFS and EPR/ENDOR, as the XRD resolution does not allow for accurate determination of the position of Mn/Ca or the bridging and terminal ligand atoms. The number and distances of Mn-Mn/Ca/ligand interactions determined from EXAFS provide important constraints for the structure of the Mn4Ca cluster. Here, we present data from a high-resolution EXAFS method using a novel multicrystal monochromator that show three short Mn-Mn distances between 2.7 and 2.8 A and, hence, the presence of three di-mu-oxo-bridged units in the Mn4Ca cluster. This result imposes clear limitations on the proposed structures based on spectroscopic and diffraction data and provides input for refining such structures.     

(Vapor + liquid) equilibria of the binary mixtures of m-cresol with C1-C4 aliphatic alcohols at 95.5 kPa

Bubble point temperatures at 95.5 kPa, over the entire composition range, are measured for the binary mixtures formed by m-cresol with: methanol, ethanol, 1-propanol, 2-propanol, and n-, iso-, sec-, and tert-butanols - using a Swietoslawski-type ebulliometer. The liquid phase composition - bubble point temperature measurements are well represented by the Wilson model. (Vapor + liquid) equilibria predicted from the model are presented.     

Single crystal X- and Q-band EPR spectroscopy of a binuclear Mn(2)(III,IV) complex relevant to the oxygen-evolving complex of photosystem II

The anisotropic g and hyperfine tensors of the Mn di-micro-oxo complex, [Mn(2)(III,IV)O(2)(phen)(4)](PF(6))(3).CH(3)CN, were derived by single-crystal EPR measurements at X- and Q-band frequencies. This is the first simulation of EPR parameters from single-crystal EPR spectra for multinuclear Mn complexes, which are of importance in several metalloenzymes; one of them is the oxygen-evolving complex in photosystem II (PS II). Single-crystal [Mn(2)(III,IV)O(2)(phen)(4)](PF(6))(3).CH(3)CN EPR spectra showed distinct resolved (55)Mn hyperfine lines in all crystal orientations, unlike single-crystal EPR spectra of other Mn(2)(III,IV) di-micro-oxo bridged complexes. We measured the EPR spectra in the crystal ab- and bc-planes, and from these spectra we obtained the EPR spectra of the complex along the unique a-, b-, and c-axes of the crystal. The crystal orientation was determined by X-ray diffraction and single-crystal EXAFS (Extended X-ray Absorption Fine Structure) measurements. In this complex, the three crystallographic axes, a, b, and c, are parallel or nearly parallel to the principal molecular axes of Mn(2)(III,IV)O(2)(phen)(4) as shown in the crystallographic data by Stebler et al. (Inorg. Chem. 1986, 25, 4743). This direct relation together with the resolved hyperfine lines significantly simplified the simulation of single-crystal spectra in the three principal directions due to the reduction of free parameters and, thus, allowed us to define the magnetic g and A tensors of the molecule with a high degree of reliability. These parameters were subsequently used to generate the solution EPR spectra at both X- and Q-bands with excellent agreement. The anisotropic g and hyperfine tensors determined by the simulation of the X- and Q-band single-crystal and solution EPR spectra are as follows: g(x) = 1.9887, g(y) = 1.9957, g(z) = 1.9775, and hyperfine coupling constants are A(III)(x) = |171| G, A(III)(y) = |176| G, A(III)(z) = |129| G, A(IV)(x) = |77| G, A(IV)(y) = |74| G, A(IV)(z) = |80| G.     

Rapid synthesis of α-ketoamides using microwave irradiation-simultaneous cooling method

Microwave-assisted acyl chloride-isonitrile condensation and CaCO₃-mediated hydrolysis constitute a one-pot, 2-minute process to prepare α-ketoamides.