Dark cure studies of cationic photopolymerizations of epoxides: Characterization of kinetic rate constants at high conversions

The effective propagation rate constant (k_p; averaged over all the propagating active centers) was characterized for solvent‐free cationic photopolymerizations of phenyl glycidyl ether over the entire range of conversions, including the high conversion regime in which mass transfer limitations become important. The profile for the k_p as a function of conversion was found to exhibit a constant plateau value at low to intermediate conversions, followed by a monotonic increase above a threshold value of conversion. To explain this trend, it is proposed that at high conversion the diffusional mobility of the photoinitiator counterion is reduced whereas the mobility of the cationic active center remains high because of reactive diffusion. Therefore, with increasing conversion, the average distance between the active centers and counterions may increase, resulting in an increase in the propagation rate constant. The profiles for the k_p values were investigated as a function of the temperature, photoinitiator anion, and photoinitiator concentration. As the photoinitiator concentration was increased, the plateau value of the effective propagation rate constant decreased whereas the threshold conversion increased. All of the experimental trends are consistent with the proposed increase in ion separation at high conversions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4409–4416, 2004     

Efficient synthesis of 1,4-dihydronaphthalenelignans from 5-methylene-4-substituted-2(5H)-furanones and a concise synthesis of solafuranone

A short synthetic strategy for synthesis of lignan analogues involving 5-methylene-4-substituted-2(5H)-furanones as the key intermediates has been developed. Various lignans including the natural product solafuranone and analogues of dihydrotaiwanin C and deoxydehydropodophyllotoxin were synthesized in good yields.     

A DC excited waveguide multibeam CO2 laser using high frequency pre-ionization technique

High power industrial multibeam CO₂ lasers consist of a large number of closely packed parallel glass discharge tubes sharing a common plane parallel resonator. Every discharge tube forms an independent resonator. When discharge tubes of smaller diameter are used and the Fresnel numberN ≪ 1 for all resonators, they operate in waveguide mode. Waveguide modes have excellent discrimination of higher order modes. A DC excited waveguide multibeam CO₂ laser is reported having six glass discharge tubes. Simultaneous excitation of DC discharge in all sections is achieved by producing pre-ionization using an auxiliary high frequency pulsed discharge along with its other advantages. Maximum 170 W output power is obtained with all beams operating in EH₁₁ waveguide mode. The specific power of 28 W/m is much higher as compared to similar AC excited waveguide multibeam CO₂ lasers. Theoretical analysis shows that all resonators of this laser will support only EH₁₁ mode. This laser is successfully used for woodcutting     

Diphenylcarbazone as an internal indicator in mercurimetric analysis: The determination of cerium by potassium thiocyanate

Summary The quantitative oxidation of thiocyanate by ceric sulphate has been studied and the method utilised for the determination of small quantities of cerium by back titrating the excess (unreacted) KSCN against standard mercuric nitrate with diphenylcarbazone as the internal indicator. Accurate results are obtained under the specified experimental conditions and the procedure is more simple and direct than that adopted during earlier studies of the above redox reaction.Grateful thanks of the author are due to Professor S. S. Joshi for facilities during the work and to the National Institute of Sciences of India for award of a Research Fellowship.     

Supramolecular assemblies of a naturally derived sophorolipid

Acidic sophorolipid (SL) molecules derived from yeasts represent a novel type of asymmetrical bolaamphiphiles due to their unique structural features that include an asymmetrical polar head size (disaccharide vs COOH), a kinked hydrophobic core (cis-9-octadecenoic chain), and a non-amide polar-nonpolar linkage. Light microscopy, small- and wide-angle X-ray scattering, FT-IR spectroscopy, and dynamic laser light scattering were used to investigate the supramolecular structures of the self-assembled aggregates of SL molecules at different pH values. In acidic conditions (pH < 5.5), giant twisted and helical ribbons of 5-11 microm width and several hundreds of micrometers length were observed for the first time. Increase in solution pH values slowed ribbon formation, decreased ribbon yield, and increased the helicity and entanglements of the giant ribbons. An interdigitated lamellar packing model of acidic SL-COOH molecules with a long period of 2.78 nm, stabilized by both the strong hydrophobic association between the cis-9-octadecenoic chains and strong disaccharide-disaccharide hydrogen bonding, is proposed. The neutralization of SL-COOH in water to SL-COONa produced clear solutions with the formation of short-range ordered aggregates. At concentrations below 1.0 mg/mL, the size of self-assembled aggregates increased as the concentration increased. At concentrations above 1.0 mg/mL, narrowly distributed micellar aggregates with a constant hydrodynamic radius (R(h)) of about 100 nm are formed. The large micelles show strong angular dependence with the fast mode appearing at scattering angle theta >/= 60 degrees.     

Polarographic separation of cobalt from nickel

Summary The polarographic behaviour of nickel and cobalt in the mixed base electrolytes, urea-pyridine and urea-hydrazine has been studied. The effect of p_H, concentration of supporting electrolyte and the presence of various other ions was investigated. Well defined polarograms for both the elements were obtained at p_H 6.0 and 5.0 respectively. Attempts were made to utilize these observations in the separation of the two cations. While the difference in E _1/2 of the ions in urea-pyridine was greater than –0.3 volts that in urea-hydrazine was about –0.2 volts or slightly less even under the optimum conditions. In a mixed solution the waves for Co and Ni were therefore well developed and separated in the former base electrolyte. The polarograms in urea-hydrazine were, however, of little analytical use because of the washing away of the Ni wave due to the presence of even small amounts of cobalt.

---

Zusammenfassung Das polarographische Verhalten von Nickel und Kobalt in Harnstoff-Pyridin- und Harnstoff-Hydrazinlösung wurde untersucht und der Einfluß des p_H-Wertes, der Leitsalzkonzentration sowie der Gegenwart verschiedener anderer Ionen festgestellt. Bei p_H 6,0 bzw. 5,0 wurden für beide Elemente gut ausgebildete Polarogramme erhalten. Es wurde versucht, die erhaltenen Ergebnisse zur Trennung der beiden Ionen zu benutzen. In Harnstoff-Pyridinlösung beträgt der Unterschied der beiden Halbstufenpotentiale mehr als –0,3 V und man erhält gut ausgebildete und voneinander getrennte Stufen. In Harnstoff-Hydrazinlösung dagegen beträgt der Unterschied nur –0,2 V oder etwas weniger, selbst unter optimaler Bedingungen, und die Ni-Stufe wird schon durch kleine Kobaltmengen beeinträchtigt.

     

Photocatalysed eosin Y mediated C(sp3)-H alkylation of amine substrates via direct HAT

A visible light promoted, photoredox catalysed, green one-pot approach for the alkylation of amine substrates with sp² carbon has been developed. This eosin Y based organic transformations, can behave as an effective direct hydrogen-atom transfer catalyst for coupling reaction. The proposed strategy includes simple procedure which can make adduct product with sp² carbon. This eosin Y based photocatalytic hydrogen-atom transfer strategy may hold great potential for diverse functionalization of a wide range of native CH bonds in an economical and sustainable manner.     

Proline-catalyzed asymmetric aldol reactions of tetrahydro-4H-thiopyran-4-one with aldehydes

Proline-catalyzed enantioselective direct intermolecular aldol reactions of tetrahydro-4H-thiopyran-4-one with various aldehydes give anti adducts with high diastereo- and enantioselectivities in moderate to excellent yields. With the aromatic aldehydes best results were obtained in wet DMF whereas dry DMSO generally was superior with the aliphatic aldehydes. Desulfurization of the adducts with Raney Ni provides products equivalent to aldols from 3-pentanone with potential applications in polypropionate synthesis.     

DNA polymerase template interactions probed by degenerate isosteric nucleobase analogs

The development of novel artificial nucleobases and detailed X-ray crystal structures for primer/template/DNA polymerase complexes provide opportunities to assess DNA-protein interactions that dictate specificity. Recent results have shown that base pair shape recognition in the context of DNA polymerase must be considered a significant component. The isosteric azole carboxamide nucleobases (compounds 1-5; ) differ only in the number and placement of nitrogen atoms within a common shape and therefore present unique electronic distributions that are shown to dictate the selectivity of template-directed nucleotide incorporation by DNA polymerases. The results demonstrate how nucleoside triphosphate substrate selection by DNA polymerase is a complex phenomenon involving electrostatic interactions in addition to hydrogen bonding and shape recognition. These azole nucleobase analogs offer unique molecular tools for probing nonbonded interactions dictating substrate selection and fidelity of DNA polymerases.     

OB-fold: growing bigger with functional consistency

It was predicted that the folding space for various protein sequences is restricted and a maximum of 1000 protein folds could be expected. Although, there were about 648 folds identified, general functional features of individual folds is not thoroughly studied. We selected OB-fold, which is supposed to be an oligonucleotide and oligosaccharide binding fold to study the general functional features. OB-fold is a small beta-barrel fold formed from 5 strands connected by modulating loops. We observed consistently 2 or 3 loops on the same face of barrel acting as clamps to bind to their ligands. Depending on the ligand, which could be a single or double stranded DNA/RNA or an oligosaccharide, and their conformational properties the loops change in length and sequence to accommodate various ligands. Different classes of OB-folded proteins were analyzed and found that the functional features are retained in spite of negligible sequence homology among various proteins studied.