Biosorption of Chromium(III) by Biomass of Seaweed Sargassum sp. in a Fixed-Bed Column

This work aimed at modeling chromium biosorption using the biomass of seaweed Sargassum sp. in a fixed-bed column. The mathematical model used was obtained from the mass balance of the component in the liquid phase and in the biosorbent material. The effects of both axial dispersion in the column and the resistance to mass transfer in the solid were considered for the solution of the partial differential equations of the model, using the Galerkin method on finite elements. To represent the equilibrium data of the batch system the Langmuir isotherm were used. The chromium ion adsorption capacity of the seaweed Sargassum sp., at a temperature of 30°C and pH 3.5, was 2.61 mmol/g. The model performance was evaluated from experimental data obtained at 30°C for flow rates of 2, 6 and 8 mL/min. The parameters of the model, mass transfer and axial dispersion coefficients, were adjusted from these experimental data. The model proved adequate to describe chromium biosorption dynamics in fixed-bed columns.     

On Producing Multiple Solutions Using Repeated Trials

The number of trials that is required by an algorithm to produce a given fraction of the problem solutions with a specified level of confidence is analyzed. The analysis indicates that the number of trials required to find a large fraction of the solutions rapidly decreases as the number of solutions obtained on each trial by an algorithm increases. In applications where multiple solutions are sought, this decrease in the number of trials could potentially offset the additional computational cost of algorithms that produce multiple solutions on a single trial. The analysis framework presented is used to compare the efficiency of a homotopy algorithm to that of a Newton method by measuring both the number of trials and the number of calculations required to obtain a specified fraction of the solutions.     

Loss in a rectangular optical waveguide induced by the crossover of a second waveguide

We calculate the loss induced in a single-mode rectangular optical waveguide by the presence of a second waveguide, perpendicular to the first, which crosses over the first waveguide at a variable distance d. Our calculation is applied to the analysis of several doped silica waveguides of practical importance for optical circuit design.     

Synthesis and thermal crosslinking of oxazolidine‐functionalized polyurethanes

A new oxazolidine derivative was obtained from phenol, 2‐amino‐2‐methylpropane‐1,3‐diol and paraformaldehyde. The reaction of this novel oxazolidine diol with phenylisocyanate lead to a urethane model compound which can be polymerized thermally by oxazolidine ring opening to give a Mannich bridge structure. Linear segmented polyurethanes were prepared by reaction of different ratios of oxazolidine diol and commercial polyethylenglycol (M_w ～ 400) with 4,4′‐methylenbis (cyclohexylisocyanate) (HMDI, 90% isomers mixture). The polyurethanes were thermally characterized and crosslinked by oxazolidine ring opening to obtain materials which showed improved thermal stability. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4965–4973, 2007     

Cation transport by a redox-active synthetic ion channel

The synthesis, cation binding and transmembrane conductive properties of a novel group of synthetic ion channels containing a redox-active centre are described. Experiments using a black lipid membrane preparation revealed that these compounds function effectively as ion channels. Subsequent 23Na NMR spectroscopy studies focused on a synthesized ion channel with a ferrocene centre. When incorporated in vesicular bilayers, this channel was demonstrated to support a Na+ flux that was at least six times faster than ion transport by monensin. Since oxidation of the ferrocene moiety completely inhibited the Na+ transport, the redox-active centre provides a potential mechanism for controlling ion flux.     

Do solid surface potential barriers retard convoy peak electrons?

Using a coaxial cylindric electron spectrometer and an electrostatic ion energy analyzer in tandem, a direct measurement of the difference of the energy of convoy peak electron and the electron equivalent ion energy of protons emerging from the downstream surface of C, Au and Al foils is performed in the proton energy range from 60 to 250 keV. This measurement is made possible using the accepted evidence that for a gas target these energies are equal. It is found that also for the beam foil convoy peak electrons, within an experimental average uncertainty of about ±0.1 eV, there is no difference between these energies. If one accepts that the origin of convoy electrons is from inside the solid, the conclusion is that no retardation by the solid surface potential barrier, which is of the order of a few eV, is observed. This is attributed to the strong electron-ion Coulomb interaction which almost completely overshadows the force exerted on the electron by the field of the surface barrier.     

Ethylene polymerization over supported MAO/(nBuCp)2ZrCl2 catalysts: Influence of support properties

The catalytic system methylaluminoxane (MAO) and bis(n-butylcyclopentadienyl)zirconium dichloride ((nBuCp)₂ZrCl₂) was immobilized on commercial silica, silica-alumina and aluminophosphate calcined at different temperatures. The properties of the supports were determined by using N₂ adsorption-desorption isotherms at 77 K, FT-IR spectroscopy and SEM. After aluminium and zirconium impregnation, the catalysts were analyzed by ICP-AES, FT-IR and UV-vis spectroscopy. Ethylene polymerizations were carried out in a Schlenk tube at 70 °C and 1.2 bar of ethylene pressure. The polyethylene obtained was characterized by GPC, DSC and SEM.Catalysts supported on silica-alumina exhibited higher polymerization activity than those supported on silica and aluminophosphate. Besides, the activity of MAO/(nBuCp)₂ZrCl₂ catalytic system supported on silica-alumina and aluminophosphate decreased strongly with support calcination temperature, while remained almost constant when silica was employed as support. All these experimental features suggest a role of the support acid properties and hydroxyl group population in the generation of active polymerization species.