Optimization of Transducer Location for Novel Non-Intrusive Methodologies of Diagnosis in Diesel Engines

The health monitoring has been studied to ensure integrity of design of engine structure by detection, quantification, and prediction of damages. Early detection of faults may allow the downtime of maintenance to be rescheduled, thus preventing sudden shutdown of machines. In cylinder pressure developed, vibrations and noise emissions data provide a rich source of information about condition of engines. Monitoring of vibrations and noise emissions are novel non-intrusive methodologies for which positioning of various transducers are important issue. The presented work shows applicability of these diagnosis methodologies adopted in case of diesel engines. The effects of changing various fuel injection parameters was analyzed. Scope of using non-intrusive technique has been analyzed by changing locations of microphone. Novelty of this worklies in exploring signal processing methods for various locations around the engine test set up. Various frequency ranges of contributing noise and vibration sources were identified. Time-Frequency analysis showed the onset of various cyclic. Based on the identification of various frequency bands, it is possible to device suitable filters in order to extract more information.     

Magnetized cosmological models in bimetric theory of gravitation

Bianchi type-III magnetized cosmological model when the field of gravitation is governed by either a perfect fluid or cosmic string is investigated in Rosen’s [1] bimetric theory of gravitation. To complete determinate solution, the condition, viz., A=(BC) ⁿ , where n is a constant, between the metric potentials is used. We have assumed different equations of state for cosmic string [2] for the complete solution of the model. Some physical and geometrical properties of the exhibited model are discussed and studied.     

Analysis of Corrugated Long-Period Gratings in Planar Waveguides and Their Polarization Dependence

We present a theoretical analysis of corrugated long-period gratings in planar waveguides. In particular, we calculate the transmission spectra for both the TE and TM polarizations and highlight the polarization-independence conditions.     

Cellulose-based fibers from liquid–crystalline solutions. II. Processing and morphology of acetate/butyrate esters

Fibers were spun from isotropic and anisotropic dimethylacetamide solutions of cellulose esters. Take-up speeds of the dry jet/wet spinning process varied. Water served as the coagulant. The mechanical properties of the fibers increased as spinning progressed from the isotropic to the anisotropic state of the solution. A trade-off in solubility and fiber properties was noted as the butyryl acetyl ratio decreased. Whereas high butyryl content enhances both overall solubility and the formation of liquid–crystalline solutions at lower concentration, it results in lower fiber modulus and strength. Morphology of the fibers depended on the coagulation rate which was influenced by the concentration of the sppinning solution. The level of orientation and crystallinity of the fibers increased somewhat when they were spun from liquid-crystalline solutions. © 1993 John Wiley & Sons, Inc.     

A simplified assay of furosemide in plasma and urine by high-pressure liquid chromatography.

A simplified high-pressure liquid chromatograhic method for determination of furosemide in plasma and urine has been developed using a fluorometric detector directly coupled to the column effluent. The method includes an ether extraction from acidified biologic samples. The mobile phase used for chromatography on a reversed-phase column (C15 hydrocarbon permanently bonded to silica particles) is sufficiently acidic to induce fluorescence of furosemide. The methylester of furosemide is employed as an internal standard. The sensitivity is 0.1 and 0.25 microgram per ml plasma and urine, respectively. The applicability to pharmacokinetic studies of furosemide is shown.     

Interior segment regrowth configurational-bias algorithm for the efficient sampling and fast relaxation of coarse-grained polyethylene and polyoxyethylene melts on a high coordination lattice

We demonstrate the application of a modified form of the configurational-bias algorithm for the simulation of chain molecules on the second-nearest-neighbor-diamond lattice. Using polyethylene and poly(ethylene-oxide) as model systems we show that the present configurational-bias algorithm can increase the speed of the equilibration by at least a factor of 2-3 or more as compared to the previous method of using a combination of single-bead and pivot moves along with the Metropolis sampling scheme [N. Metropolis, A. W. Rosenbluth, M. N. Rosenbluth, A. H. Teller, and E. Teller, J. Chem. Phys. 21, 1087 (1953)]. The increase in the speed of the equilibration is found to be dependent on the interactions (i.e., the polymer being simulated) and the molecular weight of the chains. In addition, other factors not considered, such as the density, would also have a significant effect. The algorithm is an extension of the conventional configurational-bias method adapted to the regrowth of interior segments of chain molecules. Appropriate biasing probabilities for the trial moves as outlined by Jain and de Pablo for the configurational-bias scheme of chain ends, suitably modified for the interior segments, are utilized [T. S. Jain and J. J. de Pablo, in Simulation Methods for Polymers, edited by M. Kotelyanskii and D. N. Theodorou (Marcel Dekker, New York, 2004), pp. 223-255]. The biasing scheme satisfies the condition of detailed balance and produces efficient sampling with the correct equilibrium probability distribution of states. The method of interior regrowth overcomes the limitations of the original configurational-bias scheme and allows for the simulation of polymers of higher molecular weight linear chains and ring polymers which lack chain ends.     

Heavy-metal remediation by a fungus as a means of production of lead and cadmium carbonate crystals

We show here that reaction of the fungus, Fusarium oxysporum, with the aqueous heavy-metal ions Pb2+ and Cd2+ results in the one-step formation of the corresponding metal carbonates. The metal carbonates are formed by reaction of the heavy-metal ions with CO2 produced by the fungus during metabolism and thus provide a completely biological method for production of crystals of metal carbonates. The PbCO3 and CdCO3 crystals thus produced have interesting morphologies that are shown to arise because of interaction of the growing crystals with specific proteins secreted by the fungus during reaction. An additional advantage of this approach is that the reaction leads to detoxification of the aqueous solution and could have immense potential for bioremediation of heavy metals. Under conditions of this study, the metal ions are not toxic to the fungus, which readily grows after exposure to the metal ions.     

Investigation on Impurity Profiling and Degradation Behavior of WCK 771

Chromatographia - WCK 771 is a novel antibacterial drug recently launched in India for the treatment of acute bacterial skin and skin structure infections (ABSSSI). This report describes...     

Novel Iodine Reagent System for Regioselective Cleavage of Epoxides to Alcohols

Epoxides are converted regioselectively to corresponding higher substituted alcohols with greater yields using diphosphorus tetraiodide (P₂I₄) as a reducing agent and a catalytic amount of tetraethylammonium bromide at room temperature.