Optimization of Transducer Location for Novel Non-Intrusive Methodologies of Diagnosis in Diesel Engines

The health monitoring has been studied to ensure integrity of design of engine structure by detection, quantification, and prediction of damages. Early detection of faults may allow the downtime of maintenance to be rescheduled, thus preventing sudden shutdown of machines. In cylinder pressure developed, vibrations and noise emissions data provide a rich source of information about condition of engines. Monitoring of vibrations and noise emissions are novel non-intrusive methodologies for which positioning of various transducers are important issue. The presented work shows applicability of these diagnosis methodologies adopted in case of diesel engines. The effects of changing various fuel injection parameters was analyzed. Scope of using non-intrusive technique has been analyzed by changing locations of microphone. Novelty of this worklies in exploring signal processing methods for various locations around the engine test set up. Various frequency ranges of contributing noise and vibration sources were identified. Time-Frequency analysis showed the onset of various cyclic. Based on the identification of various frequency bands, it is possible to device suitable filters in order to extract more information.     

Analysis of Corrugated Long-Period Gratings in Planar Waveguides and Their Polarization Dependence

We present a theoretical analysis of corrugated long-period gratings in planar waveguides. In particular, we calculate the transmission spectra for both the TE and TM polarizations and highlight the polarization-independence conditions.     

Cellulose-based fibers from liquid–crystalline solutions. II. Processing and morphology of acetate/butyrate esters

Fibers were spun from isotropic and anisotropic dimethylacetamide solutions of cellulose esters. Take-up speeds of the dry jet/wet spinning process varied. Water served as the coagulant. The mechanical properties of the fibers increased as spinning progressed from the isotropic to the anisotropic state of the solution. A trade-off in solubility and fiber properties was noted as the butyryl acetyl ratio decreased. Whereas high butyryl content enhances both overall solubility and the formation of liquid–crystalline solutions at lower concentration, it results in lower fiber modulus and strength. Morphology of the fibers depended on the coagulation rate which was influenced by the concentration of the sppinning solution. The level of orientation and crystallinity of the fibers increased somewhat when they were spun from liquid-crystalline solutions. © 1993 John Wiley & Sons, Inc.     

Heavy-metal remediation by a fungus as a means of production of lead and cadmium carbonate crystals

We show here that reaction of the fungus, Fusarium oxysporum, with the aqueous heavy-metal ions Pb2+ and Cd2+ results in the one-step formation of the corresponding metal carbonates. The metal carbonates are formed by reaction of the heavy-metal ions with CO2 produced by the fungus during metabolism and thus provide a completely biological method for production of crystals of metal carbonates. The PbCO3 and CdCO3 crystals thus produced have interesting morphologies that are shown to arise because of interaction of the growing crystals with specific proteins secreted by the fungus during reaction. An additional advantage of this approach is that the reaction leads to detoxification of the aqueous solution and could have immense potential for bioremediation of heavy metals. Under conditions of this study, the metal ions are not toxic to the fungus, which readily grows after exposure to the metal ions.     

Investigation on Impurity Profiling and Degradation Behavior of WCK 771

Chromatographia - WCK 771 is a novel antibacterial drug recently launched in India for the treatment of acute bacterial skin and skin structure infections (ABSSSI). This report describes...     

Data and device protection: A ToF‐SIMS,wetting, and XPS study of an Apple iPod nano

An important aspect of the robustness of an electronic device is its ability to resist water, fingerprints, dirt, and smudges that may compromise its ability to function and/or the information within it. Here, we report a chemical analysis by ToF‐SIMS, wetting, and XPS of the surfaces in a commercially available Apple iPod nano (8GB, MC525LL/A), which showed good resistance to its environment. This analysis reveals that the front panel (touchscreen) of the device is coated with a low free energy fluorinated polymer that may consist of short segments of a fluorinated hydrocarbon connected through ether linkages. No other part of the device appears to have this hydrophobic coating. A plasma treatment of the device leads to a deterioration of its performance. This work demonstrates how different analytical techniques can complement each other and contribute to a better understanding of a surface or a material. Copyright © 2013 John Wiley & Sons, Ltd.     

Electrical characterization of strontium tartrate single crystals

The a.c. and d.c. conductivity of SrC₄H₄O₆·3H₂O are measured and are found to lie between usual conductivities of semiconductor and insulator. Temperature dependence of d.c. conductivity shows intrinsic conduction, which is confirmed by the slope of versus data. Due to application of thermal energy, noticeable conductivity peaks imply liberation of water molecules during dehydration and the formation of strontium oxalate. The conductivity plot has a nature similar to the intrinsic-to-extrinsic transition found in normal semiconductors. There occurs Efros hopping conduction in our samples.     

A Minimal Triangulation of the Hopf Map and its Application

We give a minimal triangulation : S ₁₂ ³ S ₄ ² of the Hopf map h:S ³S ² and use it to obtain a new construction of the 9-vertex complex projective plane.     

Absence of morphotropic phase boundary effects in BiFeO<Subscript>3</Subscript>–PbTiO<Subscript>3</Subscript> thin films grown via a chemical multilayer deposition method

We report an unusual behavior observed in (BiFeO₃)_1−x –(PbTiO₃) _x (BF–xPT) thin films prepared using a multilayer chemical solution deposition method. Films of different compositions were grown by depositing several bilayers of BF and PT precursors of varying BF and PT layer thicknesses followed by heat treatment in air. X-ray diffraction showed that samples of all compositions show mixing of two compounds resulting in a single-phase mixture, also confirmed by transmission electron microscopy. In contrast to bulk compositions, samples show a monoclinic (M_A-type) structure suggesting disappearance of the morphotropic phase boundary (MPB) at x=0.30 as observed in the bulk. This is accompanied by the lack of any enhancement of the remanent polarization at the MPB, as shown by the ferroelectric measurements. Magnetic measurements showed an increase in the magnetization of the samples with increasing BF content. Significant magnetization in the samples indicates melting of spin spirals in the BF–xPT films, arising from a random distribution of iron atoms. Absence of Fe²⁺ ions was corroborated by X-ray photoelectron spectroscopy measurements. The results illustrate that thin film processing methodology significantly changes the structural evolution, in contrast to predictions from the equilibrium phase diagram, besides modifying the functional characteristics of the BP-xPT system dramatically.     

Gold nanoparticle-decorated keggin ions/TiO2 photococatalyst for improved solar light photocatalysis

We demonstrate a facile localized reduction approach to synthesizing a Au nanoparticle-decorated Keggin ion/TiO(2) photococatalyst for improved solar light photocatalysis application. This has been achieved by exploiting the ability of TiO(2)-bound Keggin ions to act as a UV-switchable, highly localized reducing agent. Notably, the approach proposed here does not lead to contamination of the resultant cocatalyst with free metal nanoparticles during aqueous solution-based synthesis. The study shows that for Keggin ions (phosphotungstic acid, PTA), being photoactive molecules, the presence of both Au nanoparticles and PTA on the TiO(2) surface in a cocatalytic system can have a dramatic effect on increasing the photocatalytic performance of the composite system, as opposed to a TiO(2) surface directly decorated with metal nanoparticles without a sandwiched PTA layer. The remarkable increase in the photocatalytic performance of these materials toward the degradation of a model organic Congo red dye correlates to an increase of 2.7-fold over that of anatase TiO(2) after adding Au to it and 4.3-fold after introducing PTA along with Au to it. The generalized localized reduction approach to preparing TiO(2)-PTA-Au cocatalysts reported here can be further extended to other similar systems, wherein a range of metal nanoparticles in the presence of different Keggin ions can be utilized. The composites reported here may have wide potential implications toward the degradation of organic species and solar cell applications.