Development of a method for recovery of 233U from thorium oxalate cake in reconversion step of reprocessing of irradiated thorium rods

A method is developed for the selective leaching of ²³³U from a thorium oxalate cake. The leaching capacity of ammonium carbonate and nitric acid have been investigated, showing that (NH₄)₂CO₃ leads to higher recovery. The maximum leaching efficiency is obtained using 0.5% ammonium carbonate, with a minimal thorium pick-up. A uranium recovery of 94% is obtained after three consecutive contact experiments in carbonate media, with minimal thorium uptake in the leachate. This process was applied to an actual plant stream, allowing the reduction of the ²³³U -activity from 5.64 to 0.3 Ci/g of thorium oxalate cake.     

Novel Carbon–Carbon Bond Formation between N‐Methyl‐3‐phenyl‐3‐hydroxypropylamine and Cresols Catalyzed by p‐Toluenesulphonic Acid

The p‐toluenesulphonic acid–catalyzed reaction between appropriate cresols and N‐methyl‐3‐phenyl‐3‐hydroxypropylamine in refluxing toluene resulted in the formation of o‐substituted phenol derivatives by an aromatic nucleophilic substitution reaction.     

Liquid crystal parameters through image analysis

A technique which combines image analysis and polarising optical microscope (POM) is a useful tool for the physical investigation of discotic liquid crystals, such as hexabutoxytriphenylene and hexahexyloxytriphenylene. This investigation includes the phase transitions, optical properties and order parameter as a function of temperature. Textures of discotic liquid crystals are captured as a function of temperature using POM. These microscopic textures are analysed using MATLAB software to compute statistical parameters, Legendre moments, optical parameters and order parameters of discotic liquid crystal samples. Compared with other techniques in the literature, the proposed methodology is a reliable and very simple technique for the physical investigation of liquid crystals.     

Optical properties of a mesogen by image analysis

An image analysis technique in conjunction with polarising optical microscopy (POM) is proposed for assessment of the thermo-optical properties of homogeneously aligned chiral ester liquid crystals of the type ((S)-(-)-2-methylbutyl 4′-(4″-n-alkanoyloxybenzoyloxy) biphenyl-4-carboxylates, where n?=?16 or 18. Chiral ester textures are recorded as a function of temperature using POM provided with a hot-stage and a high-resolution colour camera. Temperature-dependent optical parameters, or thermo-optical properties such as optical transmission, degree of polarisation, absorption coefficient and birefringence are computed for chiral esters by analysing the texture of samples using MATLAB software. This is a simple experimental technique for observing how the optical parameters of liquid crystals change with temperature.     

Drop calorimetric measurements on a versatile monazite phase loaded with simulated radioactive waste

Monazite is one of the candidate ceramic matrices for the immobilization of high level radioactive waste (HLW) from the reprocessing of spent nuclear fuel. The monazite phase, Ce_0.8Ca_0.2PO₄, can accommodate cations of different valences due to the mixed valence state (+3 and +4) of Ce in this compound, by facilitating the oxidation and reduction of the Ce³⁺ and Ce⁴⁺ as required by the in-coming cation. This will assist in accommodating HLW of different compositions in the monazite crystal structure even if the average valence of the HLW elements is other than 3. Therefore, the monazite phase, Ce_0.8Ca_0.2PO₄, can be a versatile host for the immobilization of HLW. The enthalpy increment and heat capacity of this versatile monazite phase and a simulated waste form based on it with 20 mass% HLW oxides were measured by drop calorimetry in the temperature range from 373 to 873 K, and the results are compared with those measured for CePO₄.     

Piezoelectric and pyroelectric properties of lead lanthanum zirconate titanate (PLZT) ceramics prepared by sol gel derived nano powders

Lanthanum modified PZT (PLZT) ceramics were prepared with nano powders obtained by the sol gel method and its piezoelectric and pyroelectric behaviour was studied. The piezoelectric properties of the sol gel derived ceramics were compared with the ones prepared by the conventional oxide route. It was found that although the figures of merit of the sol gel derived ones were slightly better (10–15% increase), because of its higher density with respect to conventional ones. The pyroelectric properties of PLZT needs special mention because of its high detectivity and low noise levels. The results are tabulated in the paper and it indicates great figures of merit.     

Spherical aberration and its correction using Lie algebraic methods

We discuss three methods to correct spherical aberration for a point to point imaging system. First, results obtained using Fermat’s principle and the ray tracing method are described briefly. Next, we obtain solutions using Lie algebraic techniques. Even though one cannot always obtain analytical results using this method, it is often more powerful than the first method. The result obtained with this approach is compared and found to agree with the exact result of the first method.     

Thermal expansion and heat capacity measurements on Ba10?xCsx(PO4)6Cl2?δ, (x?=?0, 0.5) chloroapatites synthesized by sonochemical process

Ba_10−x Cs _x (PO₄)₆Cl₂, (x = 0, 0.5) chloroapatite ceramics were prepared by sonochemical method of synthesis. The measured room temperature lattice parameters of Ba₁₀ (PO₄)₆Cl₂ and Ba_9.5Cs_0.5 (PO₄)₆Cl_2−δ are practically the same; that is, a = 10.26 (8), c = 7.65 (7) and a = 10.27 (7), c = 7.65 (5), respectively. Heat capacity measurements were carried out on these materials by differential scanning calorimetry (DSC) in the temperature range 298–800 K. The heat capacity values of Ba_9.5Cs_0.5(PO₄)₆Cl_2−δ are found to be slightly higher at all temperatures than those of Ba₁₀(PO₄)₆Cl₂. From the heat capacity data, other thermodynamic functions such as enthalpy and entropy increments were computed. The heat capacity values of Ba₁₀(PO₄)₆Cl₂ and Ba_9.5Cs_0.5(PO₄)₆Cl_2−δ at 298 K are 0.3912 and 0.4310 J K⁻¹ g⁻¹, respectively. Thermal expansion property of the doped and undoped barium chloroapatites was measured by using a home built dilatometer which uses LVDT as displacement sensor. The bulk thermal expansion of Ba₁₀(PO₄)Cl₂ and Ba_9.5Cs_0.5(PO₄)Cl_2−δ is observed to be about 0.9% in the temperature range of 298–973 K.