Vaporisation et dissociation thermique des sulfures de phosphore P4S3, P4S7 et P4S10 a l'etat gazeux

Résumé Nous avons montré par spectrométrie Raman à chaud et mesure des tensions de vapeur que P₄S₃ se vaporise de façon congruente tandis que P₄S₇ et P₄S₁₀ se dissocient dès le début de leur vaporisation. P₄S₇ donne réversiblement P₄S₃ et soufre. P₄S₁₀ se dissocie irréversiblement en P₄S₇ et soufre. A l'état de vapeur non saturante, P₄S₃ se dissocie au-dessus de 600° avec formation de phosphore, de soufre et d'autres espèces non identifiées.Nous avons mesuré expérimentalement la capacité calorifique de P₄S₃ liquide, calculé celle de P₄S₃ gazeux et son entropie standard. Nous avons aussi estimé l'enthalpie standard de vaporisation de P₄S₃ à l'aide des mesures des tensions de vapeur saturante. Nous en avons déduit l'entropie standard de P₄S₃ liquide et son point d'ébullition.

---

It is shown by Raman spectroscopy at high temperature and by vapor tensimetric measurements that the vaporisation of P₄S₃ is congruent, whereas P₄S₇ and P₄S₁₀ dissociate at the beginning of vaporisation. P₄S₇ gives P₄S₃ and sulfur reversibly. The dissociation of P₄S₁₀ into P₄S₇ and sulfur is irreversible. Above 600°, in non-saturated vapour the dissociation of P₄S₃ gives phosphorus, sulfur and some unidentified gaseous species. The heat capacity of liquid P₄S₃ has been measured. That of gaseous P₄S₃ and its standard entropy have been calculated. The vaporisation standard enthalpy of P₄S₃ has been estimated from the experimental results on the saturated vapour pressures. The standard entropy of liquid P₄S₃ and its boiling point have been derived from these data.

---

Zusammenfassung Mittels Raman-Spektrometrie bei erhöhter Temperatur und durch Messung der Dampfdrucke wurde festgestellt, daß sich P₄S₃ verflüchtigt, während P₄S₇ und P₄S₁₀ mit Beginn der Verflüchtigung dissoziieren. P₄S₇ ergibt reversibel P₄S₃ und Schwefel. Im Zustand ungesättigten Dampfes dissoziiert P₄S₃ oberhalb von 600° unter Bildung von Phosphor, Schwefel und anderer nicht identifizierter Substanzen.Die Wärmekapazität von flüssigem P₄S₃ wurde gemessen, während die vom gasförmigem P₄S₃ sowie seine Standard-Entropie berechnet wurden. Die Standard-Enthalpie der Verflüchtigung des P₄S₃ wurde durch Messungen der Sättigungs-Dampfdrucke ermittelt. Daraus wurden die Standard-Entropie des flüssigen P₄S₃ sowie sein Siedepunkt berechnet.

---

- - , P₄S₃ , P₄S₇ P₄S₁₀ . P₄S₇ P₄S₃ , P₄S₁₀ P₄S₇ . 600° P₄S₃ , . P₄S₃, P₄S₃ . P₄S₃. P₄S₃ .

---

---

Nous remercions Monsieur Letoffe du laboratoire du Professeur J. Bousquet, INSA de Lyon, 20 Avenue Albert Einstein 401, 69621 Villeurbanne, qui a r6alis6 pour nous les déterminations expérimentales des capacités calorifiques de P₄S₈ liquide.     

The thermodynamic properties of acetals+heptane mixtures at 298.15 K

Excess enthalpies and excess volumes were determined at 298.15 K for: dimethoxymethane+heptane, diethoxymethane+heptane, 1,1-dimethoxyethane+heptane, 1,1-diethoxyethane+heptane, 2,2-dimethoxypropane+heptane and 1,1-diethoxypropane+heptane.     

Etude de l'équilibre azido ⇌ tétrazole dans la séric du thiazolo[2,3-e]-tétrazole. III. Effects des substituants

The substituent effects on azido/tetrazole equilibrium on a series of 2-substituted thiazoles, benzothiazoles, thiadiazoles, benzoxazoles and isoxazoles has been studied by proton magnetic resonance in two solvents (DMSO-d₆ and deuteriochloroform). For thiazole an excellent Hammett relationship was found, both for the 4 and 5 positions.     

Ion cyclotron resonance studies of some reactions of C+ ions

Product distributions and rate constants for the reaction of ground state C⁺ ions with O₂, NO, HCl, CO₂, H₂S, H₂O, HCN, NH₃, CH₄, H₂CO, CH₃OH, and CH₃NH₂ have been measured. Rate constants were obtained using ion cyclotron resonance trapped ion methods at JPL, and product distributions were obtained using a tandem (Dempster-ICR) mass spectrometer at the University of Utah. Rapid carbon isotope exchange has also been observed in C⁺-CO collisions.     

Redox control of the P450cam catalytic cycle: effects of Y96F active site mutation and binding of a non-natural substrate

Spectroelectrochemistry measurements are used to demonstrate that active site mutation and binding of an non-natural substrate to P450cam (CYP101) reduces the shift in the redox potential caused by substrate-binding, and thereby results in slower catalytic turnover rate relative to wild-type enzyme with the natural camphor substrate.     

A SIFT ion-molecule study of some reactions in Titan's atmosphere. reactions of N(+), N(2)(+), and HCN(+) with CH(4), C(2)H(2), and C(2)H(4)

The results of a study of the ion-molecule reactions of N(+), N(2)(+), and HCN(+) with methane, acetylene, and ethylene are reported. These studies were performed using the FA-SIFT at the University of Canterbury. The reactions studied here are important to understanding the ion chemistry in Titan's atmosphere. N(+) and N(2)(+) are the primary ions formed by photo-ionization and electron impact in Titan's ionosphere and drive Titan's ion chemistry. It is therefore very important to know how these ions react with the principal trace neutral species in Titan's atmosphere: Methane, acetylene, and ethylene. While these reactions have been studied before the product channels have been difficult to define as several potential isobaric products make a definitive answer difficult. Mass overlap causes difficulties in making unambiguous species assignments in these systems. Two discriminators have been used in this study to resolve the mass overlap problem. They are deuterium labeling and also the differences in reactivities of each isobar with various neutral reactants. Several differences have been found from the products in previous work. The HCN(+) ion is important in both Titan's atmosphere and in the laboratory.     

Structural aspects of the metal-insulator transitions in V0.985Al0.015O2

The crystal structure of V_0.985Al_0.015O₂ has been refined from single-crystal X-ray data at four temperatures. At 373°K it has the tetragonal rutile structure. At 323°K, which is below the first metal-insulator transition, it has the monoclinic M₂ structure, where half of the vanadium atoms are paired with alternating short (2.540 Å) and long (3.261 Å) V-V separations. The other half of the vanadium atoms form equally spaced (2.935 Å) zigzag V chains. At 298°K, which is below the second electric and magnetic transition, V_0.985Al_0.015O₂ has the triclinic T structure where both vanadium chains contain V-V bonds, V(1)-V(1) = 2.547 Å and V(2)-V(2) = 2.819 Å. At 173°K the pairing of the V(1) chain remains constant: V(1)-V(1) = 2.545 Å, whereas that of the V(2) chain decreases: V(2)-V(2) = 2.747 Å. From the variation of the lattice parameters as a function of temperature it seems that these two short V-V distances will not become equal at lower temperatures. The effective charges as calculated from the bond strengths at 298 and 173°K show that a cation disproportionation has taken place between these two temperatures. About 20% of the V⁴⁺ cations of the V(1) chains have become V³⁺ and correspondingly 20% of the V⁴⁺ cations of the V(2) chains have become V⁵⁺. This disproportionation process would explain the difference between the two short V-V distances. Also it would explain why the T → M₁ transition does not take at lower temperatures.     

Poly(styrene-b-2-vinylpyridine-1-oxide) diblock copolymers: 3. Microemulsions in water/propan-2-ol/toluene mixtures

Pseudo-ternary phase diagrams have been constructed for the three-component solvent system (toluene+water+propan-2-ol) containing diblock copolymers of poly(styrene-b-2-vinylpyridine-1-oxide). Microemulsions have been shown to form on the water-rich side of the phase diagram, in the region of the phase boundary without polymer. Dynamic light-scattering experiments have led to droplet size values in the region of 100 nm, with the size depending strongly on the propan-2-ol/water concentration, as well as the amount of solubilised toluene in the core. Viscometry experiments have been carried out to measure polymer aggregation numbers in the microemulsion droplets, and interfacial tension measurements have shown that in the absence of propan-2-ol (effectively a cosurfactant) the limiting value of the oil/water interfacial tension, even an saturation adsorption of the copolymer is 20 mNm^–1. However, addition of propan-2-ol reduces the interfacial tension to the very low values generall commensurate with microemulsion formation.     

Dipolare (1:1)-Addukte aus der Reaktion von 3-Amino-2H-azirinen mit 1,3,4-Oxadiazol- und 1,3,4-Thiadiazol-2(3H)-onen

Dipolar 1:1 Adducts from the Reaction of 3-Amino-2H-azirines with 1,3,4-Oxadiazol- and 1,3,4-Thiadiazol-2(3H)-ones 3-Amino-2H-azirines 1 react with 5-(trifluoromethyl)-1,3,4-oxadiazol-2(3H)-one ( 2 ) as well as with different 5-substituted 1,3,4-thiadiazol-2(3H)-ones ( 5a–e ) in 2-propanol at room temperature to give dipolar 1:1 adducts of type 3 and 6 , respectively, in reasonable-to-good yields (Schemes 3 and 6, Tab. 1 and 2). The structure of two of these dipolar adducts, 6a and 6e , which are formally donor-acceptor-stabilized azomethin imines, have been elucidated by X-ray crystallography (Figs. 1-4). In the reaction of 2 and sterically crowded 3-amino-2H-azirines 1c–e with a 2-propyl and 2-propenyl substituent, respectively, at C(2), a 4,5-dihydro-1,2,4-triazin-3(2H)-one of type 4 is formed as minor product (Scheme 3 and Table 1). Independent syntheses of these products proved the structure of 4 . Several reaction mechanisms for the formation of compounds 3 and 4 are discussed, the most likely ones are described in Scheme 4: reaction of 2 as an NH-acidic compound leads, via a bicyclic zwitterion of type A , to 3 as well as to 4 . In the latter reaction, a ring-expanded intermediate B is most probable.     

Functional Bacterial Amyloids: Understanding Fibrillation,Regulating Biofilm Fibril Formation and Organizing Surface Assemblies

Functional amyloid is produced by many organisms but is particularly well understood in bacteria, where proteins such as CsgA (E. coli) and FapC (Pseudomonas) are assembled as functional bacterial amyloid (FuBA) on the cell surface in a carefully optimized process. Besides a host of helper proteins, FuBA formation is aided by multiple imperfect repeats which stabilize amyloid and streamline the aggregation mechanism to a fast-track assembly dominated by primary nucleation. These repeats, which are found in variable numbers in Pseudomonas, are most likely the structural core of the fibrils, though we still lack experimental data to determine whether the repeats give rise to β-helix structures via stacked β-hairpins (highly likely for CsgA) or more complicated arrangements (possibly the case for FapC). The response of FuBA fibrillation to denaturants suggests that nucleation and elongation involve equal amounts of folding, but protein chaperones preferentially target nucleation for effective inhibition. Smart peptides can be designed based on these imperfect repeats and modified with various flanking sequences to divert aggregation to less stable structures, leading to a reduction in biofilm formation. Small molecules such as EGCG can also divert FuBA to less organized structures, such as partially-folded oligomeric species, with the same detrimental effect on biofilm. Finally, the strong tendency of FuBA to self-assemble can lead to the formation of very regular two-dimensional amyloid films on structured surfaces such as graphite, which strongly implies future use in biosensors or other nanobiomaterials. In summary, the properties of functional amyloid are a much-needed corrective to the unfortunate association of amyloid with neurodegenerative disease and a testimony to nature’s ability to get the best out of a protein fold.