Laser induced air breakdown using 0.355, 0.532, and 1.06 µm radiation

Studies of breakdown threshold intensity for air at various pressures in the range of 24–760 torr using 0.355, 0.532 and 1.06 μm radiation are reported. We observep ^−0.8 scaling ofI _th at 1.06 μm and a weak scaling ofp ^−0.4 at 0.532 and 0.355 μm radiation. Strong dependence of breakdown spot size on laser power but weak dependence on air pressure is observed.     

Dielectric studies of binary mixtures of n -propyl alcohol and ethylenediamine

Dielectric constant (ε’) and dielectric loss (ε") of n-propyl alcohol (PA), ethylenediamine (EDA) and their binary mixtures, for different mole fractions of ethylenediamine have been experimentally measured at 11.15 GHz microwave frequency. Values of density (ρ), viscosity (η) and square refractive index (n _D ² ) of binary mixtures as well as those of pure liquids are reported. Excess square refractive index, viscosity and activation energy of viscous flow have also been estimated. These parameters have been used to explain the formation of complexes in the system.     

Pressure induced phase transitions in hydroquinone

High pressure behavior of alpha-hydroquinone (1,4-dihydroxybenzene) has been studied using Raman spectroscopy up to pressures of 19 GPa. Evolution of Raman spectra suggests two transitions around 3.3 and 12.0 GPa. The first transition appears to be associated with the lowering of crystal symmetry. Above 12.0 GPa, Raman bands in the internal modes region exhibit continuous broadening suggesting that the system is progressively evolving into a disordered state. This disorder is understood as arising due to distortion of the hydrogen-bonded cage across the second transition around 12 GPa.     

Novel solid-phase extraction and preconcentration technique coupled with ICP-AES for the determination of Cr(III), Ni(II), and Zn(II) in various water samples

Newly synthesized 2-propylpiperidine-1-carbodithioate (2-PPC) was used for the extraction of Cr(III), Ni(II), and Zn(II) from various water samples. In the present investigation, the use of a syringe loaded with sorbent for the separation and enrichment of Cr(III), Ni(II), and Zn(II) prior to their determination by inductively coupled plasma-atomic emission spectrometry (ICP-AES) was proposed to substitute the batch and column techniques. The described method was compared with the column technique with respect to fastness, simplicity, recovery, and risk of contamination. The syringe was loaded with 1.0 g of sorbent in order to retain the analyte elements. Next, 7.0 mL of sample solution (pH 5.0 ± 0.2) was drawn into the syringe in 15 s and discharged over 15 s. Then, an eluent (3.0 M HCl) was drawn into the syringe and ejected back to desorb the analyte elements. At the optimum conditions, the percentage recoveries of Cr(III), Ni(II), and Zn(II) were in the range of 94.50 to 99.62% with a standard deviation (S.D.) of 0.03%. The elements could be concentrated by drawing and discharging several portions of sample successively and eluting only one time. The detailed study of various interferences proved the method to be highly selective. The risk of contamination is less than that with the column technique. The method was successfully applied to the determination of Cr(III), Ni(II), and Zn(II) in spiked and natural water samples. The results obtained are in good agreement with those obtained by the reported methods at the 95% confidence level. The text was submitted by the authors in English.     

Facile and Sensitive Spectrophotometric Determination of Propoxur in Formulations and Environmental Samples

A facile, rapid, and sensitive spectrophotometric method for the determination of propoxur in insecticidal formulations, fortified water, vegetables, agricultural wastewater, and agricultural soil samples has been elaborated. The proposed method is based on the hydrolysis of propoxur under basic conditions, followed by instantaneous azo coupling of the resulting 2‐isopropoxyphenol with the anilines 2a – c . This yielded the orange‐red chromophore 3a (λ_max=at 470 nm), the pale‐red coupling product 3b (490 nm), or the red derivative 3c (478 nm), which are stable for 46 h, 38 h, and 24 h, respectively, and could be readily analyzed spectrophotometrically.     

Reductive Amination of Aldehydes and Ketones with Sodium Triacetoxyborohydride. Studies on Direct and Indirect Reductive Amination Procedures(1)

Sodium triacetoxyborohydride is presented as a general reducing agent for the reductive amination of aldehydes and ketones. Procedures for using this mild and selective reagent have been developed for a wide variety of substrates. The scope of the reaction includes aliphatic acyclic and cyclic ketones, aliphatic and aromatic aldehydes, and primary and secondary amines including a variety of weakly basic and nonbasic amines. Limitations include reactions with aromatic and unsaturated ketones and some sterically hindered ketones and amines. 1,2-Dichloroethane (DCE) is the preferred reaction solvent, but reactions can also be carried out in tetrahydrofuran (THF) and occasionally in acetonitrile. Acetic acid may be used as catalyst with ketone reactions, but it is generally not needed with aldehydes. The procedure is carried out effectively in the presence of acid sensitive functional groups such as acetals and ketals; it can also be carried out in the presence of reducible functional groups such as C-C multiple bonds and cyano and nitro groups. Reactions are generally faster in DCE than in THF, and in both solvents, reactions are faster in the presence of AcOH. In comparison with other reductive amination procedures such as NaBH(3)CN/MeOH, borane-pyridine, and catalytic hydrogenation, NaBH(OAc)(3) gave consistently higher yields and fewer side products. In the reductive amination of some aldehydes with primary amines where dialkylation is a problem we adopted a stepwise procedure involving imine formation in MeOH followed by reduction with NaBH(4).     

Spectrophotometric determination of traces of selenium(IV) in various environmental samples using the flow-injection technique (FIT)

A simple, sensitive, and rapid flow-injection spectrophotometric method was developed for the determination of trace amounts of selenium(IV). The method is based on the oxidation reaction of 3-methyl-2-benzothiazolinone hydrazone hydrochloride (MBTH) by selenium(IV) followed by the coupling reaction with chromotropic acid (4.5-dihydroxy naphthalene-2.7-disulphonic acid) in a basic medium (phosphate buffer, pH 10.5) to give a pink derivative with λ_max 530 nm that is stable for more than 7 days at 35°C. The reaction and flow conditions of the full experimental design were optimized. A detection limit (2s) of 0.25 μg/L Se(IV) was obtained at a sampling rate of 10 samples per hour. Beer’s law is obeyed for a Se(IV) concentration range of 0.05–0.5 μg/mL at the wavelength of maximum absorption. The detailed study of various interference ions indicates that the method is highly selective. The method was successfully applied to the determination of traces of selenium(IV) in various water samples. The results obtained were in good agreement with those obtained by the reported methods at the 95% confidence level. The text was submitted by the authors in English.     

Determination of rhodium in water samples using cloud point extraction (CPE) coupled with flame atomic absorption spectrometry (FAAS)

Cloud point extraction was applied as a method for preconcentration of rhodium after formation of a complex with 2-propylpiperidine-1-carbodithioate (2-PPC), and later determined by flame atomic absorption spectrometry using TritonX-114 as surfactant. Rhodium was complexed with 2-PPC in an aqueous phase and kept for 15 min in a thermostatted bath at 40 °C. Separation of the two phases was accomplished by centrifugation for 15 min at 4000 rpm. The chemical variables affecting the cloud point extraction were optimized and successfully applied to rhodium determination in various water samples. Under optimized conditions, the preconcentration system (100 mL sample) permitted an enhancement factor of 50. The detection limits obtained under optimal conditions was 0.052 ng mL⁻¹. The extraction efficiency was investigated at different rhodium concentrations (7.0–42.0 μg mL⁻¹), and good recoveries (96.42–99.14%) were obtained using this method. It has been applied to the determination of rhodium in water and was compared with reported methods in terms of Student’s ‘t’-test and variance ratio ‘f’-test.     

Salmonella in foods: new enrichment procedure for TECRA Salmonella Visual Immunoassay using a single rv(R10) only, TT only, or dual rv(R10) and TT selective enrichment broths (AOAC official method 998.09): collaborative study

A collaborative study was conducted to compare a new enrichment procedure for the TECRA Salmonella Visual Immunoassay (TSVIA) with the reference method given in the U.S. Food and Drug Administration's Bacteriological Analytical Manual (7th Ed.). Three food types (milk powder, pepper, and soy flour) were analyzed in Australia and 3 food types (milk chocolate, dried egg, and raw turkey) were analyzed in the United States. Thirty-eight collaborators participated in the study. The TECRA method was evaluated using both Rappaport-Vassiliadis R10 (RV(R10)) and tetrathionate (TT) broths for selective enrichment. M broth cultures arising from each of the 2 selective enrichment broths were tested in the TSVIA using 2 individual wells, one for each selective broth, and a single well to test the pooled selective enrichment broths. The results for the pooled enrichment broths were reported elsewhere. This study presents the results for the use of single enrichment broths, i.e., RV(R10) only or TT only, with the TSVIA. No significant differences (p > 0.05) were observed for the pairwise comparison of the proportion of positive samples for either RV(R10) or TT used as a single enrichment broth for the TSVIA with that for the reference method.