Beta zeolite colloidal nanocrystals supported on mesoporous MCM-41

Zeolite-based composite materials prepared by the embedding of the beta zeolite nanophase from aqueous colloidal solution into matrices of preformed Si(Al)MCM-41 mesoporous molecular sieves have been characterized by different methods (XRD, SEM, FTIR, N2 adsorption, and TPD of NH3). Their potential as catalysts for toluene disproportionation has been compared to mechanical mixtures of freeze-dried nanobeta crystallites with Si(Al)MCM-41 mesoporous materials. It is found that the zeolite catalyst efficiency is not substantially changed by the presence of mesopores belonging to the matrix. It is suggested that formation of intergrown aggregates from the colloidal nanobeta particles provides own highly developed textural mesoporosity that makes the contribution of the diffusional alleviation of the support negligible.     

Toluene disproportionation and coking on zeolites Y modified with Lewis-connected InO acid sites

The effect of introduction of Lewis acid sites on the reactions of toluene transformation and catalysts coking has been studied over parent (Si/Al = 2.5) and dealuminated (Si/Al = 3.7) Y zeolites modified with Lewis connected InO⁺ cationic acid sites. The catalysts with prevalent amount of Brönsted acid sites (less than 40% of protons exchanged by InO⁺) possess the typical for the proton directed reaction of methyl transfer upon toluene disproportionation long period of activation, the longer the higher the concentration of bridging protons. In contrast, at predominant Lewis sites concentration, the activation period disappear, an enhanced initial activity is observed, followed by deactivation on the expense of a rapid process of accumulation of strongly held reaction products and intermediates. Their further condensation leads to catalysts aging, the faster the higher the concentration of electron acceptor Lewis acid sites. A relation has been found between the initially accelerated processes of alkyl transfer and the reinforced formation of carbonaceous deposits over the In-modified catalysts.     

Nickel-containing MCM-41 materials, influence of the preparation procedures on the catalytic activity in toluene hydrogenation

Summary  Vezetéknév     

DFT study of hydrazone-based molecular switches: the effect of different stators on the on/off state distribution

ABSTRACT

Hydrazones are popular building blocks in the development of functional materials because of their simple structure, straightforward synthesis, hydrolytic stability and tunable properties. Although a significant body of experimental information has been accumulated on the hydrazone-based rotary switches, mechanistic studies are still scarce. The effect of different stator units (phenyl-, naphthyl- and quinolinyl) on the on/off state distribution is studied in details at various computational levels in order to select a reliable computational level for a further computational study of the switching mechanism and rotary action of these systems.     

Comparative study of activity of H+ form of type y,mordenite, and ZSM-5 zeolites in toluene disproportionation reaction

Conclusions Important differences were established in the selectivity and stability of three types of zeolites (HY, HM, and HZSM) in the toluene disproportionation reaction at 450–500°. The high stability of the ultrahigh silica zeolite ZSM-5 specimen is explained by the characteristics of its structure.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 5, pp. 1168–1171, May, 1982.     

Seven-coordinate iron complex as a ditopic receptor for lithium salts: study of host-guest interactions and substitution behavior

Interactions between the seven-coordinate tweezerlike [Fe(dapsox)(H2O)2]ClO4 complex (H2dapsox = 2,6-diacetylpyridine-bis(semioxamazide)) with different lithium salts (LiOTf, LiClO4, LiBF4, and LiPF6) in CH3CN have been investigated by electrochemical, spectrophotometric, 7Li and 19F NMR, kinetic, and DFT methods. It has been demonstrated that this complex acts as ditopic receptor, showing spectral and electrochemical ion-pair-sensing capability for different lithium salts. In general, the apparent binding constants for lithium salts increase in the order LiOTf < LiClO4 < LiBF4. From the electrochemical measurements, the apparent lithium salt binding constants for the Fe(III) and Fe(II) forms of the complex have been obtained, suggesting a stronger host-guest interaction with the reduced form of the complex. In the presence of LiPF6, the solution chemistry is more complex because of the hydrolysis of PF6-. The kinetics of the complexation of [Fe(dapsox)(CH3CN)2]+ by thiocyanate at -15 degrees C in acetonitrile in the presence of 0.2 M NBu4OTf shows two steps with the following rate constants and activation parameters: k(1) = 411 +/- 14 M(-1) s(-1); DeltaH(1) not equal = 9 +/- 2 kJ mol(-1); DeltaS1 not equal = -159 +/- 6 J K(-1) mol(-1); k(2) = 52 +/- 1 M(-1) s(-1); DeltaH(2) not equal = 4 +/- 1 kJ mol(-1); DeltaS(2) not equal = -195 +/- 3 J K(-1) mol(-1). The very negative DeltaS not equal values are consistent with an associative (A) mechanism. Under the same conditions but with 0.2 M LiOTf, k1Li and k2Li are 1605 +/- 51 and 106 +/- 2 M(-1) s(-1), respectively. The increased rate constants for the {[Fe(dapsox)(CH3CN)2] x LiOTf}+ adduct are in agreement with an associative mechanism. Kinetic and spectrophotometric titration measurements show stronger interaction between the lithium salt and the anion-substituted forms, [Fe(dapsox)(CH3CN)(NCS)] and [Fe(dapsox)(NCS)2]-, of the complex. These experiments demonstrate that in nonaqueous media lithium salts cannot be simply used as supporting electrolytes, since they can affect the kinetic behavior of the studied complex. DFT calculations revealed that the negatively charged alpha-oxyazine oxygen atoms are responsible for cation binding (electrostatic interactions), whereas the two terminal amide groups bind the anion via hydrogen bonding.     

Direct identification of bacteria in blood culture by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry: a new methodological approach

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) has recently been demonstrated to be a powerful tool for the rapid identification of bacteria from growing colonies. In order to speed up the identification of bacteria, several authors have evaluated the usefulness of this MALDI-TOF MS technology for the direct and quick identification bacteria from positive blood cultures. The results obtained so far have been encouraging but have also shown some limitations, mainly related to the bacterial growth and to the presence of interference substances belonging to the blood cultures. In this paper, we present a new methodological approach that we have developed to overcome these limitations, based mainly on an enrichment of the sample into a growing medium before the extraction process, prior to mass spectrometric analysis. The proposed method shows important advantages for the identification of bacterial strains, yielding an increased identification score, which gives higher confidence in the results.     

Infrared-spectroscopic detection and distinction of indium cations of different oxidation states in zeolites

In⁺ cations introduced by reductive solid-state ion exchange into zeolites (Y, ZSM-5, mordenite) and cationic InO⁺ species created by oxidation of the incorporated univalent cations were found to be detectable and distinguishable by IR spectroscopy using pyridine as probe molecule. Relatively weak interactions of In⁺ lattice cations with pyridine give rise, after degassing at temperatures not higher than 370 K, to typical bands at 1446 and 1599 cm⁻¹. After oxidation to InO⁺, these bands are shifted to 1452 and 1610 cm⁻¹, being significantly more resistant towards degassing. Because of restrictions in the accessibility of InO⁺ to pyridine, the respective bands are absent in the spectra of mordenite.     

High energy ion irradiation-induced ordered macropores in zeolite crystals

The present study demonstrated the possibility to form a secondary system of parallel macropores in zeolite crystals. The secondary pore formation was predetermined by the creation of defect zones in ZSM-5 crystals. A high energy (238)U ion beam was employed to form latent tracks in zeolite crystals, which were further subjected to attack with diluted HF solution and thus developed to uniformally sized macropores. The selective extraction of material from latent tracks was due to the higher etching velocity of highly agitated zones created by heavy ion bombardment. The combination of complementary methods unambiguously demonstrated the formation of hierarchical zeolite material comprising parallel macropores that extended through the entire crystal. The catalytic tests revealed improved activity at retained selectivity in the reaction of m-xylene conversion. The possibility to control the number of macropores per unit of crystal surface and thus the catalytic performance of the material was demonstrated. This model material is expected to bring better understanding to the effect of a secondary pore system in the catalytic performance of hierarchical zeolites obtained by the top-down or bottom-up approach.     

Effect of the preparation conditions of Ni-supported shock-wave synthesized nanodiamond catalysts: FT-IR and catalytic considerations

On the basis of the results from the FT-IR, XRD and catalytic studies, a suggestion about the mechanism of surface transformations of Ni-supported detonation-synthesized ultradispersed diamond and the influence of these transformations on the state of the loaded metal have been made. It was proposed that in dependence on the inert or oxidative atmosphere applied for the elimination of the Ni salt precursor, different interactions of the support with the NiO species have taken place that determined the way of their coordination and stability as well as the dispersion of the metal nickel phase formed upon their reduction. The catalytic activity of the latter has been tested in the reaction of toluene hydrogenation.