Group additive values for the gas phase standard enthalpy of formation of hydrocarbons and hydrocarbon radicals

A complete and consistent set of 95 Benson group additive values (GAV) for the standard enthalpy of formation of hydrocarbons and hydrocarbon radicals at 298 K and 1 bar is derived from an extensive and accurate database of 233 ab initio standard enthalpies of formation, calculated at the CBS-QB3 level of theory. The accuracy of the database was further improved by adding newly determined bond additive corrections (BAC) to the CBS-QB3 enthalpies. The mean absolute deviation (MAD) for a training set of 51 hydrocarbons is better than 2 kJ mol(-1). GAVs for 16 hydrocarbon groups, i.e., C(C(d))(3)(C), C-(C(d))(4), C-(C(t))(C(d))(C)(2), C-(C(t))(C(d))(2)(C), C-(C(t))(C(d))(3), C-(C(t))(2)(C)(2), C-(C(t))(2)(C(d))(C), C-(C(t))(2)(C(d))(2), C-(C(t))(3)(C), C-(C(t))(3)(C(d)), C-(C(t))(4), C-(C(b))(C(d))(C)(H), C-(C(b))(C(t))(H)(2), C-(C(b))(C(t))(C)(H), C-(C(b))(C(t))(C)(2), C(d)-(C(b))(C(t)), for 25 hydrocarbon radical groups, and several ring strain corrections (RSC) are determined for the first time. The new parameters significantly extend the applicability of Benson's group additivity method. The extensive database allowed an evaluation of previously proposed methods to account for non-next-nearest neighbor interactions (NNI). Here, a novel consistent scheme is proposed to account for NNIs in radicals. In addition, hydrogen bond increments (HBI) are determined for the calculation of radical standard enthalpies of formation. In particular for resonance stabilized radicals, the HBI method provides an improvement over Benson's group additivity method.     

Speciation analysis of tellurium by solid-phase extraction in the presence of ammonium pyrrolidine dithiocarbamate and inductively coupled plasma mass spectrometry

Under acidic conditions tellurium(IV) formed a complex with ammonium pyrrolidine dithiocarbamate (APDC). The tellurium(IV) complex was completely retained on a non-polar Isolute silica-based octadecyl (C(18)) sorbent-containing solid-phase extraction (SPE) cartridge, while the uncomplexed Te(VI) passed through the cartridge and remained as a free species in the solution. Only partial Te(IV) was retained on the SPE cartridge for samples without addition of APDC. On the basis of different retention behaviours of the complexed Te(IV) and uncomplexed Te(VI), a simple and highly sensitive method is proposed for the determination of total tellurium and Te(VI) by SPE separation and inductively coupled plasma mass spectrometry (ICP-MS) detection. The Te(IV) concentration was calculated as the difference between total tellurium and Te(VI) concentrations. The detection limit (3 sigma) is 3 ng L(-1) tellurium. Factors affecting the separation and detection of tellurium species were investigated. Coexisting ions did not show significant interferences with the Te(IV)-APDC complex retention and the subsequent ICP-MS detection of Te. The method has been successfully applied to the tellurium speciation analysis in waters with spiked recoveries for Te(IV) and Te(VI) of 86.0-108% and 87.1-97.4%, respectively.     

Enhanced fluorescence from o-phthalaldehyde and fluorescamine fluorophores using Triton and β-cyclodextrin

Mexiletine— and lysine hydrochloride—o-phthalaldehyde and mexiletine hydrochloride—, cysteine—, cysteamine—, homocysteine— and lysine hydrochloride—fluorescamine derivatives were subjected to Triton and β-cyclodextrin enhancement treatments. Of several classical fluorescence-enhancing reagents tested (Triton, β-cyclodextrin, sodium dodecyl sulphate, Brij), Triton provided the best results, followed by β-cyclodextrin. Increases in fluorescence emission by a factor of up to about 10 (mexiletine—fluorescamine—Triton X-100) were observed, with a generally negligible influence of the enhancing reagents on the excitation and emission maxima. Fluorescence enhancement by the addition of a suitable reagent solution to the final analyte solution may, in specific instances, enhance the detectability of native or chemically induced fluorophores.     

Antimony speciation by inductively coupled plasma mass spectrometry using solid phase extraction cartridges

A novel and simple method for inorganic antimony speciation is described based on selective solid phase extraction (SPE) separation of antimony(III) and highly sensitive inductively coupled plasma mass spectrometric (ICP-MS) detection of total antimony and antimony(V) in the aqueous phase of the sample. Non-polar SPE cartridges, such as the Isolute silica-based octyl (C8) sorbent-containing cartridge, selectively retained the Sb(III) complex with ammonium pyrrolidine dithiocarbamate (APDC), while the uncomplexed Sb(V) remained as a free species in the solution and passed through the cartridge. The Sb(III) concentration was calculated as the difference between total antimony and Sb(V) concentrations. The detection limit was 1 ng L(-1) antimony. Factors affecting the separation and detection of antimony species were investigated. Acidification of samples led to partial or complete retention of Sb(V) on C8 cartridge. Foreign ions tending to complex with Sb(III) or APDC did not interfere with the retention behavior of the Sb(III)-APDC complex. This method has been successfully applied to antimony speciation of various types of water samples.     

Electrochemically generated super-hydrophilic surfaces

The control of surface wettability of indium tin oxide (In2O3-SnO2) coated glass surfaces is studied. We report here the first observation of purely electrochemical generation of super-hydrophilic surfaces at In2O3-SnO2 electrodes in the absence of an ultraviolet illumination source. This is achieved by the application of high anodic potentials for a prolonged period. Such surfaces are reversibly converted back to their original hydrophobic state on storage in air (one or two days) or water (a week)(and vice versa). The unique character of these surfaces can be attributed to the surface structure of the hydrophilic phase.     

Lamination method for the study of interfaces in polymeric thin film transistors

A method for the fabrication of polymeric thin-film transistors (TFTs) by lamination is described. Poly(dimethylsiloxane) stamps were used to delaminate thin films of semiconducting polymers from silicon wafers coated with a self-assembled monolayer (SAM) formed from octyltrichlorosilane. These supported films were laminated onto electrode structures to form coplanar TFTs. The fabrication process was used to make TFTs with poly(3-hexylthiophene), P3HT, and poly[5,5'-bis(3-dodecyl-2-thienyl)-2,2'-bithiophene], PQT-12. TFTs, where these polymers were laminated onto gate dielectrics coated with SAMs from octyltrichlorosilane, had effective field-effect mobilities of 0.03 and 0.005 cm2/(V s), respectively. TFTs where PQT-12 was laminated onto gate dielectrics that were not coated with a SAM also had mobility of 0.03 cm2/(V s). In contrast, TFTs fabricated by spin-coating PQT-12 onto the same structure had mobilities ranging from 10-3 to 10-4 cm2/(V s). These results suggest that the lower mobilities of polymer TFTs made with hydrophilic gate dielectrics are caused by molecular ordering in the semiconducting film rather than electronic effects of dipolar groups at the interface.     

Continuous flow and flow injection stripping voltammetric determination of silver(I), mercury(II), and bismuth(III) at a bulk modified graphite tube electrode

The epoxy-impregnated graphite tube electrode bulk modified with 2-mercaptobenzoxazole, employed in a wall-jet configuration, was found to be useful for the continuous flow and flow injection stripping voltammetric determinations of Ag^I, Hg^II and Bi^III. For continuous flow, detection limits for Ag^I, Hg^II and Bi^III were 1.8 × 10⁻¹⁰ M, 1.9 × 10⁻⁹ M and 9.5 × 10⁻⁹ M, respectively (10 min accumulation, S/N = 3). Precisions for 5.00 × 10⁻⁹ M Ag^I, 1.00 × 10⁻⁸ M Hg^II and 1.00 × 10⁻⁷ M Bi^III were 10.5%, 5.77 % and 7.90% (relative standard deviations, n = 6), respectively. In the case of flow injection stripping, with a 500 μL injection loop, detection limits of 0.59 ng, 2.0 ng and 120 ng were obtained for Ag^I, Hg^II and Bi^III, respectively (S/N = 3). Selected metal ions, inorganic and organic substances were investigated for interferences. The electrode was tested with a certified sample and then applied to the determinations of the metal ions in a urine and a sea-water sample.     

Site-specific phenylation of pyridine catalyzed by phosphido-bridged ruthenium dimer complexes: a prototype for C-H arylation of electron-deficient heteroarenes

Direct and selective catalytic arylation of alpha-C-H bond in pyridine with iodobenzene was achieved in up to 70% yield. Phosphido-bridged bisruthenium complexes 6a and 6b arising from Ru3(CO)12 and PPh3 were identified as active catalysts. The formation of complexes 6a and 6b was investigated, a sequence of C-H and C-P bond cleavage, cluster fragmentation, and disproportionation was established, and the intermediate ruthenium complexes lying on this pathway were isolated and fully characterized.     

Selective C-arylation of free (NH)-heteroarenes via catalytic C-H bond functionalization

A new system for palladium-catalyzed arylation of a broad spectrum of free (NH)-heteroarenes has been developed (indole, pyrrole, pyrazole, 2-phenylimidazole, imidazole, benzimidazole, and purine). Remarkable selectivity has been achieved in the presence of MgO base, providing single C-arylation products, while no N-arylation and no bis-arylation products have been detected. In the case of free imidazole, exclusive C-4 arylation may be switched to exclusive 2-arylation by the addition of CuI to the Pd/Ph3P/MgO system. When free aryl-(NH)-azoles are desired, direct arylation eliminates three steps in comparison to standard methods, including N-protection, stoichiometric metalation or halogenation, and N-deprotection.