Characterization of Carbohydrates in Paper and Paper Pulps Using Anion Exchange Chromatography and Principal Component Analysis

In the course of this investigation, a method for the characterization and differentiation of paper pulps was developed. After hydrolyzation of the papers and the respective raw pulps with trifluoroacetic acid, the hydrolyzates were analyzed with respect to their carbohydrate composition using ion exchange chromatography. The variations in carbohydrate composition mainly arise from the various hemicelluloses of the papers and pulps. The chromatographic results were then further processed using principal component analysis which allows correlating the various papers to different pulp materials.     

Dynamics and energetics of the self-assembly of a hydrophobically modified polyelectrolyte: Naphthalene-labeled poly(acrylic acid)

Steady-state and time-resolved fluorescence studies were performed on aqueous solutions of poly(acrylic acid) hydrophobically modified with two very different levels of naphthalene (Np). It is demonstrated that unique information on association phenomena involving hydrophobe-modifed polymers can be obtained from an extended fluorescence study by using data for a less-modified polymer as a reference. For the more highly modified polymer, the presence of excited-state (as well as ground-state) dimers in addition to monomer emission due to locally excited naphthalene gives evidence for hydrophobic association between naphthalene groups. This association becomes, as expected, much less important at higher pH due to the electrostatic repulsion between different chain segments. However, it is noted that even at high pH there is a significant self-association. The coexistence of static and dynamic quenching phenomena of the Np monomer label was also revealed in the time-resolved fluorescence data. The data are compatible with the existence of two types of monomers and one excimer and suggest that the essential contribution to the monomer emission comes from isolated chromophores, whereas excimer formation arises from both a dynamic route (excited Np chromophores able to produce a dynamic excimer) and a static route (excitation of ground-state Np dimers). At room temperature, the dissociative reaction, excimer-to-monomer, can be neglected, and thus the rate constant for excimer formation and decay could be obtained with and without considering the influence of preformed dimers. Temperature has shown to induce different behavior in the polymer photophysics. In the case of the less-labeled polymer, the decays were found to be single-exponential with the fluorescence lifetime decreasing with increasing temperature. From the temperature dependence of the steady-state fluorescence data, the activation energy for excimer formation and the binding energy of the excimer were evaluated at different pH values, through the Stevens-Ban-type plots of the excimer-to-monomer intensity ratio. With the time-resolved data, measured in the temperature range of 5-60 degrees C, it was possible to extract the intrinsic activation energies for excimer formation. The thermodynamic driving force for the intrapolymeric association was found to be dependent on a balance between hydrophobic and electrostatic interactions, which are dependent on the pH, temperature, and hydrophobic content of the polymer.     

Classification of the CD. Spectra of carotenoids

The CD. spectra of carotenoids in the 220-500 nm region may by inspection be classified as (a) essentially Conservative, (b) intermediate, or (c) essentially nonconservative. A conservative spectrum shows in that spectral region a sequence of 5-6 relatively sharp Cotton effects of alternating sign, the rotatory strengths of which roughly add to zero. In a non-conservative spectrum Δ? has the same sign over the whole region and its absolute value is in general somewhat smaller. In general, typical conservative spectra invert upon isomerization of the molecule from all-trans to mono-cis. Non-conservative spectra do not invert. The model of a chiral polyene of the length of the conjugated carotene chromophore reproduces well the main features of the conservative spectra. The theoretical predictions and the experimental data are shown to conform to the C₂-rule [43] [44]. The particular nature of the longest-wavelength transition is interpreted. Based on a summary of the chiroptic data on about 50 naturally occurring compounds, the question is discussed of when conservative spectra arise and when not.     

Two-phase titration of organic ammonium ions with lauryl sulphate and methyl yellow as indicator

Conditions for determination of quaternary ammonium compounds and amines by two-phase titration have been calculated on the basis of extraction constants for the ion-pairs between the titrant (lauryl sulphate), the indicator (Methyl Yellow) and the sample. Methods for determination of extraction constants are presented. The precision and selectivity of the method are demonstrated by titrations of ammonium ions with different structures and degrees of substitution. The results are in agreement with the theoretical calculations.     

Strong Attraction of Caffeine to the Mercurous Dumbbell in the Salt [Hg2(Caf)2](ClO4)2(H2O)2

Colourless single crystals of the caffeine adduct of mercurous perchlorate dihydrate, [Hg₂(Caf)₂](ClO₄)₂(H₂O)₂, were grown from aqueous solutions of mercurous perchlorate and caffeine by isothermal evaporation at ambient temperature. The crystal structure (monoclinic, P2₁/n, Z = 4, a = 1628.0(2), b = 780.4(1), c = 2229.6(3) pm, β = 99.84(1)°, R₁(all data) = 0.0894) contains [trans‐Caf‐Hg‐Hg‐Caf]²⁺ cations with a Hg‐Hg distance of 250.88(6) pm, Hg‐N (bond) distances of 214.4(6) and 215.1(6) pm and Hg‐Hg‐N angles of 176.9(2) and 165.1(2)°, respectively. These cations are attached via weak Hg‐O contacts to dimers which are further arranged to leave large channels into which one crystal water molecule is included. The second water molecule and the two perchlorate anions are weakly attracted to one Hg atom.     

Routes to unique palladium A-frame complexes with a bridging fluoro-ligand

Treatment of a toluene solution of [PdMe(2)(Cy(2)PCH(2)PCy(2))](1) with pentafluoropyridine in the presence of traces of water affords the generation of the A-frame complexes [(PdMe)(2){mu-kappa(2)(P,P)Cy(2)PCH(2)PCy(2)}(2)(mu-F)][SiMeF(4)]() and [(PdMe)(2){mu-kappa(2)(P,P)Cy(2)PCH(2)PCy(2)}(2)(mu-F)][OC(5)NF(4)](2b). If the reaction is performed in an NMR tube equipped with a PFA inliner, complex 2b is produced, only. Treatment of 1 with pentafluoropyridine in the presence of an excess water yields the pyridyloxy complex [PdMe(OC(5)NF(4))(Cy(2)PCH(2)PCy(2))](3). Compound [(PdMe)(2){mu-kappa(2)(P,P)Cy(2)PCH(2)PCy(2)}(2)(mu-F)][FHF](2c) bearing a bifluoride anion instead of SiMeF(4)(-) or OC(5)NF(4)(-) can be generated by reaction of 1 with substoichiometric amounts of Et(3)N.3HF. The analogous complex [(PdMe)(2){mu-kappa(2)(P,P)Ph(2)PCH(2)PPh(2)}(2)(mu-F)][FHF] (5c) has been synthesized by addition of Ph(2)PCH(2)PPh(2) to a solution of [PdMe(2)(Me(2)NCH(2)CH(2)NMe(2))](4) in THF and subsequent treatment of the reaction mixture with Et(3)N.3HF. The structure of the A-frame complex 5c has been determined by X-ray crystallography.     

Preparation and characterization of fused-silica capillary columns coated with <Emphasis Type="Italic">m</Emphasis>-carborane–siloxane copolymers for gas chromatography

The carborane–siloxane copolymers Dexsil 300, a 34.5% bis(dimethylsilyl)-m-carborane–65.5% dimethylsiloxane copolymer, and Dexsil 400, a 24.9% bis(dimethylsilyl)-m-carborane–50.8% dimethyl, 24.3% methylphenylsiloxane copolymer, were coated on fused silica capillary columns and their gas chromatographic properties were evaluated. Their selectivity was evaluated using both Rohrschneider–McReynolds constants and triacylglycerol indices. The bis(dimethylsilyl)-m-carborane unit turned out to be equivalent to two dimethylsiloxy units and one half of a diphenylsiloxy unit. The m-carborane unit was found to cause a 15–25 K shift in the elution temperature between 120 and 360 °C. The working range was from 20 and 0 °C to 380 °C for Dexsil 300 and Dexsil 400, respectively. The column bleeding levels at 380 °C were below 20 and 15 pA for Dexsil 300 and Dexsil 400, respectively.     

Heats of formation of [2.2]paracyclophane-1-ene and [2.2]paracyclophane-1,9-diene - an experimental study

The enthalpies of formation [Delta(g)] of tricyclo[8.2.2.2(4,7)]hexadeca-1(13),2,4(16),5,7(15),10(14),11-heptaene (2, 1,2-dehydro[2.2]paracyclophane or [2.2]paracyclophane-1-ene) and tricyclo[8.2.2.2(4,7)]hexadeca-1(13),2,4(16),5,7(15),8,10(14),11-octaene (3, 1,2,9,10-dehydro[2.2]paracyclophane or [2.2]paracyclophane-1,9-diene) have been determined by measuring their heats of combustion in a microcalorimeter and their heats of sublimation by the transpiration method. Values of the strain energies (SE) [SE(2) = 34.7 kcal mol(-)(1), SE(3) = 42.0 kcal mol(-)(1)] have been derived from the gas-phase heats of formation and are compared with those from MM3 and PM3 calculations and with the corresponding value SE(1) = 30.1 kcal mol(-)(1) for the parent tricyclo[8.2.2.2(4,7)]hexadeca-1(13),4(16),5,7(15),10(14),11-hexaene (1, [2.2]paracyclophane). The higher strain energies of 2 and 3 (by 4.6 and 11.9 kcal mol(-)(1)) are in accord with the well-known increased reactivities of their aromatic rings as a consequence of their increased bending. As revealed by an X-ray crystal structure analysis, the bending in the monoene 2 corresponds to that of 1 and 3 at one of two bridging corners.