Ion chromatography–inductively coupled plasma mass spectrometry determination of arsenic species in marine samples

Arsenic speciation analysis in marine samples was performed using ion chromatography (IC) with inductively coupled plasma mass spectrometry (ICP‐MS) detection. The separation of eight arsenic species, viz. arsenite, monomethyl arsonic acid, dimethylarsinic acid, arsenate, arsenobetaine, tetramethylarsine oxide, arsenocholine and tetramethylarsonium ion was achieved on a Dionex AS4A (weaker anion exchange column) by using a nitric acid pH gradient eluent (pH 3.3 to 1.3). The entire separation was accomplished in 12 min. The detection limits for the eight arsenic species by IC–ICP‐MS were in the range 0.03–1.6 µ g l^?1, based on 3σ of the blank response (n = 6). The repeatability and day‐to‐day reproducibility were calculated to be less than 10% (residual standard deviation) for all eight species. The method was validated by analyzing a certified reference material (DORM‐2, dogfish muscle) and then successfully applied to several marine samples, e.g. oyster, fish muscle, shrimp and marine algae. The low power microwave digestion was employed for the extraction of arsenic from seafood products. Copyright © 2004 John Wiley & Sons, Ltd.     

Solvent and Structural Effects on the Photoreduction of Cobalt(III)-Aryl Amine Complexes in Water–Organic Solvent Media*

Photoreduction of [Co(En)₂Cl(RC₆H₄NH₂)]²⁺ ions (where R = p-OMe, p-OEt, p-Me, m-Me, H, p-F, and m-OMe) in varying compositions of water–methanol and water–1,4-dioxane mixtures containing 15–40% (vol.) of organic co-solvent is carried out. Ultraviolet excitation of the above complexes in air-equilibrated solutions causes bleaching of its intense LMCT excited states with concurrent production of Co²⁺ion. As seen from the quantum yield data, _Co(II) increases smoothly with increasing content of organic co-solvent in the binary mixtures. The observed values indicate that the metal center is reduced by both ligands and solvent. The quantum yield _Co(II) is considerably affected by the substituent R of the amine, RC₆H₄NH₂ ligand. The effects of solvent and substituted ligands on the _Co(II) are estimated quantitatively using linear regression and multiple correlation methods. The former analysis was carried out using Grunwald–Winstein (Y) Gutmann donor number (DN ^N) and Krygowski–Fawcett E ^N _T (solvent empirical parameters). In addition, Kamlet–Taft's , , and * solvatochromic parameters were also used to study the effect of solute–solvent interaction. The effect of substitution on the aromatic amine ligand affects the quantum yield values, which was established using Hammett's substituent constant . Extensive tabulations of percentage contributions of these parameters, calculated using methods reported earlier, provide suitable values which are presumed to explain the quantitative effects of solvent and structural changes in the aromatic ligand on photoreduction of the cobalt(III) complexes.     

Calculating intensities using effective Hamiltonians in terms of Coriolis-adapted normal modes

The calculation of rovibrational transition energies and intensities is often hampered by the fact that vibrational states are strongly coupled by Coriolis terms. Because it invalidates the use of perturbation theory for the purpose of decoupling these states, the coupling makes it difficult to analyze spectra and to extract information from them. One either ignores the problem and hopes that the effect of the coupling is minimal or one is forced to diagonalize effective rovibrational matrices (rather than diagonalizing effective rotational matrices). In this paper we apply a procedure, based on a quantum mechanical canonical transformation for deriving decoupled effective rotational Hamiltonians. In previous papers we have used this technique to compute energy levels. In this paper we show that it can also be applied to determine intensities. The ideas are applied to the ethylene molecule.     

PAMAM Dendrimers as Anchors for the Preparation of Electrocatalytically Active Ultrathin Metallic Films

This paper describes the formation of catalytically active thin films of Pt, Pt/Au, and Pt/Ru on gold substrates stabilized by amine‐terminated polyamidoamine (PAMAM) dendrimers. A monolayer of dendrimer is initially self‐assembled on the gold substrate, which serves as a template for the growth of catalytically active thin films. As dendrimers contain tens to hundreds of functional groups at the periphery, the aggregate strength of the multidentate interactions with the gold substrate leads to the formation of robust films. The films were found to exhibit high catalytic activity for the oxidation of small hydrocarbons such as methanol. Such films offer versatility and scope for the design of effective electrocatalysts, especially in the context of microfuel cells and “dendrichips”; hence, they could find applications in the fields of sensors, fuel cells, and waste‐water treatment.     

A convenient synthesis of cis and trans 4-tert-butoxycarbonyl-substituted cyclohexylglycine

A novel synthesis of cis and trans substituted 4-tert-butoxycarbonyl cyclohexylglycines via asymmetric aminohydroxylation of vinyl styrene followed by reduction of the aromatic ring and subsequent oxidation is reported.     

Self-assembled coordination cage as a reaction vessel: triplet sensitized [2+2] photodimerization of acenaphthylene, and [4+4] photodimerization of 9-anthraldehyde

Inner cavity of Pd-nanocage has been used as a reaction vessel for performing triplet sensitized [2+2] photodimerization of acenaphthylene using water soluble xanthene dyes (Eosin Y and Rose Bengal) as sensitizers, and [4+4] photodimerization of 9-anthraldehyde. Although the [4+4] photodimerization of 9-anthraldehyde gave similar results to solution reaction, the xanthene dye sensitized [2+2] triplet state photodimerization of acenaphthylene encapsulated within Pd-nanocage yielded the syn dimer in quantitative yield. The results obtained from the triplet state [2+2] photodimerization of acenaphthylene within Pd-nanocage is remarkable given the fact that the photodimerization reaction when performed in methanol in the presence of Eosin Y and Rose Bengal gave the syn and anti dimers in the ratio 0.5 and 0.6, respectively. Preaggregation of molecules encapsulated inside Pd-nanocage in a syn fashion seems to be the governing factor for such a behavior.     

Application of ruthenium-induced macrocyclization for the construction of macrocyclic depsipeptides

The synthesis of a biaryl ether containing macrocyclic depsipeptide 1 was achieved in 6% overall yield. The desired macrocycle was constructed by cyclization of a phenol into eta(6)-ruthenium complex. The ruthenium metal was subsequently photolytically deprotected to obtain the macrocycle 1.     

Optimization of inoculum to substrate ratio for enhanced methane yield from leather fleshings in a batch study

One of the most significant issues of the last few decades has been tracing for renewable energy sources. Animal fleshing (ANFL) is the most common proteinaceous solid waste accured during the production of leather and it must be disposed of in an environmentally responsible manner. This paper is attempts to assess the biogas production from solid waste originating from the chrome based tannery. Anaerobic digestion of these wastes will be a viable option for waste stabilization and energy production in the form of biogas to be utilized in the industry. The bio-methane potential of the wastes were examined by mixing these wastes with various sources of inoculum and different inoculum to substrate (I/S) ratio considered. The batch experiments were carried out in 2.5 l glass reactors with a various source of inoculumviz., Cow Dung (CD), Elephant Dung (ED) and Bio-Digested Slurry (BDS) with varied inoculum to substrate (LFs) ratios for a retention time of 50 days with replications. The results obtained from the experiments showed that BDS:LF (25:75) had the highest gas production of 14505 ml (651.85 ml CH₄g^?1 VS) followed by CD:LF (50:50) produced 12072.5 ml (789.36 ml CH₄g^?1 VS) and ED:LF (75:25) produced 11252.5 ml (1492.08 ml CH₄g^?1 VS)with a methane content of 63.77, 61.92 and 62.72%, respectively.     

Theoretical and experimental investigation of the effect of proton transfer on the (27)al MAS NMR line shapes of zeolite-adsorbate complexes: an independent measure of solid Acid strength

Assessing the degree of proton transfer from a Br?nsted acid site to one or more adsorbed bases is central to arguments regarding the strength of zeolites and other solid acids. In this regard certain solid-state NMR measurements have been fruitful; for example, some (13)C, (15)N, or (31)P resonances of adsorbed bases are sensitive to protonation, and the (1)H chemical shift of the Br?nsted site itself reflects hydrogen bonding. We modeled theoretically the structures of adsorption complexes of several bases on zeolite HZSM-5, calculated the quadrupole coupling constants (Q(cc)) and asymmetry parameters (eta) for aluminum in these complexes and then in turn simulated the central transitions of their (27)Al MAS NMR spectra. The theoretical line width decreased monotonically with the degree of proton transfer, reflecting structural relaxation around aluminum as the proton was transferred to a base. We verified this experimentally for a series of adsorbed bases by way of single-pulse MAS and triple quantum MQMAS (27)Al NMR. The combined theoretical and experimental approach described here provides a strategy by which (27)Al data can be applied to resolve disputed interpretations of proton transfer based on other evidence.     

Design and construction of an open multistranded beta-sheet polypeptide stabilized by a disulfide bridge

The design and characterization of an open eight-stranded beta-sheet in a synthetic, 2-fold symmetric 70-residue peptide is described. The design strategy involves the generation of a 35-residue four-stranded beta-sheet peptide in which successive hairpins are nucleated by appropriately positioned (D)Pro-Xxx sequences. Oxidative dimerization using a single Cys residue positioned at the center of the C-terminal strand results in a disulfide-bridged eight-stranded structure. Nuclear Overhauser effects firmly establish an eight-stranded beta-sheet in methanol. In water, the outer strands are frayed, but a well-defined four-stranded beta-sheet stabilized by a disulfide bridge and a hydrophobic cluster is determined from NMR data. Comparison of the precursor peptide with the disulfide-bridged dimer reveals considerable enhancement of beta-sheet content in the latter, suggesting that the disulfide cross-link is an effective strategy for the stabilization of beta-sheets.