Dynamic vulcanization of reclaimed tire rubber and high density polyethylene blends

Dynamic vulcanization of reclaimed tire rubber (RTR) and HDPE blends was reported. The effect of blend ratio, methods of vulcanization, i.e. sulphur, peroxide, and mixed system and the addition of compatibilizer on mechanical, thermal, and rheological properties were investigated. The blend with highest impact strength was obtained from 50/50 RTR/HDPE vulcanized by sulphur. Increasing the RTR content to more than 50% resulted in a decrease in the impact strength of blend, most likely due to the increasing carbon black content. For tensile strength, the presence of rubber and carbon black, however, unavoidably caused a drop in this property. Comparing among three methods of vulcanization, sulphur system seems to be the most effective method. Results from solvent swelling ratio, glass transition temperatures and viscosity indicated that the sulphur vulcanization created the highest degree of cross-link and filler-matrix interaction in the RTR/HDPE blend. Morphology of the blends was also assessed by scanning electron microscopy (SEM).     

Effects of methyl methacrylate grafting and in situ silica particle formation on the morphology and mechanical properties of natural rubber composite films

The effects of methyl methacrylate (MMA) grafting and in situ formation of silica particles on the morphology and mechanical properties of natural rubber latex (NRL) were investigated. MMA grafting on NRL was carried out using cumyl hydroxy peroxide/tetraethylene pentamine (CHPO/TEPA) as a redox initiator couple. The grafting efficiency of the grafted NR was determined by solvent extractions and the grafted NRL was then mixed with tetraethoxysilane (TEOS), a precursor of silica, coated by adherence to a glass surface to form a film and cured at 80°C. The resultant products were characterized by FT‐IR and transmission electron microscopy. The influence of varying the MMA monomer weight ratio on the surface morphology of the composites was investigated by scanning electron and atomic force microscopy. The PMMA (poly MMA) grafted NRL particles were obtained as a core/shell structure from which the NR particles were the core seed and PMMA was a shell layer. The silane was converted into silica particles by a sol–gel process which was induced during film drying at 80°C. The silica particles were fairly evenly distributed in the ungrafted NR matrix but were agglomerated in the grafted NR matrix. The root‐mean‐square roughness increased with an increasing weight ratio of MMA in the rubber. The in situ silica particles in the grafted NR matrix slightly increased both the modulus and the tear strength of the composite film. Copyright © 2008 John Wiley & Sons, Ltd.     

Surface Modification of Chitosan Films-Grafting Ethylene Glycol Oligomer and Its Effect on Protein Adsorption

This work is a part of a series on surface modification of materials made of chitosan. This report focused on grafting monomethoxy ethylene glycol oligomers (mPEG) on the surface of chitosan films. The chemical reactions were performed by immersing the films in organic solvent containing aldehyde derivative of mPEG. The presence of ethylene glycol moieties was determined by attenuated total reflectance-infrared spectroscopy (ATR-IR) and nuclear magnetic resonance (NMR). The hydrophobicity of the modified surface, determined by air-water contact angle, decreased when the ethylene glycol derivatives were grafted on the film. The modified films were also subjected to protein adsorption study in order to assess their uses in biomedical applications. It was found that the presence of ethylene glycol units reduced the adsorption of proteins (albumin and lysozyme) on the films. We therefore have shown that manipulation of the interaction between chitosan and bio-macromolecules is possible by chemically modifying the surface of chitosan.