The potential use of electrospun polylactic acid nanofibers as alternative reinforcements in an epoxy composite system

This pilot study elaborates the development of novel epoxy/electrospun polylactic acid (PLA) nanofiber composites at the fiber contents of 3, 5, and 10 wt % to evaluate their mechanical and thermal properties using flexural tests and differential scanning calorimetry (DSC). The flexural moduli of composites increase remarkably by 50.8 and 24.0% for 5 and 10 wt % fiber contents, respectively, relative to that of neat epoxy. Furthermore, a similar trend is also shown for corresponding flexural strengths being enhanced by 31.6 and 4.8%. Fractured surface morphology with scanning electron microscopy (SEM) confirms a full permeation of cured epoxy matrix into nanofiber structures and existence of nondestructive fibrous networks inside large void cavities. The glass transition temperature (T_g) of composites increases up to 54–60 °C due to embedded electrospun nanofibers compared to 50 °C for that of epoxy, indicating that fibrous networks may further restrict the intermolecular mobility of matrix in thermal effects. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 618–623     

Transferred multipolar atom model for 10β,17β‐dihydroxy‐17α‐methylestr‐4‐en‐3‐one dihydrate obtained from the biotransformation of methyloestrenolone

Biotransformation is the structural modification of compounds using enzymes as the catalysts and it plays a key role in the synthesis of pharmaceutically important compounds. 10β,17β‐Dihydroxy‐17α‐methylestr‐4‐en‐3‐one dihydrate, C₁₉H₂₈O₃·2H₂O, was obtained from the fungal biotransformation of methyloestrenolone. The structure was refined using the classical independent atom model (IAM) and a transferred multipolar atom model using the ELMAM2 database. The results from the two refinements have been compared. The ELMAM2 refinement has been found to be superior in terms of the refinement statistics. It has been shown that certain electron‐density‐derived properties can be calculated on the basis of the transferred parameters for crystals which diffract to ordinary resolution.     

Influence of mixture sensitivity and pore size on detonation velocities in porous media

Experiments have been carried out to determine the dependence of the detonation velocity in porous media, on mixture sensitivity and pore size. A detonation is established at the top end of a vertical tube and allowed to propagate to the bottom section housing the porous bed, comprised of alumina spheres of equal diameter (1–32 mm). Several of the common detonable fuels were tested at atmospheric initial pressure. Results indicate the existence of a continuous range of velocities with change in Φ, spanning the lean and the rich propagation limits. For all fuels in a given porous bed, the velocity decreases from a maximum value at the most sensitive mixture near Φ≈1 (minimum induction length), toV/V _CJ≈0.3 at the limits. A decrease in pore size brings about a reduction inV/V _CJ and a narrowing of the detonability range for each fuel. For porous media comprised of spherical particles, it was possible to correlate the velocity data corresponding to a variety of different mixtures and for a broad range of particle sizes, using the following empirical expression:V/V _CJ=[1–0.35 log(d _c /d _p)]±0.1. The critical tube diameterd _c is used as a measure of mixture sensitivity andd _p denotes the pore diameter. An examination of the phenomenon at the composition limits, suggests that wave failure is controlled by a turbulent quenching mechanism.     

Differential functional theory and molecular docking studies of newly synthesized carbamates

Four new carbamates (RZ1–RZ4) were synthesized from different amine moieties through reported methods. The reaction was monitored using thin layer chromatography and characterization was done using m.p., fourier‐transform infrared spectroscopy (FTIR), and X‐ray diffraction (XRD) techniques. Density functional theory (DFT) studies were carried out using Gaussian 09 software to compare the theoretical and practical parameters of the synthesized compounds. Highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) were also drawn to calculate the energy difference between orbitals. In‐vitro enzyme inhibition potential against acetylcholine esterase (AChE), butyrylcholine esterase (BChE), and protease was checked through standard protocols that suggested moderate inhibition against selected enzymes. Docking studies were also carried out, which depicted that these compounds have ability to bind on the active site of AChE and BChE.     

Facile one-pot synthesis,butyrylcholinesterase and α-glucosidase inhibitory activities,structure–activity relationship,molecular docking and DNA–drug binding analysis of Meldrum’s acid derivatives

Research on Chemical Intermediates - Meldrum’s acid derivatives were facile synthesized by one-pot condensation process and characterized by NMR (1H, 13C, DEPT-90 and DEPT-135) and EI-MS. The...     

Effects of polyvinylpyrrolidone on structural and optical properties of willemite semiconductor nanoparticles by polymer thermal treatment method

Journal of Thermal Analysis and Calorimetry - Willemite is an inorganic semiconductor material used for optoelectronic applications. The present study purposes a new polymer thermal treatment...     

Experimental investigation of natural convection heat transfer characteristics in MWCNT-thermal oil nanofluid

Journal of Thermal Analysis and Calorimetry - The carbon nanotubes are considered as one of the highest thermal conductive material which is having a variety of heat transfer applications. The...     

Improved cell viability and hydroxyapatite growth on nitrogen ion-implanted surfaces

Stainless steel 306 is implanted with various doses of nitrogen ions using a 2?MV pelletron accelerator for the improvement of its surface biomedical properties. Raman spectroscopy reveals incubation of hydroxyapatite (HA) on all the samples and it is found that the growth of incubated HA is greater in higher ion dose samples. SEM profiles depict uniform growth and greater spread of HA with higher ion implantation. Human oral fibroblast response is also found consistent with Raman spectroscopy and SEM results; the cell viability is found maximum in samples treated with the highest (more than 300%) dose. XRD profiles signified greater peak intensity of HA with ion implantation; a contact angle study revealed hydrophilic behavior of all the samples but the treated samples were found to be lesser hydrophilic compared to the control samples. Nitrogen implantation yields greater bioactivity, improved surface affinity for HA incubation and improved hardness of the surface.