Differential pulse voltammetry with fast pulse repetition times in a flow-injection system with a copper-amalgam electrode

The reductive determination of cadmium and zinc is used to illustrate the effects of pulse repetition times in differential pulse voltammetry at solid electrodes. With 100-ms repetition times, signal-to-background ratio is shown to improve in flow-injection response studies at a copper-amalgam working electrode for both voltage scanning and amperometric operation, allowing scan rates up to 100 mV s^?1, and detection limits of 0.07–0.15 ng for cadmium and zinc after deaeration of sample solutions. Peak widths at baseline in the range 12–30 s, depending on flow rate, are obtained in the flow-injection system for cadmium and zinc at working potentials of ?0.77 and ?1.27 V, respectively. Interferences occur when cadmium is in large excess over zinc, although the voltammetric peaks do not overlap.     

Morphology of peroxide-prevulcanised natural rubber latex: effect of reaction time and deproteinisation

A non-uniform mesh structure, i.e. a dense network near the surface of peroxide-prevulcanised natural rubber latex particles, was observed under transmission electron microscopy. In the initial period of prevulcanisation, the swelling ratio of the latex sheet decreased with longer reaction time while an increase in crosslink density of rubber particles containing polystyrene, prepared using the phase transfer/bulk polymerisation process, was noticed. The modulus of the rubber sheet increased up to maximum crosslinking and thereafter decreased. After removal of proteins from the latex membrane layer, derived from protein-lipid originally existing at the rubber particle surface, could not be detected. The absence of proteins, which act as free radical scavengers, resulted in a rapid diffusion of alkoxy radicals into the rubber phase of deproteinised latex and, therefore, a uniform crosslink distribution inside each particle was obtained.     

Prevulcanisation of skim latex: morphology and its use in natural rubber based composite material

The prevulcanisation of skim latex, a by-product of field natural rubber (NR) latex concentrated by centrifugation, using sulphur and peroxide systems was investigated. Compared to the peroxide prevulcanisation, the lower swelling ratio of film casted from sulphur-prevulcanised skim (SPVS) latex was observed. The latter was then employed for preparation of NR/SPVS core–shell particles by using heterocoagulation technique whose driving force was an interpolymer complex between poly(ethylene oxide) (PEO) moieties of a non-ionic surfactant (Nonidet) adsorbed on small SPVS particles and the indigenous surfactant (protein–lipid) on a large NR particle. The value of zeta potential of heterocoagulated particle and the better oil resistance of films casted from the composite latex when compared to that of the NR film revealed the NR/SPVS core–shell structure.     

Fluorescent Polyurethane Nanocapsules Prepared via Inverse Miniemulsion: Surface Functionalization for Use as Biocarriers

The functionalization of well‐defined PU nanocapsules with an aqueous core prepared by performing a polyaddition at the interface of inverse (water‐in‐oil) miniemulsion droplets is demonstrated. The miniemulsion technique involving the nanoreactor concept allows one to obtain an encapsulation efficiency as high as 90% within the nanocapsules. A pH independent fluorescent dye is used as a model system for the aqueous core. By varying the molar ratio of the diol to the diisocyanate at a fixed surfactant concentration, the shell thickness of the nanocapsules can be finely tuned. The carboxy‐ and amino‐functionalized surface of the nanocapsules can be tailored by an in‐situ carboxymethylation reaction and by physical adsorption of a cationic polyelectrolyte, i.e. PAEMA or PEI. The increased uptake of amino‐functionalized fluorescent nanocapsules by HeLa cells clearly demonstrates the potential of the functionalized nanocapsules to be successfully exploited as biocarriers.

     

Antiseptic Nanocapsule Formation via Controlling Polymer Deposition onto Water-in-Oil Miniemulsion Droplets

The stable nanodroplet was prepared by inverse miniemulsion with an aqueous antiseptic solution dispersed in an organic medium of solvent/nonsolvent mixture containing an oil-soluble surfactant and the polymer for shell formation. The change in gradient of the solvent/nonsolvent mixture, obtained by heating at 50 °C, led to the precipitation of the polymer in the organic phase and deposition onto the large interphase of the aqueous miniemulsion droplets. The monodisperse polymer nanocapsule, with the size range of 80–240 nm, dispersed in cyclohexane phase was achieved as a function of surfactant concentration. By variation of polymer content, molecular weight and type, an encapsulation efficiency of 20–100% was obtained as detected by proton-nuclear magnetic resonance spectroscopy measurement. The nanocapsule could be easily transferred into water as continuous phase resulting in aqueous dispersion with nanocapsule containing the antiseptic agent as an aqueous core. The encapsulated amount of the antiseptic agent was evaluated to indicate the durability of the nanocapsule's wall. Additionally, the different types of polymer having glass transition temperature ranging from −60 to 100°C have been successfully used. Currently, the research work on the incorporation of nanocapsules onto natural rubber (NR) latex in order to prepare NR latex glove containing the antiseptic agent nanocapsules is carried out. By using the simple and versatile layer-by-layer (LbL) technique based mainly on an electrostatic interaction between oppositely charged species, the deposition of nanocapsules onto NR latex film has successfully been fulfilled.     

Polymeric nanocapsules containing an antiseptic agent obtained by controlled nanoprecipitation onto water-in-oil miniemulsion droplets

The modified nanoprecipitation of polymers onto stable nanodroplets has been successfully applied to prepare well-defined nanocapsules whose core is composing of an antiseptic agent, i.e., chlorhexidine digluconate aqueous solution. The stable nanodroplets were obtained by inverse miniemulsions with an aqueous antiseptic solution dispersed in an organic medium of solvent/nonsolvent mixture containing an oil-soluble surfactant and the polymer for the shell formation. The change of gradient of the solvent/nonsolvent mixture of dichloromethane/cyclohexane, obtained by heating at 50 degrees C, led to the precipitation of the polymer in the organic continuous phase and deposition onto the large interface of the aqueous miniemulsion droplets. The monodisperse polymer nanocapsules with the size range of 240-80 nm were achieved as a function of the amount of surfactant. Using various polymer contents, molecular weights and types, an encapsulation efficiency of 20-100% was obtained as detected by proton-nuclear magnetic resonance spectroscopy ((1)H NMR) measurements. The nanocapsules could be easily transferred into water as continuous phase resulting in aqueous dispersions with nanocapsules containing an aqueous core with the antiseptic agent. The encapsulated amount of the antiseptic agent was evaluated to indicate the durability of the nanocapsule's wall. In addition, the use of different types of polymers having glass transition temperatures (T(g)) ranging from 10 to 100 degrees C in this process has been also successful.