Investigations for Modification of Polyacrylamide-Bentonite by Phytic Acid and its Usability in Fe3+, Zn2+ and UO2 2+ Adsorption

Composite of polyacrylamide-bentonite (PAA-B) was prepared by direct polymerisation of PAA in a suspension of bentonite (B). Adsorption and thermodynamic features of phytic acid (Phy) adsorption onto B, PAA and PAA-B, and those of Fe³⁺, Zn²⁺, UO₂ ²⁺ adsorption onto PAA-B and its modification by Phy (PAA-B-Phy) have been investigated. The reusability, storagability, ion selectivity and recoverability of sorbed ions with 1 M HCl have also been considered.The chemical and physical structure of adsorbents has been characterised by means of FT-IR and XRD. All adsorption isotherms for Phy and the ions were L-type of the Giles classification except, the one which is S type for adsorption of Phy onto PAA. The maximum adsorption capacities for the ions adsorbed were in order of UO₂ ²⁺ > Fe³⁺ > Zn²⁺ for PAA-B and Zn²⁺ > Fe³⁺ > UO₂ ²⁺ for PAA-B-Phy. Langmuir equilibrium constants for the adsorption of ions onto PAA-B-Phy were significantly higher than those found for PAA-B; the magnitude of increase for UO₂ ²⁺ was about 100. The thermodynamic parameters indicated that adsorption reactions are spontaneous in terms of adsorption free enthalpy.The chemical structure of PAA-B-Phy was not changed at the end of the studies of reusability and storagability. The composite was selective for UO₂ ²⁺ of the ions of interest.The composite of PAA-B and its modification by Phy have been used for the first time in this investigation. It is proposed that the composites can be practically used in the investigations and applications of adsorption.     

New 6-(4-Bromophenyl)-imidazo[2,1-b]thiazole Derivatives: Synthesis and Antimicrobial Activity

Summary.  New 4-alkyl/aryl-1-((6-(4-bromophenyl)-imidazo[2,1-b]thiazol-3-yl)-acetyl)-3-thiosemicarbazides and 3-alkyl/aryl-2-(((6-(4-bromophenyl)-imidazo[2,1-b]thiazol-3-yl)-acetyl)-hydrazono)-4-thiazolidinones were synthesized from 6-(4-bromophenyl)-imidazo[2,1-b]thiazole-3-acetic acid hydrazide. Their structures were elucidated by elemental analyses and spectroscopic data. All compounds were tested for antibacterial and antifungal activities. The antimicrobial activities of the compounds were assessed by the microbroth dilution technique. The compounds were also evaluated for antituberculosis activity against Mycobacterium tuberculosis H₃₇Rv (ATCC 27294); they exhibited varying degrees of inhibition in the in vitro primary screening at 6.25 μg · cm⁻³. The most active compound was 3-(4-nitrophenyl)-2-(((6-(4-bromophenyl)-imidazo[2,1-b]thiazol-3-yl)-acetyl)-hydrazono)-4-thiazolidinone. Corresponding author. E-mail: nurayulusoy@yahoo.com Received December 10, 2001. Accepted (revised) March 1, 2002     

Natural Melanin Nanoparticle‐decorated Screen‐printed Carbon Electrode: Performance Test for Amperometric Determination of Hexavalent Chromium as Model Trace

A biosensor was prepared with natural melanin nanoparticles (MNP) decorated on a screen‐printed carbon electrode (SPCE). Hexavalent chromium was selected as a well‐known heavy metal ion to be detected for testing the performance of novel biosensor. Natural MNP was extracted from cuttlefish (Sepia officinalis) ink. Surface decoration of SPCEs with MNP was performed by two different methods. The first one was layer‐by‐layer assembly (LBL‐A) for different cycle times(n). In the second one, plasma treatment of SPCE incorporated with evaporation‐induced self‐assembly (EI‐SA) techniques including different incubation times in MNP solutions. The performance of both modified SPCEs were tested for amperometric detection of Cr(VI) in various water samples, and peak reduction of Cr(VI) was determined at 0.33 V. Amperometric results showed wide linear ranges of 0.1–2 μM and 0.1–5 μM of Cr(VI) for SPCEs modified with 14n‐LBL‐A and 12h‐EI‐SA, respectively. The sensitivities of SPCEs modified with 14n‐LBL‐A and 12h‐EI‐SA techniques were 0.27 μA μM^?1 and 0.52 μA μM^?1, respectively. In addition, both modified SPCEs selectively detected Cr(VI) in a model aqueous system composed of certain other heavy metals and minerals, and tap and lake water samples. The LOD and LOQ values for 12h‐EI‐SA were 0.03 μM and 0.1 μM, respectively. This showed that MNP‐modified‐SPCEs generated via EI‐SA techniques have the potential to be an alternative to conventional detection methods such as ICP‐MS.     

Multiprocessor task scheduling in multistage hybrid flow-shops: a genetic algorithm approach

This paper considers multiprocessor task scheduling in a multistage hybrid flow-shop environment. The objective is to minimize the make-span, that is, the completion time of all the tasks in the last stage. This problem is of practical interest in the textile and process industries. A genetic algorithm (GA) is developed to solve the problem. The GA is tested against a lower bound from the literature as well as against heuristic rules on a test bed comprising 400 problems with up to 100 jobs, 10 stages, and with up to five processors on each stage. For small problems, solutions found by the GA are compared to optimal solutions, which are obtained by total enumeration. For larger problems, optimum solutions are estimated by a statistical prediction technique. Computational results show that the GA is both effective and efficient for the current problem. Test problems are provided in a web site at www.benchmark.ibu.edu.tr/mpt-hfsp.     

Building an Iron Chromophore Incorporating Prussian Blue Analogue for Photoelectrochemical Water Oxidation

The replacement of traditional ruthenium-based photosensitizers with low-cost and abundant iron analogs is a key step for the advancement of scalable and sustainable dye-sensitized water splitting cells. In this proof-of-concept study, a pyridinium ligand coordinated pentacyanoferrate(II) chromophore is used to construct a cyanide-based CoFe extended bulk framework, in which the iron photosensitizer units are connected to cobalt water oxidation catalytic sites through cyanide linkers. The iron-sensitized photoanode exhibits exceptional stability for at least 5 h at pH 7 and features its photosensitizing ability with an incident photon-to-current conversion capacity up to 500 nm with nanosecond scale excited state lifetime. Ultrafast transient absorption and computational studies reveal that iron and cobalt sites mutually support each other for charge separation via short bridging cyanide groups and for injection to the semiconductor in our proof-of-concept photoelectrochemical device. The reorganization of the excited states due to the mixing of electronic states of metal-based orbitals subsequently tailor the electron transfer cascade during the photoelectrochemical process. This breakthrough in chromophore-catalyst assemblies will spark interest in dye-sensitization with robust bulk systems for photoconversion applications.     

Conversion of carbon dioxide to cyclic carbonates using diimine Ru(II) complexes as catalysts

Cationic diimine Ru(II) complexes were synthesized and tested as catalysts for the formation of cyclic organic carbonates from CO₂ and liquid epoxides (propylene oxide, epichlorohydrine, 1,2‐epoxybutane and styrene oxide) which served as both reactant and solvent. The reaction rates not only depended on the type of ligand, but also on reaction conditions such as temperature, pressure, base, the epoxide substrates and the use of an additional solvent. Reaction rates in terms of turnover frequencies up to 4050 mol_product mol_cat.^?1 h^?1 at 99% selectivity were achieved by optimizing the diimine ligand as well as the reaction temperature and CO₂ pressure. Consistent with CV measurements, the electron donating group on the p‐position of the aryl ring accelerated the reaction rate. Copyright © 2008 John Wiley & Sons, Ltd.     

Imidazolium salicylaldimine frameworks for the preparation of tridentate N-heterocyclic carbene ligands

Sterically hindered salicylaldimine functionalized imidazolium salts 2 have been prepared. The structures of the synthesized compounds were determined by spectroscopic techniques. The reaction of these salts containing arylmethyl-N chain (aryl: phenyl (2a), 2,4,6-trimethylphenyl (2b), 2,3,4,5,6-pentamethylphenyl (2c)) with Pd(OAc)₂ in boiling toluene afforded Pd(II) complexes 3 in high yields. The X-ray structure of 1-[3-(3,5-di-tert-butyl-2-oxophenyl)propyliminato]-3-(2,4,6-trimethylbenzyl)imidazol-2-ylidenebromopalladium(II) (3b) has been determined. The Suzuki-Miyaura reaction was used to investigate their activity as catalysts either prepared in situ or from well-defined complexes. They are efficient when activated arylbromides are used as substrates.     

Co(II) and Cu(II) Schiff base complexes of bis(<Emphasis Type="Italic">N</Emphasis>-(4-diethylamino-2-methylphenyl)-3,5-di-<Emphasis Type="Italic">tert</Emphasis>-butylsalicylaldimine): Electrochemical and X-ray structural study

Copper(II) and cobalt(II) complexes of salicylaldimine obtained by the condensation of N,N-diethyl-2-methyl-1,4-phenylenediamine with 3,5-di-tert-butyl-2-hydroxybenzaldehyde have been synthesized and characterized by elemental analyses, magnetic susceptibility measurements, cyclic voltammetry, and FT-IR and UV–Vis spectroscopy. The molecular structure of the title copper(II) complex was determined by the single crystal X-ray diffraction technique. The Cu(II) center is coordinated by four atoms of the donor set in a compressed tetrahedral trans-[N₂O₂] environment, which can be essentially ascribed to the presence of bulky fragments of the ligand. The computed bond valences of the copper verify +2 oxidation state and indicate that the copper bonds, in particular Cu–N bonds, are elongated due to steric effects from bulky substituents in the ligands, N-(4-diethylamino-2-methylphenyl). Intermolecular C–H···π interactions leading to centrosymmetric synthons serve to stabilize periodic organization of the molecules.     

The fleet size and mix problem for capacitated arc routing

There have been several attempts to solve the capacitated arc routing problem with m vehicles starting their tours from a central node. The objective has been to minimize the total distance travelled. In the problem treated here we also have the fixed costs of the vehicles included in the objective function. A set of vehicle capacities with their respective costs are used. Thus the objective function becomes a combination of fixed and variable costs. The solution procedure consists of four phases. In the first phase, a Chinese or rural postman problem is solved depending on whether all or some of the arcs in the network demand service with the objective of minimizing the total distance travelled. It results in a tour called the giant tour. In the second phase, the giant tour is partitioned into single vehicle subtours feasible with respect to the constraints. A new network is constructed with the node set corresponding to the arcs of the giant tour and with the arc set consisting of the subtours of the giant tour. The arc costs include both the fixed and variable costs of the subtours. The third phase consists of solving the shortest path problem on this new network to result in the least cost set of subtours represented on the new network. In the last phase a postprocessor is applied to the solution to improve it. The procedure is repeated for different giant tours to improve the final solution. The problem is extended to the case where there can be upper bounds on the number of vehicles with given capacities using a branch and bound method. Extension to directed networks is given. Some computational results are reported.     

Hetero‐ and homo‐leptic Ru(II) catalyzed synthesis of cyclic carbonates from CO2; Synthesis,spectroscopic characterization and electrochemical properties

Based on the a ligand BDPPZ [(9a,13a‐dihydro‐4,5,9,14‐tetraaza‐benzo[b]triphenylene‐11‐yl)‐phenyl‐methanone] (1) and its polypyridyl hetero‐ and homoleptic Ru(II) metal complexes, [Ru(bpy)₂L](PF₆)₂ (2), [Ru(phen)₂L](PF₆)₂ (3), [Ru(dafo)₂L](PF₆)₂ (4), [Ru(dcbpy)₂L](PF₆)₂ (5) and [RuL₃](PF₆)₂ (6) (where, L = ligand, bpy = 2,2′‐bipyridine, phen = 1,10‐phenantroline, dafo = 4,5‐diazafluoren‐9‐one and dcbpy = 3,3′‐dicarboxy‐2,2′‐bipyridine), have been synthesized and characterized by elemental analysis, UV–vis, FT‐IR, ¹H and ¹³C‐NMR spectra (for ligand), molar conductivity measurements and X‐ray powder techniques. The electrochemical parameters of the substituted ligand and its polypyridyl hetero‐ and homoleptic Ru(II) metal complexes are reported by cyclic voltammetry. UV–vis spectroscopy is used to compare the differences between the conjugated π systems in this ligand and its Ru(II) metal complexes. The polypyridyl hetero‐ and homoleptic Ru(II) metal complexes also tested as catalysts for the formation of cyclic organic carbonates from carbon dioxide and liquid epoxides which served as both reactant and solvent. The results showed that the [Ru(L)₃](PF₆)₂ (6) complex is more efficient than the other Ru(II) complexes for the formation of cyclic organic carbonates from carbon dioxide. Copyright © 2010 John Wiley & Sons, Ltd.