Nonlinear frequency response analysis: a recent review and perspectives

The nonlinear frequency response analysis (NFRA) can be seen as an extension of electrochemical impedance spectroscopy. NFRA gives a full and detailed representation of the system response and can establish a connection between model parameters and the experimentally observed phenomena. In this article, different theoretical NFRA approaches and the most recent application examples are discussed. A simple electrochemical example is used to showcase the benefits and disadvantages of analyzing the system response by using different approaches. In addition, it was shown how to extract experimental harmonic values and analyze them.     

Optimal dynamic control of predator–prey models

Central European Journal of Operations Research - This paper combines work to use a decision support tool for sustainable economic development, while acknowledging interdependent dynamics of...     

Ion-exchange selectivity of anion exchange resin modified with polystyrenesulfonic acid.

In order to change the ion-exchange selectivity of anion-exchange resin, the surface of a gel-type anion exchange resin was modified with anionic polyelectrolyte, polystyrenesulfonic acid. Using this modified resin, the ion-exchange rate of nitrate was little decreased, but that of sulfate was evidently decreased. It is considered that the ion-exchange reaction of the multivalent anion is suppressed by the greater electrostatic repulsive force against the modification layer than that against the monovalent anion. Thus, this modified resin may be suitable for the selective separation of monovalent anions. The influence of the modified condition on the ion-exchange rate was examined. Furthermore, this modified resin was used to separate nitrate ions from sulfate ions in the aqueous solution.     

High pressure mössbauer studies of magnetic actinide systems

Due to the wider radial extent of 5f electrons when compared to their 4f counterparts, intermetallics of the light actinides show a broad spectrum of magnetic properties ranging from the localized magnetism of the lanthanides to the itinerant magnetism often found in transition metal compounds. One parameter which strongly influences the magnetic character of the compound is the actinide-actinide separation which can experimentally be varied by the application of high pressure. The question of 5f electron delocalization will be reviewed with respect to Moesshauer high pressure data on NpCo₂si₂, NpAl₂, NpOs₂ and new results will be presented of NpAs. The connection of hyperfine parameters with results of X-ray diffraction studies will be discussed.Work supported by the Bundesministerium für Forschung und Technologie, Federal Republic of Germany     

Hypervalent Iodine(III) Sulfonate Mediated Synthesis of Imidazo[1,2‐a]pyridines

A direct and efficient method for the conversion of alkyl aryl ketones to imidazo[1,2‐α]pyridines has been developed based on initial formation of α‐organosulfonyloxy ketones and their subsequent cyclocondensation by 2‐aminopyridines in one‐pot conditions.     

Synthesis of Imidazo[2,1‐a]isoquinolines from α‐Tosyloxyketones and 1‐Aminoisoquinoline in Ionic Liquid Solvent

The room temperature ionic liquid n‐butylpyridinium tetrafluoroborate (BPyBF₄) is used as a ‘green’ recyclable alternative to classical molecular solvents for the cyclocondensation of α‐tosyloxyketones with 1‐aminoisoquinoline to prepare imidazo[2,1‐a]isoquinolines in good yields.     

Zum Mechanismus der nucleophilen Addition an 2,3-Dihydrodipyrrin-1(10H)-one

¹H NMR-spectroscopic investigations of the acid catalyzed addition of methanol to dihydrodipyrrinones (Z)-2, (E)-2, and4 show the C-protonation of their enamide parts to be the first and rate determining step forming the key intermediate, the N-acyl-immonium ion N⁺. Its ability to add nucleophiles diastereoselectively can be used to prepare the adductsl-3 andl-5. Exclusive formation of thelike-isomer can be explained by a stereoelectronically favoured approach of the nucleophile and by the thermodynamically favoured arrangement of the bulky ring substituents. Both explanations are based on low temperature X-ray crystal structure determinations: in the first place, the orientation of the added nucleophile could be found to be nearly parallel to the -plane of the lactam unit and quasi-axial with respect to theenvelope-like conformation of the five-ring lactam; in the second place, the relative orientation of the methoxycarbonyl-metyl-group at C-3 and the pyrrolylmethyl-substituent at C-4 could be found to be atrans-quasi-diequatorial one.

     

The surface and materials science of tin oxide

The study of tin oxide is motivated by its applications as a solid state gas sensor material, oxidation catalyst, and transparent conductor. This review describes the physical and chemical properties that make tin oxide a suitable material for these purposes. The emphasis is on surface science studies of single crystal surfaces, but selected studies on powder and polycrystalline films are also incorporated in order to provide connecting points between surface science studies with the broader field of materials science of tin oxide. The key for understanding many aspects of SnO₂ surface properties is the dual valency of Sn. The dual valency facilitates a reversible transformation of the surface composition from stoichiometric surfaces with Sn⁴⁺ surface cations into a reduced surface with Sn²⁺ surface cations depending on the oxygen chemical potential of the system. Reduction of the surface modifies the surface electronic structure by formation of Sn 5s derived surface states that lie deep within the band gap and also cause a lowering of the work function. The gas sensing mechanism appears, however, only to be indirectly influenced by the surface composition of SnO₂. Critical for triggering a gas response are not the lattice oxygen concentration but chemisorbed (or ionosorbed) oxygen and other molecules with a net electric charge. Band bending induced by charged molecules cause the increase or decrease in surface conductivity responsible for the gas response signal. In most applications tin oxide is modified by additives to either increase the charge carrier concentration by donor atoms, or to increase the gas sensitivity or the catalytic activity by metal additives. Some of the basic concepts by which additives modify the gas sensing and catalytic properties of SnO₂ are discussed and the few surface science studies of doped SnO₂ are reviewed. Epitaxial SnO₂ films may facilitate the surface science studies of doped films in the future. To this end film growth on titania, alumina, and Pt(1 1 1) is reviewed. Thin films on alumina also make promising test systems for probing gas sensing behavior. Molecular adsorption and reaction studies on SnO₂ surfaces have been hampered by the challenges of preparing well-characterized surfaces. Nevertheless some experimental and theoretical studies have been performed and are reviewed. Of particular interest in these studies was the influence of the surface composition on its chemical properties. Finally, the variety of recently synthesized tin oxide nanoscopic materials is summarized.     

Tautomerism and stereochemistry of hypericin: Force field,NMR, and X-ray crystallographic investigations

Summary Stereochemistry and tautomerism of hypericin, pseudohypericin, and several of their partial structure models were investigated using an MM2 derived force field method. Besides the propeller type conformer, which was also found by the X-ray crystallographic study, the complicated energy hypersurface was shown to contain a novel double-butterfly conformer of similar stability. The upper limit interconversion barrier between these conformers and their enantiomers was found to be in the order of 115 kJ/mol.¹H-NMR experiments suggested a lower limit interconversion barrier of at least 80 kJ/mol. From the ten tautomers possible in principle, the 7,14-species was derived to be the most stable one by at least 48 kJ/mol.

---

Tautomerie und Stereochemie von Hypericin: Untersuchungen mit Hilfe der Kraftfeld-Methodik, NMR-Spektroskopie und Röntgenstrukturanalyse

Zusammenfassung Die Stereochemie von Hypericin, Pseudohypericin und einigen seiner Partialstrukturmodelle wurde mit Hilfe einer von MM2 abgeleiteten Kraftfeldmethodik untersucht. In der komplizierten Energiehyperfläche wurde neben dem auch durch Röntgenstrukturanalyse gefundenen Propeller-Konformeren ein neues Doppelschmetterling-Konformer ähnlicher Stabilität aufgefunden. Die obere Grenze für die Interkonversionsbarrieren zwischen diesen Konformeren und ihren Enantiomeren sind in der Größenordnung von 115 kJ/mol. Aus¹H-NMR-Experimenten konnte eine untere Grenze von wenigstens 80 kJ/mol abgeleitet werden. Es wurde gefunden, daß von den zehn prinzipiell möglichen Tautomeren die 7,14-Spezies die um wenigstens 48 kJ/mol stabilste ist.