Quinoprotein glucose dehydrogenase modified carbon paste electrode for the detection of phenolic compounds

The development of an amperometric biosensor for the determination of phenolic compounds is described, using quinoprotein glucose dehydrogenase. The enzyme is integrated into carbon paste and its ability to donate electrons to oxidized phenolic compounds during glucose oxidation is exploited. The sensor response is based on electrochemical oxidation of the phenolic compound followed by its enzymatic regeneration when the bulk solution contains glucose and the electrode is potentiostated at +500 mV (vs. Ag/AgCl/0.1 mol/L KCl). As the result of the catalytic analyte regeneration the electrodes offer very sensitive measurements of redox species like p-aminophenol and hydroquinone and catecholamines such as epinephrine, norepinephrine, and dopamine. The sensor performance is characterized for the different substrates. Highest sensitivity is achieved for p-aminophenol which could be determined at sub-nanomolar level.     

trans-Bis-[(−)ephedrinate]-palladium complex: synthesis, molecular modeling and use as catalyst

The reaction between palladium acetate, (−)-ephedrine and potassium acetate led to bis-chelate complex Pd[OCH(Ph)NH(Me)]₂ whose the trans-structure is obtained from calculations. The use of this complex to catalyze either the 1,4-hydrogenation of (E)-2-benzyliden-1-tetralone or Heck reaction of phenyl iodide with 3-methyl-3-buten-2-ol led to a low enantiomeric excess.     

Lipase surface diffusion studied by fluorescence recovery after photobleaching

We have analyzed surface diffusion properties of a variant of Thermomyces lanuginosa lipase (TLL) on hydrophilic silica and silica methylated with dichlorodimethylsilane (DDS) or octadecyltrichlorosilane (OTS). For this study a novel method for analysis of diffusion on solid surfaces was developed. The method is based on fluorescence recovery after photobleaching using confocal microscopy. When a rectangular area of the sample was photobleached, fluorescence recovery could be analyzed as one-dimensional diffusion, resulting in simplified mathematical expressions for fitting the data. The method was initially tested by measuring bovine serum albumin diffusion on glass, which led to a diffusion coefficient in good correspondence to earlier reports. For the analysis of TLL diffusion, ellipsometry data of TLL adsorption were used to calibrate fluorescence intensity to surface density of lipase, enabling measurements of the diffusion coefficient at different surface densities. The average diffusion coefficient was calculated in two time intervals after adsorption. Mobile fraction and diffusion coefficient were lowest on the OTS surface, when extrapolated to infinite surface dilution. Moreover, the diffusion rate decreased with time on the hydrophobic surfaces. Our observations can be explained by the surface dependence on the distribution of orientations and conformations of adsorbed TLL, where the transition from the closed to the catalytically active open and more hydrophobic structure is important.     

The effect of carbon dioxide on xylose fermentation byPichia stipitis

Carbon dioxide was found to reduce the xylose fermentation rate of two different strains ofPichia stipitis (CBS 5773 and CBS 5776) significantly in anaerobic batch fermentations. The maximum specific fermentation rate in a carbon dioxide atmosphere was about 45% lower than the fermentation rate in nitrogen atmosphere. Further-more, the fermentation rate was found to be correlated to the growth rate. It is probable that the carbon dioxide influences the fermentation rate partly through decreasing the growth rate. It was also found that the fermentation rate of CBS 5773 was higher than for CBS 5776 and that the specific fermentation rate was lower at a higher cell density.     

The complete 51V MAS NMR spectrum of surface vanadia nanoparticles on anatase (TiO2): vanadia surface structure of a DeNOx catalyst

The first observations of the complete manifold of spinning sidebands (ssbs) including both the central and satellite transitions in (51)V MAS NMR spectra of surface vanadia nanoparticles on titania in DeNO(x) catalysts are presented. (51)V quadrupole coupling and chemical shift anisotropy parameters for the dominating vanadia structure are determined from (51)V MAS NMR spectra recorded at 9.4 and 14.1 T. Based on correlations previously established between (51)V NMR parameters and crystal structure data for inorganic vanadates, the NMR data are consistent with vanadium in a distorted octahedral oxygen coordination environment for the so-called strongly bonded vanadia species on the surface. The investigation includes two vanadia-titania model catalysts and six industrial-type DeNO(x) catalysts.     

Optimization of a sodium ion-selective electrode for use in serum measurements

A sodium ion-selective polymeric membrane electrode has been optimized, especially with reference to serum measurements. For a given combination of polymer and ligand, the choice of membrane solvent is critical. Potentiometric measurements and electrodialysis experiments have shown that the dielectric constant and solubility parameter of the solvent influence the electrode selectivities, stability, slope and limit of detection. For use in serum measurements, it is essential to use an appropriate analytical technique, such as Flow Injection Analysis, which permits exposures to serum for only short periods of time.     

Component reconstruction in the primary space of spectra and concentrations. Alternating regression and related direct methods

A set of methods that extract the spectral components in a chromatographic run is considered. The methods do not need libraries of previously known spectra or retention times. The methods have been developed for two-dimensional spectra but they can also be used for chromatographic analyses with a single-channel detector. The methods are direct; they do not use principal components as the starting point. Alternating regression (AR) remains in the primary space of spectra and concentrations during the calculations. Random numbers are used as the starting spectra. Regression is used to solve first for the concentrations, then for the spectra. The method uses two kinds of constraints: all spectra and concentrations are forced to be positive; and all concentration profiles are forced to a unimodal shape with a single local maximum. It is assumed that all observations are a linear sum of components. Compact alternating regression (CAR) is a new variant of the basic AR. The idea is to replace multiplication of a large matrix by two multiplications of smaller matrices. This typically speeds up the iterations by a factor of ten. AR and CAR have been successfully used with combined techniques such as gas chromatography—mass spectrometry and liquid chromatography with UV—visible detection. The reliability of the solution is checked by repeatedly injecting noise and performing the analysis several times. This produces estimates of confidence intervals. AR and CAR have recently been extended to handle single-dimensional signals. Examples are single-channel detectors such as the flame ionization detector in gas or liquid chromatography with a fixed-wavelength UV detector. A batch of samples is used as the observation matrix. As a result, one obtains both the concentrations and the elution shapes of individual chromatographic peaks.