Templated ceramic microstructures by using the breath-figure method

We describe the synthesis of two cyclobutadiene(cyclopentadienyl)cobalt-containing poly(p-phenylene ethynylene)s (PPEs) and their use as precursors for stable ceramic surface coatings. Organometallic PPEs were shaped into hexagonally ordered assemblies by using the breath-figure method. Such breath figures can be washed away with an appropriate solvent. Upon pyrolysis at 500 degrees C under either nitrogen or air, the bubble arrays persist as ceramics and are insoluble in organic solvents or water. The formed pyrolyzed bubble arrays were analyzed by optical and scanning electron microscopy, as well as energy dispersive X-ray microanalysis (EDX). The composition of the ceramic materials is discussed based on EDX and IR data.     

Nonspecific interactions of a carboxylate-substituted PPE with proteins. A cautionary tale for biosensor applications

Two carboxylate-substituted, fluorescent (Phi = 0.08), water-soluble poly(p-phenyleneethynylene)s (PPE) and a water-soluble model compound were exposed to a series of proteins and bovine serum. While the anionic PPEs do not have any specific binding sites, they form stable complexes with histone, lysozyme, myoglobin, and hemoglobin. The complex formation was evidenced by fluorescence quenching. Bovine serum albumin does not quench the fluorescence of the PPEs but enhances it, probably due to its surfactant character. These results imply that the use of charged conjugated polymers as biosensors, while an attractive proposition, has to take into account strong nonspecific interactions between conjugated polymers and the host of proteins that is found in cells and complex biological fluids.     

Über Oxotantalate der Lanthanide des Formeltyps MTaO4 (M = La – Nd,Sm – Lu)

About Lanthanide Oxotantalates with the Formula MTaO₄ (M = La – Nd, Sm – Lu) Besides being a by‐product of solid state syntheses in tantalum ampoules the lanthanide(III) oxotantalates of the formula MTaO₄ can be easily prepared by sintering lanthanide sesquioxide M₂O₃ and tantalum(V) oxide Ta₂O₅ with sodium chloride as flux. Under these conditions two structure types emerge depending upon the M³⁺ cationic radius. For M = La – Pr the MTaO₄‐type tantalates crystallize in the space group P2₁/c with lattice constants of a = 762(±1), b = 553(±4), c = 777(±4) pm, β = 101(±1)° and four formula units per unit cell. With M = Nd, Sm – Lu, the monoclinic cell dimensions (space group P2/c) shrink to the lattice constants like a = 516(±9), b = 551(±9), c = 534(±9) pm, β = 96.5(±0.3)° and there are only two formula units present. Both structures show a coordination sphere of eight oxygen atoms for the lanthanide trications shaped as distorted square antiprism for the structure with the larger lanthanides (in the following referred to as A‐type) and as trigonal dodecahedron for the structure with the smaller ones (called as B‐type in the following). The coordination environment about the Ta⁵⁺ cations can be described as a slightly distorted octahedron (CN = 6) for the A‐type structure of MTaO₄ and a heavily distorted one (CN = 6) for the B‐type. The difference between the two types results from the interconnection of these [TaO₆]^7? octahedra. Whereas they are connected via four vertices to form corrugated layers according to parallel the bc‐plane in the A‐type, the octahedra of the B‐type MTaO₄ structure share edges to built up zig‐zag chains along the c axis.     

Cyclodimers and Cyclotrimers of 2,3 -Bisalkynylated Anthracenes,Phenazines and Diazatetracenes

The synthesis of novel (N−)acene-based cyclooligomers is reported. Glaser-Hay coupling of the bisethynylated monomers results in cyclodimers and cyclotrimers that are separable by column and gel-permeation chromatographies. For the diazatetracene, the use of sec-butyl-silylethynyl groups is necessary to achieve solubility. Diazatetracene-based cyclodimers and cyclotrimers were used as semiconductors in thin-film transistors. Although their optoelectronic properties are quite similar, their electron mobilities in proof-of-concept thin-film transistors differ by an order of magnitude.     

Thiadiazolo-Azaacenes

This work reports the synthesis and characterization of bis- and tetrakis(thiadiazolo)-appended di- and tetraazaacenes, displaying up to seven catenated benzene/pyrazine rings. The targets are obtained by condensation of benzo-bis(thiadiazole)-4,5-dione with aromatic di- and tetraamines. The condensation products—up to a heptacene-like species—are stable but can be insoluble. Soluble derivatives are readily processible, but do not show enhanced electron affinities, as the two or four attached benzothiadiazole units are effectively resonance-separated from the acene body, maximizing the number of Clar-sextets.     

Helical Ullazine-Quinoxaline-Based Polycyclic Aromatic Hydrocarbons

Polycyclic aromatic azomethine ylides (PAMYs) are powerful building blocks in the bottom-up synthesis of internally nitrogen-containing polycyclic aromatic hydrocarbons (N-PAHs) through 1,3-cycloaddition reactions. In this work, the cycloaddition reaction of PAMYs to asymmetric ortho-quinones is presented, which, in contrast to the addition to symmetric para-quinones, facilitates subsequent condensation reactions and allows the synthesis of three helical N-PAHs with ullazine-quinoxaline ( UQ - 1 – 3 ) backbones. UQ - 1 and UQ - 2 possess two helical centers; however, single-crystal X-ray analysis together with the computational modeling of UQ - 3 elucidate the formation of only the thermodynamically most stable geometry with four helical centers in a (P,P,M,M) configuration. For the series UQ - 1 – 3 , the number of redox steps is directly correlated with the number of ullazine or quinoxaline units incorporated into the targeted molecular backbones. A detailed investigation of the spectroscopic and magnetic properties of the radical cation and anion as well as the dication and dianion species by in situ EPR/UV/Vis-NIR spectroelectrochemistry is provided. The excellent optical and redox properties combined with helical geometries render them possibly applicable as chiral emitter or ambipolar charge transport material in organic electronics.     

Crosslinking Super Yellow to produce super OLEDs: Crosslinking with azides enables improved performance

An increasing number of organic light-emitting diodes (OLEDs) is nowadays based on the use of polymers as the emissive material. For this material class in particular, solution-processing of the OLEDs has gained traction in both research and industry. However, in order to access multilayer material systems, orthogonal solvents must be used to prevent dissolution of previously prepared layers. The use of crosslinkers can facilitate this production method by reducing the number of orthogonal solvents needed since insoluble networks are generated. In this work, a novel bisazide crosslinker is employed to insolubilize Super Yellow, a polyphenylene-vinylene emitter. This allows the use of an additional poly[bis(4-phenyl)(2,4,6-trimethylphenyl)amine electron blocking layer (EBL) from the same solvent. Devices including the blocking layer show improved efficacies compared to reference devices without the additional EBL, while also maintaining the emission spectrum. Using the upscalable technique of doctor blading, OLEDs were fabricated which showed a particularly noticeable effect of the blocking layer with a nearly twofold increase in luminance and a 56% increase in current efficacy.