On-line coupled liquid chromatography-gas chromatography

On-line coupled liquid chromatography–gas chromatography (LC–GC) is a powerful technique that combines the best features of LC and GC and is ideal for the analysis of complex samples. This review describes the unique features of on-line coupled LC–GC. The different interfaces and evaporation techniques are presented, along with their advantages and disadvantages. Guidelines are given for selecting a suitable LC–GC technique and representative applications are noted.     

Determination of organic compounds from wood combustion aerosol nanoparticles by different gas chromatographic systems and by aerosol mass spectrometry

Organic compounds in atmospheric nanoparticles have an effect on human health and the climate. The determination of these particles is challenged by the difficulty of sampling, the complexity of sample composition, and the trace-level concentrations of the compounds. Meeting the challenge requires the development of sophisticated sampling systems for size-resolved particles and the optimization of sensitive, accurate and simple analytical techniques and methods. A new sampling system is proposed where particles are charged with a bipolar charger and size-segregated with a differential mobility analyzer. This system was successfully used to sample particles from wood pyrolysis with particle sizes 30–100 nm. Particles were analyzed by four techniques: comprehensive two-dimensional gas chromatography–time-of-flight mass spectrometry, gas chromatography–time-of-flight mass spectrometry, gas chromatography–quadrupole mass spectrometry, and aerosol mass spectrometry (aerosol MS). In the chromatographic techniques, particles were collected on a filter and analyzed off-line after sample preparation, whereas in the aerosol MS, particle analysis was performed directly from the particle source. Target compounds of the samples were polyaromatic hydrocarbons and n-alkanes. The analytical techniques were compared and their advantages and disadvantages were evaluated. The sampling system operated well and target compounds were identified in low concentrations.     

Sorbent- and liquid-phase microextraction techniques and membrane-assisted extraction in combination with gas chromatographic analysis: A review

Approaches are described for on-line and off-line sample pretreatment of liquid samples utilising liquid- and adsorbent- and sorbent-phase microextraction methodologies with GC analysis. Solid-phase microextraction (SPME), stir-bar sorptive extraction (SBSE), on-line solid-phase extraction (SPE), liquid-phase microextraction (LPME) and membrane-assisted methods are critically evaluated and the applicability of each technique is demonstrated with examples.     

Critical evaluation of sample pretreatment techniques

Sample preparation before chromatographic separation is the most time-consuming and error-prone part of the analytical procedure. Therefore, selecting and optimizing an appropriate sample preparation scheme is a key factor in the final success of the analysis, and the judicious choice of an appropriate procedure greatly influences the reliability and accuracy of a given analysis. The main objective of this review is to critically evaluate the applicability, disadvantages, and advantages of various sample preparation techniques. Particular emphasis is placed on extraction techniques suitable for both liquid and solid samples. Figure Miniaturised extraction techniques allow sensitive analysis of also small sample volumes.     

Comprehensive two-dimensional liquid chromatography-time-of-flight mass spectrometry in the analysis of acidic compounds in atmospheric aerosols

A novel method utilising comprehensive two-dimensional liquid chromatography interfaced to electrospray ionisation time-of-flight mass spectrometry was developed for the determination of organic acids in atmospheric aerosols. The system was applied to the analysis of methanolic extracts of filters from a high volume sampler. The enhanced separation power of two-dimensional separation was demonstrated in the analysis of both rural and urban samples. Quantification was performed for compounds for which standards were available. Limit of detection was 2-200ng/ml. Average reproducibility of retention times in each dimensions was 0.1%, and average reproducibility of peak areas was 8% (10mug/ml, n=3).     

Comparison of different trapping methods for pressurised hot water extraction

Four trapping methods for pressurised hot water extraction were compared in terms of recovery and selectivity. Also, robustness, repeatability and solvent consumption of the trapping systems were investigated. The trapping methods were collection into solvent following liquid-liquid extraction, solid-phase trapping into Tenax TA (SPE), flat sheet microporous membrane liquid-liquid extraction and hollow fibre microporous membrane liquid-liquid extraction. Polycyclic aromatic hydrocarbons were extracted with these systems from four soil and sediment matrices and the extracts were analysed by GC-MS and size-exclusion chromatography. Clear differences were observed in the selectivity and extraction efficiencies of the trapping systems.     

Approaches for on-line coupling of extraction and chromatography

This review provides an overview of the approaches available in order to perform on-line coupling of various extraction techniques with liquid and gas chromatography, for the analysis of semivolatile and nonvolatile analytes in liquid and solid samples. The main focus is on the instrumental set-up of these techniques. Selected real applications are described by way of illustration. The extraction methods suitable for on-line coupling covered in this review are: liquid-liquid extraction, solid-phase extraction, membrane-based techniques, pressurised liquid extraction, supercritical fluid extraction, and microwave- and sonication-assisted extractions. The following systems are not covered in this review: on-line coupled solid-phase extraction-liquid chromatography, purge-and-trap-GC, and membrane extraction with a sorbent interface-GC.Abbreviations DMAE Dynamic microwave-assisted extraction - DSAE Dynamic sonication-assisted extraction - FIA Flow injection analysis - FID Flame ionisation detection - GC Gas chromatography - HGAAS Hydride generation atomic absorption spectroscopy - IC Ion chromatography - IPLC Ion pair liquid chromatography - LC Column liquid chromatography - LLE Liquid-liquid extraction - LVI Large-volume injection - MAE Microwave-assisted extraction - MESI Membrane extraction with a sorbent interface - MMLLE Microporous membrane liquid-liquid extraction - MS Mass spectrometry - NP Normal-phase - OTT Open-tubular trapping - OTTTD Open-tubular trapping with thermal desorption - PAH Polycyclic aromatic hydrocarbon - PHWE Pressurised hot water extraction - PCB Polychlorinated biphenyl - PLE Pressurised liquid extraction - PTV Programmed-temperature vaporizer - RP Reversed-phase - RSD Relative standard deviation - SAE Sonication-assisted extraction - SFE Supercritical fluid extraction - SIM Selective ion monitoring - SLM Supported liquid membrane - SPE Solid-phase extraction - SPE-TD Solid-phase extraction-thermal desorption - SVE Solvent vapour exit - TD Thermal desorption     

1H NMR spectral analysis and conformational behavior of n‐alkanes in different chemical environments

Alkyl chains are common structural units, for example in lipids, and their ¹H NMR spectral parameters offer valuable information about their conformational behavior in solvent environment. Even the spectra of short n‐alkanes are complex, which is obviously a reason why their accurate spectral analyses have not been reported before. The present study reports the quantum mechanical analysis of ¹H NMR spectra of n‐butane, n‐pentane, n‐hexane, and n‐heptane. The spectral parameters were used to characterize the conformational behavior of n‐alkanes. The temperature dependence analysis of coupling constants suggests that the enthalpy difference between the gauche (g) and trans (t) conformations (ΔH_g) of n‐butane in chloroform is 2.55–2.85 kJ mol^?1. The difference between the trans–gauche (tg) and all‐trans (tt) conformers of n‐pentane (ΔH_tg) seems to be 0.1–0.2 kJ mol^?1 higher. The coupling constant information shows that the t_n conformations become more favored with longer chains, although not only for energetic reasons but also partly because the g⁺g^‐ arrangements become sterically unfavorable, which decreases the number of favorable g_n‐type conformations. The analysis of the ¹H NMR spectra of n‐pentane and n‐hexane in solvents representing different chemical environments indicates that polar and spherical dimethyl sulfoxide favors clearly the g conformations, whereas n‐hexane‐d₁₄ favors slightly the extended t_n conformation. In addition to the intrinsic scientific importance for NMR spectral parameter prediction and molecular modeling in solution, the results provide some insights to behavior of hydrocarbon chains and their spectra in different chemical environments. Copyright © 2012 John Wiley & Sons, Ltd.     

Semi-rotating cryogenic modulator for comprehensive two-dimensional gas chromatography

A laboratory-made cryogenic modulator for comprehensive two-dimensional gas chromatography (GCxGC) was constructed and evaluated. Analytes were trapped with carbon dioxide and desorbed with heated GC oven air. The GCxGC system included a non-polar first-dimension column and a semi-polar second-dimension column connected to a flame ionisation detector. A laboratory-written Matlab-based program was used for the data analysis. Peak widths at half height for n-alkanes, obtained with use of new modulator, were at narrowest 60 ms.