Microwave promoted methylation of plant polysaccharides

O-Methylation is of outstanding importance in structural polysaccharide chemistry. A novel method for the methylation of polysaccharides using microwave (MW) irradiation is described. Seed gum from Cyamopsis tetragonolobus (Guar) was fully methylated with dimethyl sulphate and sodium hydroxide using 100% microwave power for 4 min in 68% yield. The completely methylated seed gum thus obtained was hydrolyzed by 70% formic acid followed by 0.5N H₂SO₄ under full microwave power for 1.16 and 1.66 min, respectively. The partially methylated monosaccharides were separated and identified.     

Observation of Slow Relaxation and Single‐Molecule Toroidal Behavior in a Family of Butterfly‐Shaped Ln4 Complexes

A family of five isostructural butterfly complexes with a tetranuclear [Ln₄] core of the general formula [Ln₄(LH)₂(μ₂‐η¹η¹Piv)(η²‐Piv)(μ₃‐OH)₂]?x H₂O?y MeOH?z CHCl₃ ( 1 : Ln=Dy^III, x=2, y=2, z=0; 2 : Ln=Tb^III, x=0, y=0, z=6; 3 : Ln=Er^III, x=2, y=2, z=0; 4 : Ln=Ho^III, x=2, y=2, z=0; 5 : Ln=Yb^III, x=2, y=2, z=0; LH₄=6‐{[bis(2‐hydroxyethyl)amino]methyl}‐N′‐(2‐hydroxy‐3‐methoxybenzylidene)picolinohydrazide; PivH=pivalic acid) was isolated and characterized both structurally and magnetically. Complexes 1 – 5 were probed by direct and alternating current (dc and ac) magnetic susceptibility measurements and, except for 1 , they did not display single‐molecule magnetism (SMM) behavior. The ac magnetic susceptibility measurements show frequency‐dependent out‐of‐phase signals with one relaxation process for complex 1 and the estimated effective energy barrier for the relaxation process was found to be 49 K. We have carried out extensive ab initio (CASSCF+RASSI‐SO+SINGLE_ANISO+POLY_ANISO) calculations on all the five complexes to gain deeper insights into the nature of magnetic anisotropy and the presence and absence of slow relaxation in these complexes. Our calculations yield three different exchange coupling for these Ln₄ complexes and all the extracted J values are found to be weakly ferro/antiferromagentic in nature (J₁=+2.35, J₂=?0.58, and J₃=?0.29 cm^?1 for 1 ; J₁=+0.45, J₂=?0.68, and J₃=?0.29 cm^?1 for 2 ; J₁=+0.03, J₂=?0.98, and J₃=?0.19 cm^?1 for 3 ; J₁=+4.15, J₂=?0.23, and J₃=?0.54 cm^?1 for 4 and J₁=+0.15, J₂=?0.28, and J₃=?1.18 cm^?1 for 5 ). Our calculations reveal the presence of very large mixed toroidal moment in complex 1 and this is essentially due to the specific exchange topology present in this cluster. Our calculations also suggest presence of single‐molecule toroics (SMTs) in complex 2 . For complexes 3 – 5 on the other hand, the transverse anisotropy was computed to be large, leading to the absence of slow relaxation of magnetization. As the magnetic field produced by SMTs decays faster than the normal spin moments, the concept of SMTs can be exploited to build qubits in which less interference and dense packing are possible. Our systematic study on these series of Ln₄ complexes suggest how the ligand design can help to bring forth such SMT characteristics in lanthanide complexes.     

Adsorption of Hg(II) Ions onto Binary Biopolymeric Beads of Carboxymethyl Cellulose and Alginate

The removal of Hg(II) ions from aqueous solution by adsorption onto cross-linked polymeric beads of carboxymethyl cellulose (CMC) and sodium alginate was studied at fixed pH (6) and room temperature 28 ± 0.2°C. The cross-linked polymeric beads were characterized by FTIR spectra. Sorption capacity of the polymer for the mercury ions was investigated in aqueous media consisting different amounts of mercury ions (2.5 to 100 mg dm^?3) and at different pH values (2 to 8). Adsorption behavior of Hg(II) ions could be modeled using both the Langmuir and Freundlich isotherms. The dynamic nature of adsorption was quantified in terms of several kinetic constants such as rate constants for adsorption (k₁) and Lagergreen rate constant (K_ad). The influence of various experimental parameters such as effect of pH, contact time, solid-to-liquid ratio, salt effect, and temperature effect etc. were investigated on the adsorption of Hg(II) ions.     

Bis(2-(1H-imidazol-2-yl)-pyridine)copper(II): Effects of counteranions on the molecular and supramolecular structures

The synthesis and physical properties of bis(2-(1H-imidazol-2-yl)-pyridine)copper(II) with chloride, nitrate and perchlorate as counteranions have been described. Microanalysis, magnetic susceptibility, conductivity and various spectroscopic measurements have been used for the characterization of the complexes. The crystal structures of all three complexes have been determined. Intermolecular hydrogen-bonding interactions and the resulting self-assembly patterns for each of the species have been scrutinized. The chloride containing complex crystallizes as a trihydrate, where the metal ion is in a tetragonally elongated cis-N₄Cl₂ coordination sphere. This complex provides a three-dimensional honeycomb-like structure through N–H?Cl, O–H?Cl and O–H?O hydrogen bonds. In the nitrate containing species, one of the two counteranions coordinates to the metal centre to provide an irregular N₄O₂ coordination sphere, while the other counteranion, with the help of a lattice water molecule, assembles a ladder-like structure via N–H?O and bifurcated O–H?O,O hydrogen bonds. A one-dimensional polymeric species has been formed when perchlorate is the counteranion. Here one of the two perchlorates acts as a bridge between the metal centres that are in tetragonally elongated trans-N₄O₂ coordination spheres. This polymeric chain, together with the second perchlorate and a water molecule, form a ribbon-like structure due to N–H?O and O–H?O hydrogen bonds.     

Production lot sizing with process deterioration and machine breakdown

The paper presents a generalized economic manufacturing quantity model for an unreliable production system in which the production facility may shift from an ‘in-control’ state to an ‘out-of-control’ state at any random time (when it starts producing defective items) and may ultimately break down afterwards. If a machine breakdown occurs during a production run, then corrective repair is done; otherwise, preventive repair is performed at the end of the production run to enhance the system reliability. The proposed model is formulated assuming that the time to machine breakdown, corrective and preventive repair times follow arbitrary probability distributions. However, the criteria for the existence and uniqueness of the optimal production time are derived under general breakdown and uniform repair time (corrective and preventive) distributions. The optimal production run time is determined numerically and the joint effect of process deterioration, machine breakdowns and repairs (corrective and preventive) on the optimal decisions is investigated for a numerical example.     

Magnetic Relaxation in Single‐Electron Single‐Ion Cerium(III) Magnets: Insights from Ab Initio Calculations

Detailed ab initio calculations were performed on two structurally different cerium(III) single‐molecule magnets (SMMs) to probe the origin of magnetic anisotropy and to understand the mechanism of magnetic relaxations. The complexes [Ce^III{Zn^II(L)}₂(MeOH)]BPh₄ ( 1 ) and [Li(dme)₃][Ce^III(cot′′)₂] ( 1 ; L=N,N,O,O‐tetradentate Schiff base ligand; 2 ; DME=dimethoxyethane, COT′′=1,4‐bis(trimethylsilyl)cyclooctatetraenyldianion), which are reported to be zero‐field and field‐induced SMMs with effective barrier heights of 21.2 and 30 K respectively, were chosen as examples. CASSCF+RASSI/SINGLE_ANISO calculations unequivocally suggest that m_J|±5/2〉 and |±1/2〉 are the ground states for complexes 1 and 2 , respectively. The origin of these differences is rooted back to the nature of the ligand field and the symmetry around the cerium(III) ions. Ab initio magnetisation blockade barriers constructed for complexes 1 and 2 expose a contrasting energy‐level pattern with significant quantum tunnelling of magnetisation between the ground state Kramers doublet in complex 2 . Calculations performed on several model complexes stress the need for a suitable ligand environment and high symmetry around the cerium(III) ions to obtain a large effective barrier.     

Degree of approximation of functions in the Hölder metric by (e,c) means

Degree of approximation of functions by the (e, c) means of its Fourier series in the Hölder metric is studied.     

Anodic Synthesis of New Benzofuran Derivatives Using Active Methylene Group at Platinum Electrode

A facile and Eco-compatible synthesis of benzofuran derivatives (4a–4h) has been carried out at platinum electrode by electrochemical oxidation of catechol in the presence of active methylene groups. Electro- organic synthesis has been performed in an undivided cell at ambient conditions. The products of electrolysis have been purified and characterized by FTIR, ¹H NMR and ¹³C NMR and mechanism was deduced by voltammetric studies.     

RAPTA complexes containing N‐substituted Tetrazole scaffolds: Synthesis,characterization and Antiproliferative activity

This work describes the synthesis of a series of Ru(II)‐Arene (Arene=p‐cymene, benzene) complexes using different N‐substituted tetrazole ligands and their PTA analogues. All the complexes have been characterized thoroughly using different analytical techniques. Antiproliferative activity of the synthesized complexes against different cell lines indicates remarkable activity of certain complexes up to nanomolar level. In few cases introduction of water soluble PTA (PTA = 1,3,5‐ triaza‐7‐phospha‐tricyclo‐[3.3.1.1]decane) ligand induce significant cytotoxic activity in the ruthenium complex with respect to their chloro analogues, particularly against Jurkat and MCF‐7 cell lines. Interaction with different biomolecules and stability of the RAPTA complexes have been explored in pseudo‐pharmacological conditions.