Calibrating software reliability models when the test environment does not match the user environment

Software failures have become the major factor that brings the system down or causes a degradation in the quality of service. For many applications, estimating the software failure rate from a user's perspective helps the development team evaluate the reliability of the software and determine the release time properly. Traditionally, software reliability growth models are applied to system test data with the hope of estimating the software failure rate in the field. Given the aggressive nature by which the software is exercised during system test, as well as unavoidable differences between the test environment and the field environment, the resulting estimate of the failure rate will not typically reflect the user‐perceived failure rate in the field. The goal of this work is to quantify the mismatch between the system test environment and the field environment. A calibration factor is proposed to map the failure rate estimated from the system test data to the failure rate that will be observed in the field. Non‐homogeneous Poisson process models are utilized to estimate the software failure rate in both the system test phase and the field. For projects that have only system test data, use of the calibration factor provides an estimate of the field failure rate that would otherwise be unavailable. For projects that have both system test data and previous field data, the calibration factor can be explicitly evaluated and used to estimate the field failure rate of future releases as their system test data becomes available. Copyright © 2002 John Wiley & Sons, Ltd.     

Rheological and physical properties of aliphatic hyperbranched polyesters

The effects of the size (pseudo‐generation number) and nature of end groups on physical and rheological properties were investigated for a series of hyperbranched polyesters based on an ethoxylated pentaerythritol core and 2,2‐bis‐(hydroxymethyl)propionic acid repeat units. The observed linear dependence of the melt viscosity on the molar mass in the high pseudo‐generation‐number limit indicated that entanglement effects were substantially absent. Moreover, the marked influence of end capping of the end groups on the physical and rheological properties suggested that intermolecular interactions were dominated by contacts between the outer shells of the molecules, in which the end groups were assumed to be concentrated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1218–1225, 2004     

Annealing effect on soft magnetic properties and magnetoimpedance of Finemet Fe73.5Si13.5B9Nb3Au1 alloy

Effect of annealing on the soft magnetic properties of Fe_73.5Si_13.5B₉Nb₃Au₁ amorphous ribbon has been investigated by means of structure examination, magnetoimpedance ratio (MIR) and incremental permeability ratio (PR) spectra measured in the frequency range of 1–10 MHz at a fixed current of 10 mA X-ray diffraction analysis showed that the as-cast sample was amorphous and it became nanocrystalline under a proper heat treatment. When annealing amorphous alloy at 530 °C for 30, 60, 90 min, soft magnetic properties have been improved drastically. Among the samples investigated, the sample annealed at 530 °C for 90 min showed the softest magnetic behavior. The MIR and PR curves revealed the desirable changes in anisotropy field depending upon annealing.     

Effect of the subdivision strategy on convergence and efficiency of some global optimization algorithms

We investigate subdivision strategies that can improve the convergence and efficiency of some branch and bound algorithms of global optimization. In particular, a general class of so called weakly exhaustive simplicial subdivision processes is introduced that subsumes all previously known radial exhaustive processes. This result provides the basis for constructing flexible subdivision strategies that can be adapted to take advantage of various problem conditions.     

Renormalization Effects in the Spectrum of a Coherently Driven Exciton–Biexciton System

Starting from the total Hamiltonian of an excited exciton–biexciton system, nonresonant renormalizations in the electronic spectrum of a coherently driven direct semiconductor are considered. Stringent group-theoretical inclusion of the particle spin in the Hamiltonian allows one to account for the dependence of different renormalization effects on polarizations of the incident laser fields. On the example of circularly polarized driving and probing pulses it is shown that the kind of observed renormalization is defined by the pump-and-probe polarization geometry. Thus, the exciton optical Stark effect must appear in the case of co-circular pump-and-probe, whereas a mixing of the polariton and biexciton spectra is possible only in the case of counter-circular pump-and-probe. The polariton--biexciton dispersion renormalization may manifest itself as synchronous splittings of the exciton--polariton and biexciton spectra under resonant pumping at a frequency of the polariton--biexciton transition, or in their shifts in opposite directions under near-resonant pumping. The mechanisms of both kinds of renormalization effects are analyzed, and the dependence of their characteristics on the pump parameters and microscopic parameters of the exciton–biexciton–photon system is established. An evaluation of the characteristics shows that the effect of polariton–biexciton dispersion renormalization dominates in the spectra of semiconductors with stable biexciton formation. Results of the theoretical study provide an adequate explanation of available experimental data.     

A tight upper bound for the number of intersections between two rectangular paths

The problem of finding the number of intersections between two geometric figures in the plane has been studied extensively in literature. In this paper, the geometric figure comprising a continuous rectilinear path (called rectangular path) is considered, and a tight (least) upper bound onI(P, Q), the number of intersections between two rectangular pathsP andQ, is given.Editors' Note: One of our referees has reported that the main result of this paper has recently been given independently by a Chinese researcher at the University of Science and Technology, Hefei, P. R. of China. His paper is under publication in the Chinese Science Bulletin. However, since this journal may not be easily accessible to our readers, and further the two papers are obviously independent of each other, theBIT Editors have decided to accept the present paper.     

Synthesis and characterization of norbornene–ethylene–styrene terpolymers with a substituted ansa‐fluorenylamidodimethyltitanium‐based catalyst

This article reports a synthetic method for a norbornene–ethylene–styrene (N‐E‐S) terpolymer, which has not been well investigated so far, via incorporation of styrene (S) into vinyl‐type norbornene–ethylene (N‐E) copolymers catalyzed by a substituted ansa‐fluorenylamidodimethyltitanium [Me₂Si(3,6‐tBu₂Flu)(tBuN)]TiMe₂ catalyst ( I ) activated with a [Ph₃C][B(C₆F₅)₄]/Al(iBu)₃ cocatalyst at room temperature in toluene. The resulting terpolymerization product contained the targeted N‐E‐S terpolymer and the contaminated homopolymers, which were then able to be completely removed by solvent fractionation techniques. While homopolystyrene was easily extracted by fractionation with methylethylketone as a soluble part, homopolyethylene and a trace amount of homopolynorbornene could be perfectly separated by fractionation with chloroform as insoluble parts. The detail characterizations of a chloroform‐soluble polymer with gel permeation chromatography, nuclear magnetic resonance, and differential scanning calorimetry analyses proved that it contained a true N‐E‐S terpolymer with long N‐E sequences incorporated with isolated or short styrene sequences. The homogeneity of the morphology together with a single glass transition temperature that proportionally decreased with the increase of the styrene contents indicated that the N‐E‐S terpolymer obtained in this work is a random polymer with an amorphous structure. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2765–2773, 2007     

Anticancer agent development: X-ray crystal structure and keto-enol tautomerism of dimethyl 1-hydroxy-6,7-methylenedioxy-4-(3′,4′,5′-trimethoxyphenyl-trans-3,4-dihydronaphthalene-2,3-dicarboxylate

Structural and conformational information obtained from the crystal structure and solution¹H nmr investigations of the title compound are compared. The 4-aryltetralone, C₂₄H₂₄O₁₀, crystallizes as a chloroform solvate in the monoclinic space group, P2₁/n, witha=12.519(4),b=17.938(6),c=12.534(9)Å,=111.90(5)°, and D_calc=1.51 g cm^–3 forZ=4. The data for this compound were collected at –150°C. Least-squares refinement of 2796 observed [F _o5(F _o)] reflections led to the final agreement index ofR=0.062. A threefold static disorder was observed for one of the carboxyl groups. The second carboxyl group participates in an intramolecular hydrogen bond and is thus ordered. The¹H nmr spectrum revealed the title compound to exist as a keto-enol tautomeric mixture in solution. Vicinal hydrogen coupling constant analysis proved reliable in ascertaining B-ring stereochemistry of 2,3-disubstituted-4-aryltetralones.     

Multi-quark structure ofU(3.1)

We interpret the recently observedU(3.1) mesons with the \(\Lambda \bar p\) + pions decays as the bound state of \(\Lambda ,\bar p\) andX ₀(1480). TheX ₀(1480) is a mesonium with \(Q^2 \bar Q^2 \) structures observed in γγ reactions and \(\bar pn\) annihilations. With this interpretation, we can understand its decay modes. Furthermore, we predict the ratio of \(\sigma (\Lambda \bar p\pi ^ + \pi ^ - )/\sigma (\Lambda \bar p\pi ^ + \pi ^ + )\) to be ?3.1 for centrally produced events and that the width of \(U^ - (\Lambda \bar p\pi ^ + \pi ^ - )\) to be greater than that of \(U^ + (\Lambda \bar p\pi ^ + \pi ^ + )\) . Both predictions seem to be in reasonable accord with the available data. We call for the detection of the \(\Lambda \bar p\pi ^ - \pi ^ - \) mode to verify the present interpretation.     

Characteristics of π−,\bar p,and antinuclei frompp collisions

An investigation of inclusivepp→π^?+? in terms of the covariant Boltzmann factor (BF) including the chemical potential μ indicates a) that the temperatureT increases less rapidly than expected from Stefan's law, b) that a scaling property holds for the fibreball velocity of π^? secondaries, leading to a multiplicity law like ～E _cm ^1/2 at high energy, and c) that μ_π is related to the quark mass: μ_π=2m _q ?m _π the quark massm _q determined by \(T_{\pi ^ - } \) at \(\bar pp\) threshold beingm _q =3T_π?330 MeV. Because ofthreshold effects \(T_{\bar p}< T_{\pi ^ - } \) , whereas \({{\mu _p } \mathord{\left/ {\vphantom {{\mu _p } {\mu _{\pi ^ - } }}} \right. \kern-0em} {\mu _{\pi ^ - } }} \simeq {3 \mathord{\left/ {\vphantom {3 2}} \right. \kern-0em} 2}\) as expected from the quark contents of \(\bar p\) and π. The antinuclei \(\bar d\) and \({{\bar t} \mathord{\left/ {\vphantom {{\bar t} {\overline {He^3 } }}} \right. \kern-0em} {\overline {He^3 } }}\) observed inpp events are formed by coalescence of \(\bar p\) and \(\bar n\) produced in thepp collision. Semi-empirical formulae are proposed to estimate multiplicities of π^?, \(\bar p\) and antinuclei.