Compact, reliable asymmetric optical configuration for cost-effective fabrication of multiplex dot matrix hologram in anti-counterfeiting applications

This study presents a compact optical configuration that can generate a multiplex dot-matrix hologram with complex interlaced images for anti-counterfeiting applications on valuable paper. Varying the orientation of the interference plane can enable the multiplex hologram to be recorded without changing the interference angle of two laser beams. With its simple asymmetric optical setup, a multiplex hologram with many interlaced images can be efficiently fabricated, increasing the cost of imitation. Experimental details of the asymmetric optical setup are also described.     

Immiscibility,upper critical solution temperature,and miscibility in blends of poly(vinyl ether)s with polyacrylics: Effects of pendant groups

Various phase behavior of blends of poly(vinyl ether)s with homologous acrylic polymers (polymethacrylates or polyacrylates) were examined using differential scanning calorimetry, optical microscopy (OM), and Fourier‐transformed infrared spectroscopy. Effects of varying the pendant groups of either of constituent polymers on the phase behavior of the blends were analyzed. A series of interestingly different phase behavior in the blends has been revealed in that as the pendant group in the acrylic polymer series gets longer, polymethacrylate/poly(vinyl methyl ether) (PVME) blends exhibit immiscibility, upper critical solution temperature (UCST), and miscibility, respectively. This study found that the true phase behavior of poly(propyl methacrylate)/PVME [and poly(isopropyl methacrylate)/PVME)] blend systems, though immiscible at ambient, actually displayed a rare UCST upon heating to higher temperatures. Similarly, as the methyl pendant group in PVE is lengthened to ethyl (i.e., PVME replaced by PVEE), phase behavior of its blends with series of polymethacrylates or polyacrylates changes correspondingly. Analyses and quantitative comparisons on four series of blends of PVE/acrylic polymer were performed to thoroughly understand the effects of pendant groups in either polyethers (PVE's) or acrylic polymers on the phase behavior of the blends of these two constituents. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1521–1534, 2007     

Determination of Diuretics in Urine Using Immobilized Multi‐Walled Carbon Nanotubes in Hollow Fiber Liquid‐Phase Microextraction Combined with Liquid Chromatography‐Tandem Mass Spectrometry

A novel technique utilizing the adsorptive potential of immobilized multi‐walled carbon nanotubes (I‐MWCNT) in hollow fiber liquid‐phase microextraction (HF‐LPME) was developed for the determination of diuretics in urine. In this study, the potential of carbon nanotubes as a sorbent for three‐phase liquid‐phase microextraction of diuretics from urine samples was evaluated. Analysis was performed using liquid chromatography‐tandem mass spectrometry (LC‐MS/MS). A novel method was applied to detect acetazolamide (AAA), chlorothiazide (CTA), hydrochlorothiazide (HCT), hydroflumethiazide (HFT), clopamide (CA), trichlormethiazide (TCM), althiazide (AT) and bendroflumethiazide (BFT) in urine. Two‐step extractions using different times and temperatures for each step were adopted. Parameters influencing the extraction efficiency, including the extraction solvent, sample pH, salt concentration, extraction time and extraction temperature were systematically optimized. Under the resulting optimal extraction conditions, this method showed good linearity over an analytes concentration range of 1 to 1000 ng/mL, high extraction repeatability with relative standard deviations of less than 6%, and low detection limits (0.09 to 0.51 ng/mL). The application of the methods to the determination of diuretics in real samples was tested by analyzing urine samples of patient.     

An Antibody with a Variable‐Region Coiled‐Coil “Knob” Domain

The X‐ray crystal structure of a bovine antibody (BLV1H12) revealed a unique structure in its ultralong heavy chain complementarity determining region 3 (CDR3H) that folds into a solvent‐exposed β‐strand “stalk” fused to a disulfide crosslinked “knob” domain. We have substituted an antiparallel heterodimeric coiled‐coil motif for the β‐strand stalk in this antibody. The resulting antibody (Ab‐coil) expresses in mammalian cells and has a stability similar to that of the parent bovine antibody. MS analysis of H–D exchange supports the coiled‐coil structure of the substituted peptides. Substitution of the knob‐domain of Ab‐coil with bovine granulocyte colony‐stimulating factor (bGCSF) results in a stably expressed chimeric antibody, which proliferates mouse NFS‐60 cells with a potency comparable to that of bGCSF. This work demonstrates the utility of this novel coiled‐coil CDR3 motif as a means for generating stable, potent antibody fusion proteins with useful pharmacological properties.     

Stabilizing DNAzymes through Encapsulation in a Metal–Organic Framework

DNAzymes are a promising class of bioinspired catalyst; however, their structural instability limits their potential. Herein, a method to stabilize DNAzymes by encapsulating them in a metal–organic framework (MOF) host is reported. This biomimetic mineralization process makes DNAzymes active under a wider range of conditions. The concept is demonstrated by encapsulating hemin-G-quadruplex (Hemin-G4) into zeolitic imidazolate framework-90 (ZIF-90), which indeed increases the DNAzyme's structural stability. The stabilized DNAzymes show activities in the presence of Exonuclease I, organic solvents, or high temperature. Owing to its elevated stability and heterogeneous nature, it is possible to perform catalysis under continuous-flow conditions, and the DNAzyme can be reactivated in situ by introducing K⁺. Moreover, it is found that the encapsulated DNAzyme maintains its high enantiomer selectivity, demonstrated by the sulfoxidation of thioanisole to (S)-methyl phenyl sulfoxide. This concept of stabilizing DNAzymes expands their potential application in chemical industry.     

A new two‐phase structure‐preserving doubling algorithm for critically singular M‐matrix algebraic Riccati equations

Among numerous iterative methods for solving the minimal nonnegative solution of an M‐matrix algebraic Riccati equation, the structure‐preserving doubling algorithm (SDA) stands out owing to its overall efficiency as well as accuracy. SDA is globally convergent and its convergence is quadratic, except for the critical case for which it converges linearly with the linear rate 1/2. In this paper, we first undertake a delineatory convergence analysis that reveals that the approximations by SDA can be decomposed into two components: the stable component that converges quadratically and the rank‐one component that converges linearly with the linear rate 1/2. Our analysis also shows that as soon as the stable component is fully converged, the rank‐one component can be accurately recovered. We then propose an efficient hybrid method, called the two‐phase SDA, for which the SDA iteration is stopped as soon as it is determined that the stable component is fully converged. Therefore, this two‐phase SDA saves those SDA iterative steps that previously have to have for the rank‐one component to be computed accurately, and thus essentially, it can be regarded as a quadratically convergent method. Numerical results confirm our analysis and demonstrate the efficiency of the new two‐phase SDA. Copyright © 2015 John Wiley & Sons, Ltd.     

One-step synthesis of large-aspect-ratio single-crystalline gold nanorods by using CTPAB and CTBAB surfactants

Gold nanorods were prepared in high yields by using a one-step seed-mediated process in aqueous cetyltripropylammonium bromide (CTPAB) and cetyltributylammonium bromide (CTBAB) solutions in the presence of silver nitrate. The diameters of the nanorods range from 3 to 11 nm, their lengths are in the range of 15 to 350 nm, and their aspect ratios are in the range of 2 to 70. The diameters of the Au nanorods obtained from one growth batch in CTPAB solutions decrease as their lengths increase, and their volumes decrease as the aspect ratios increase. The diameters of the Au nanorods obtained from one growth batch in CTBAB solutions first decrease and then slightly increase as their lengths increase, and their volumes increase as the aspect ratios increase. These Au nanorods are single-crystalline and are seen to be oriented in either the [100] or [110] direction under transmission electron microscopy imaging, irrespective of their sizes. To the best of our knowledge, this is the first report of the preparation by using wet-chemistry methods of single-crystalline Au nanorods with aspect ratios larger than 15.     

Development of Materials for Blue Organic Light Emitting Devices

The success of organic light emitting diodes (OLED) has been witnessed by the commercialization of this technology for manufacturing the vivid and colorful displays used in our daily life now. The prospective growth of OLED technology on display industry will be optimistic. Over the last three decades, many different approaches on material and device designs have been implemented for improving the efficiency and stability of OLED devices. These efforts install main cornerstones to support the great achievement of OLED technology. However, until now, the performance and stability of blue OLEDs still have some concerns. This troublesome issue should be totally conquered before the large‐scale manufactures dominated over other display technologies, particularly liquid crystal‐based displays, takes place. Though significant progress has already been made to achieve high performance and long lifetime blue OLEDs, this topic still remains as one of the hot researches in OLEDs. We have been working on this area for about two decades and made some notable contributions. Consequently, in this personal account we have outlined our efforts to obtain better performing blue OLEDs by utilizing a range of emitters based on fluorescence, phosphorescence, delayed fluorescence and exciplex systems. We have also developed some novel host materials for blue OLEDs, which are worth mentioning in this account.     

Biosynthesis of Streptolidine Involved Two Unexpected Intermediates Produced by a Dihydroxylase and a Cyclase through Unusual Mechanisms

Streptothricin‐F (STT‐F), one of the early‐discovered antibiotics, consists of three components, a β‐lysine homopolymer, an aminosugar D ‐gulosamine, and an unusual bicyclic streptolidine. The biosynthesis of streptolidine is a long‐lasting but unresolved puzzle. Herein, a combination of genetic/biochemical/structural approaches was used to unravel this problem. The STT gene cluster was first sequenced from a Streptomyces variant BCRC 12163, wherein two gene products OrfP and OrfR were characterized in vitro to be a dihydroxylase and a cyclase, respectively. Thirteen high‐resolution crystal structures for both enzymes in different reaction intermediate states were snapshotted to help elucidate their catalytic mechanisms. OrfP catalyzes an Fe^II‐dependent double hydroxylation reaction converting L ‐Arg into (3R,4R)‐(OH)₂‐L ‐Arg via (3S)‐OH‐L ‐Arg, while OrfR catalyzes an unusual PLP‐dependent elimination/addition reaction cyclizing (3R,4R)‐(OH)₂‐L ‐Arg to the six‐membered (4R)‐OH‐capreomycidine. The biosynthetic mystery finally comes to light as the latter product was incorporation into STT‐F by a feeding experiment.