Kinetic study of the crosslinking reaction of 1,2‐polybutadiene with dicumyl peroxide in the absence and presence of vinyl acetate

The crosslinking reaction of 1,2-polybutadiene (1,2-PB) with dicumyl peroxide (DCPO) in dioxane was kinetically studied by means of Fourier transform near-infrared spectroscopy (FTNIR). The crosslinking reaction was followed in situ by the monitoring of the disappearance of the pendant vinyl group of 1,2-PB with FTNIR. The initial disappearance rate (R₀) of the vinyl group was expressed by R₀ = k[DCPO]^0.8[vinyl group]^−0.2 (120 °C). The overall activation energy of the reaction was estimated to be 38.3 kcal/mol. The unusual rate equation was explained in terms of the polymerization of the pendant vinyl group as an allyl monomer involving degradative chain transfer to the monomer. The reaction mixture involved electron spin resonance (ESR)-observable polymer radicals, of which the concentration rapidly increased with time owing to a progress of crosslinking after an induction period of 200 min. The crosslinking reaction of 1,2-PB with DCPO was also examined in the presence of vinyl acetate (VAc), which was regarded as a copolymerization of the vinyl group with VAc. The vinyl group of 1,2-PB was found to show a reactivity much higher than 1-octene and 3-methyl-1-hexene as model compounds in the copolymerization with VAc. This unexpectedly high reactivity of the vinyl group suggested that an intramolecular polymerization process proceeds between the pendant vinyl groups located on the same polymer chain, possibly leading to the formation of block-like polymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4437–4447, 2004     

Production of high melt strength polypropylene by gamma irradiation

High melt strength polypropylene (HMS-PP) has been recently developed and introduced in the market by the major international producers of polypropylene. Therefore, BRASKEM, the leading Brazilian PP producer, together with EMBRARAD, the leading Brazilian gamma irradiator, and the IPEN (Institute of Nuclear Energy and Research) worked to develop a national technology for the production of HMS-PP. One of the effective approaches to improve melt strength and extensibility is to add chain branches onto polypropylene backbone using gamma radiation. Branching and grafting result from the radical combinations during irradiation process. Crosslinking and main chain scission in the polymer structure are also obtained during this process. In this work, gamma irradiation technique was used to induce chemical changes in commercial polypropylene with two different monomers, Tri-allyl-isocyanurate (TAIC) and Tri-methylolpropane-trimethacrylate (TMPTMA), with concentration ranging from 1.5 to 5.0 mmol/100 g of polypropylene. These samples were irradiated with a ⁶⁰Co source at dose of 20 kGy. It used two different methods of HMS-PP processing. The crosslinking of modified polymers was studied by measuring gel content melt flow rate and rheological properties like melt strength and drawability. It was observed that the reaction method and the monomer type have influenced the properties. However, the concentration variation of monomer has no effect.     

Asymmetric synthesis of permethric acid. stereochemistry of chiral copper carbenoid reaction

The most effective optical isomer (1$\text{R}$-$\text{cis}$) of permethric acid ($\text{2}$, R = H), a potent intermediate in the production of synthetic pyrethroid, was enantioselectively prepared.     

Solvent effect on the radical polymerization of di-n-butyl itaconate

Solvent effect on the polymerization of di-n-butyl itaconate (DBI) with dimethyl azobisisobutyrate (MAIB) was investigated at 50 and 61°C. The solvents used were found to affect significantly the polymerization. The polymerization rate (R_p) and the molecular weight of the resulting polymer are lower in more polar solvents. The initiation rate (R_i) by MAIB, however, shows a trend of being rather higher in polar solvents. The stationary state concentration of propagating poly(DBI) radical was determined by ESR in seven solvents. The rate constants of propagation (k_p) and termination (k_t) were evaluated by using R_p, R_i, and the polymer radical concentration observed. The k_p value decreases fairly with increasing polarity of the solvent used, whereas k_t is not so influenced by the solvents. The solvent effect on k_p is explained in terms of a difference in the environment around the terminal radical center of the growing chain. Copolymerization of DBI with styrene (St) was also examined in three solvents with different physical properties. The poly(DBI) radical shows a lower reactivity toward St in a more polar solvent.     

Cope elimination and complexation of poly(dimethylaminoethyl methacrylate N-oxide)

Poly(dimethylaminoethyl methacrylate N-oxide) (poly(DMAEMNO)) was prepared by oxidation of poly(dimethylaminoethyl methacrylate) with hydrogen peroxide in methanol. From thermogravimetric and IR spectroscopic investigations Cope elimination of amine oxide group in poly(DMAENO) was found to occur at 120–150°C. The postpolymerization of partially pyrolyzed polymer carrying vinyl ester group as pendant was performed with azobisisobutyronitrile at 60°C in methanol to give cross-linked polymer that was found to form hydrogel. Poly(DMAEMNO) gave metal–polymer complexes with CuCl₂, ZnCl₂, and CoCl₂. Cobalt–polymer complex had a constitution of 1:2 of metal ion to amine oxide group, while copper– and zinc–polymer complexes seemed to have structures of 1:1 and 1:2 of metal ion to amine oxide group. Furthermore, polymer complexes of poly(DMAEMNO) with poly(methacrylic acid) and poly(acrylic acid) were found to be formed by mixing aqueous solutions of both polymers and also by radical polymerization of the acid monomers in the presence of poly(DMAEMNO). From elemental analysis, thermogravimetric investigation, and measurement of turbidity it was concluded that the resulting polymer–polymer complexes contained more than one acid monomer unit per one N-oxide unit.     

Kinetic and ESR studies on the radical polymerization of Di-n-butyl itaconate in benzene

The polymerization of di-n-butyl itaconate (DBI) intiated with AIBN was kinetically investigated in benezene. The polymerization rate (R_p) was expressed by: R_p = k[AIBN]^0.5[DBI]^1.7. The polymerization showed a considerably low overall activation energy of 15.3 kcal/mol. The initiator efficiency of AIBN in this system decreased with increasing DBI concentration, ranging from 0.34 to 0.55°C, which is ascribable to viscosity effect due to the monomer. From an ESR study, the polymerization system was found to involve two kinds of persistent radicals, namely, primary propagating ( III ) and propagating ( I ) radicals. The relative concentration of III to I increased with decreasing monomer concentration. Azo-nitrile initiators such as AVN and ACN similarly produced two persistent radicals, while MAIB, DBPO, and PBO yielded only propagating radical I as persistent. The MAIB-initiated polymerization of DBI was also performed in benzene. Similar kinetic features were observed, that is, a higher dependence of R_p on the DBI concentration and a low overall activation energy (14.4 kcal/mol). The following rate equation was obtained at 50°C:R_p = k[MAIB]^0.5[DBI]^1.6. The initiator efficiency of MAIB decreased with increasing DBI concentration, ranging from 0.32 to 0.53 at 50°C. The concentration of propagating radical I was determined by ESR at 50 and 61°C, from which k_p and k_t were estimated. The k_p value increased with increasing monomer concentration, while the k_t one decreased with the DBI concentration. These values are much lower compared with those of MMA.     

Synthesis and Polymerization of (S)-4-Methyl-2-N,N-dimethylaminopentyl Methacrylate

(S)-4-Methyl-2-N,N-dimethylaminopentyl methacrylate (DMAPM) was synthesized from the reaction of N,N-dimethyl-L-leucinol with methacryl chloride, and its radical polymerization was investigated. It was found that DMAPM readily polymerized by α,α¹-azobisisobutyronitrile (AIBN) as an initiator to give poly-DMAPM. The copolymerization of DMAPM(M₁) with styrene(Mz) was also studied in various solvents with AIBN as an initiator at 60°C. From the result obtained in benzene, Q and e values of DMAPM were determined to be 0.64 and -0.04, respectively. Specific rotations of the copolymers of DMAPM with styrene were not proportional to the weight percent of the DMAPM unit incorporated, but the observed relation gave a downward curve. The copolymerizations DMAPM with α, β-disubstituted monomers such as maleic acid, maleimide, and N-phenylmaleimide were carried out in order to induce asymmetric center in the polymer chain. After hydrolysis of the copolymers obtained, the hydrolyzed polymers were found to be optically active, suggesting an induction of asymmetric center into the polymer chain.