THE FIRST EXPERIMENT OF A THz GYROTRON WITH A PULSE MAGNET

A THz gyrotron with a pulse magnet has been designed, constructed and operated in FIR FU. It is developed as one of high frequency gyrotrons included in Gyrotron FU Series. The gyrotron has already achieved the first experimental result for high frequency operations whose radiation frequency exceeds 1 THz. In this paper, the design detail and the operation test results for sub-terahertz to terahertz range are described. The second harmonic operation is confirmed experimentally at the expected frequency of 1.005 THz due to TE_6,11 cavity mode at the magnetic field intensity of 19.0 T.     

Control of viscoelasticity using redox reaction

The viscoelasticity of a fluid was tuned with the Faradaic reaction of (11-ferrocenylundecyl)trimethylammonium bromide (FTMA), a "redox-switchable" surfactant. An aqueous solution of the reduced form of FTMA exhibited a remarkable viscoelasticity in the presence of sodium salicylate (NaSal) because of the formation of three-dimensional entanglement of wormlike micelles. Electrolytic oxidation of FTMA caused the viscosity of the system to dramatically decrease and the elasticity to disappear. This drastic decrease in viscoelasticity arose from the disruption of wormlike micelles. This novel electrorheological phenomenon is expected to be applicable to ink for inkjet printers, the electrochemically controlled release of substances entrapped in wormlike micelles of FTMA, and fluid flow rate control using electric signals.     

Isolation, characterization, and theoretical study of La2@C78

A new metallofullerene, La2@C78, has been synthesized by DC arc discharge method, isolated by high-performance liquid chromatography, and characterized by laser desorption time-of-flight mass spectrometry, UV-vis-NIR absorption, differential pulse voltammetry, 13C NMR spectroscopy, and theoretical calculations. The La2@C78/CS2 solution is dark violet and presents several characteristic absorption features at 647, 561, 533, and 386 nm, with an onset around 1000 nm. With respect to empty D3-C78, the capability of La2@C78 as an electron acceptor or donor is stronger. Addition of 1,1,2,2-tetrakis(2,4,6-trimethylphenyl)-1,2-disirane to La2@C78 photochemically, as well as thermally, affords bis- and mono-adducts. Theoretical studies and 13C NMR spectroscopic analysis of La2@C78 indicate that it possesses a D3h-C78 cage (78:5).     

Large-scale separation of metallic and semiconducting single-walled carbon nanotubes

In the applications of single-walled carbon nanotubes (SWNTs), it is extremely important to separate semiconducting and metallic SWNTs. Although several methods have been reported for the separation, only low yields have been achieved at great expense. We show a separation method involving a dispersion-centrifugation process in a tetrahydrofuran solution of amine, which makes metallic SWNTs highly concentrated to 87% in a simple way.     

Stability of a novel hexapeptide, (Me)Arg-Lys-Pro-Trp-tert-Leu-Leu-OEt, with neurotensin activity, in aqueous solution and in the solid state

The stability and some physicochemical properties of a novel hexapeptide, (Me)Arg-Lys-Pro-Trp-tert-Leu-Leu-OEt (I), with neurotensin activity, were investigated. The degradation of I in aqueous solution was observed as a pseudo-first order reaction. By determining the degradation rate of I at various pH values, it was found that I was most stable at around pH 4. The activation energies of the degradation in aqueous solutions at pH 2.2, 6.1, 7.0 and 8.0 were 16.3, 22.2, 23.9 and 24.2 kcal/mol, respectively. The enzymatic hydrolysis of I was studied in vitro with a porcine liver esterase at 37 degrees C. The degradation of I in this system was observed as a pseudo-first order reaction. The degradation rate of I in the presence of the esterase was about 10000 times larger than the rate in a buffer solution. I in the solid state was stable under 65 degrees C and labilized by strong light and/or high humidity. The pKa1, pKa2 and pKa3 of I were 7.1, 10.0 and 11.3, respectively. The partition coefficients between n-octanol and the buffer solution at pH values ranging from 2 to 11 were measured. The partition coefficient increased with the increase of the pH value. But the value at pH 7.0 was 2.10 x 10(-2), which was very low. The solubility of I in aqueous solution was more than 10 mg/ml. From the results of the powder X-ray diffraction pattern, I in the solid state was found to be amorphous. The dissolution rates in the 1st and 2nd fluid of JPXI at 37 degrees C and 100 rpm were 19.4 and 9.0 mg/cm2.min, respectively.     

Grinding-induced equimolar complex formation between thiourea and ethenzamide

We prepared and characterized a grinding-induced equimolar complex of thiourea with ethenzamide. When thiourea and ethenzamide were co-ground at a molar ratio of 3 : 1, new powder X-ray diffraction (PXRD) peaks were observed in addition to PXRD peaks of thiourea crystals. The optimum stoichiometry of the new structure was confirmed as 1 : 1 mol/mol. Effect of grinding time on the thiourea-ethenzamide equimolar complex formation was investigated by using PXRD, differential scanning calorimetry and Fourier transform infrared spectroscopy. The equimolar crystal structure was confirmed by X-ray diffraction measurements of the single crystal which was recrystallized from ethanol. It was found that the intermolecular hydrogen bond formations between thiourea and ethenzamide molecules contributed to the equimolar complex formation. The complex formation was not observed in the cases where benzamide, salicylamide or 3-ethoxybenzamide was co-ground with thiourea. 2-Alcoxyl benzamide structures should be required for the grinding-induced equimolar complex formation with thiourea.     

Site-specific cleavage of glycated human serum albumin in the presence of iron.

Nonenzymatically glycated human serum albumin was incubated with ferric ion at 37 degrees C in 0.2 M phosphate buffer, pH 7.4, up to 30 days. In the incubation mixture, amino acids, tyrosine and phenylalanine, were detected, suggesting site specific cleavage of glycated human serum albumin.     

Epitaxial Growth of Sr x Ba1 − x Nb2O6 Thin Films Prepared from Sol-Gel Process

In this study, we prepared Sr _x Ba_{1 – x} Nb₂O₆ (x = 0.3, 0.5 and 0.7) thin film on 0.75 wt% La doped SrTiO₃ (100) and (110) single crystal substrates. A homogeneous coating solution was prepared with Sr and Ba acetates and Nb(OEt)₅ as raw materials, and acetic acid and diethlene glycol monomethyl ether as solvents. The substrates were coated with the solution by spin coating method. As-coated thin films were heated from 973 to 1273 K in air. The grains of the thin film on La doped SrTiO₃ (100) were pillar shaped and arranged in right angle to each other. On the other hand, the grains of these thin films on La doped SrTiO₃ were pillar shape and arranged in one direction. The crystallographic relationship of the thin film between Sr _x Ba_{1 – x} Nb₂O₆ and substrate that the 130 and 310 direction of the thin film on the substrate were oriented with c-axis in parallel to the substrate surface. On the other hand, (hk0) phase diffractions of Sr _x Ba_{1 – x} Nb₂O₆ thin film on the substrate (110) were investigated in the XRD theta-2theta measurement. It is expected that the Sr _x Ba_{1 – x} Nb₂O₆ (x = 0.3, 0.5 and 0.7) were highly oriented or epitaxial growing on La doped SrTiO₃ (110) single crystal substrate.