P840-Reaction Centers from Chlorobium tepidum–Quinone Analysis and Functional Reconstitution into Lipid Vesicles

Membranes of Chlorobium tepidum contain about 35, 45 and2–10 molecules of menaquinone-7, chlorobium quinone (1′-oxo-menaquinone-7) and of the polar menaquinone (probably 1′-OH-menaquinone-7) per reaction center, respectively. None of these quinones was retained during the isolation of P840-reaction centers beyond the detection limit of about 0.2 quinones per reaction center, neither in the core complex nor in functionally intact reaction center preparations. The latter is shown to catalyze the formation of an electrochemical proton gradient in the presence of ascorbate and phenazinium methosulfate, when it is incorporated into lipid vesicles.     

Mechanistic Insights into a Sustainable Mechanochemical Synthesis of Ettringite

Mechanochemistry offers an environmentally benign and facile synthesis method for a variety of cement paste constituents. In addition, these methods can be used to selectively tune the properties of cement components. The mineral ettringite is an important component of cementitious materials and has additional technological potential due to its ion exchange properties. Synthesis of ettringite via mechanochemistry is an environmentally friendly alternative to conventional wet-chemical synthesis established in industry. This contribution explores the mechanism of a two-step mechanochemical synthesis of ettringite, which was previously found to greatly improve the reaction conversion as compared with one-pot synthesis. The crystallinity of Al(OH)₃ was found to decrease during the first stage of this mechanochemical synthesis. This was correlated to a significant decrease in the particle size of Al(OH)₃ in this stage. No other significant changes were found for the other components, suggesting that mechanochemical activation of Al(OH)₃ is responsible for the enhanced formation of ettringite by the two-step approach. The environmentally friendly approach developed for ettringite synthesis offers a versatile synthetic strategy, which can be applied to synthesise further cementitious materials.     

Fused-Pentagon Isomers of C60 Fullerene Isolated as Chloro and Trifluoromethyl Derivatives

The carbon cage of buckminsterfullerene I_h-C₆₀, which obeys the Isolated-Pentagon Rule (IPR), can be transformed to non-IPR cages in the course of high-temperature chlorination of C₆₀ or C₆₀Cl₃₀ with SbCl₅. The non-IPR chloro derivatives were isolated chromatographically (HPLC) and characterized crystallographically as ¹⁸⁰⁹C₆₀Cl₁₆, ¹⁸¹⁰C₆₀Cl₂₄, and ¹⁸⁰⁵C₆₀Cl₂₄, which contain, respectively two, four, and four pairs of fused pentagons in the carbon cage. High-temperature trifluoromethylation of the chlorination products with CF₃I afforded a non-IPR CF₃ derivative, ¹⁸⁰⁷C₆₀(CF₃)₁₂, which contains four pairs of fused pentagons in the carbon cage. Addition patterns of non-IPR chloro and CF₃ derivatives were compared and discussed in terms of the formation of stabilizing local substructures on fullerene cages. A detailed scheme of the experimentally confirmed non-IPR C₆₀ isomers obtained by Stone–Wales cage transformations is presented.     

Response behavior of sodium-selective electrodes modified by surface attachment of the anticoagulant polysaccharides heparin and chondroitin sulfate

Two different polysaccharides with anticoagulant activities, heparin and chondroitin sulfate, were used to modify the surface of sodium-selective electrodes based on asymmetric cellulose triacetate (CTA) membranes. The membranes were formulated with sodium ionophore X, anionic additive, and o-nitrophenyl octyl ether. The response behavior of the surface-modified sodium electrodes was compared with that of control CTA, as well as poly(vinyl chloride) (PVC)-based sodium-selective electrodes. It was found that the selectivity coefficients obtained with the surface modified CTA membrane electrodes were slightly higher than those of the control, but in the case of heparin-modified electrodes they still met the requirements for analysis of sodium in physiological fluids within an error of <1%; the corresponding error for chondroitin sulfate-modified electrodes was also <1% except for the case of potassium ion in which the error was 1.3%. Likewise, it was found that other response characteristics, such as detection limit, linear range, slope of the response plot, selectivity pattern, and response time were comparable in both the control and the polysaccharide-modified electrodes. Therefore, the surface modification does not significantly alter the response behavior of the sensors.     

Adsorption and viscoelastic properties of fractionated mucin (BSM) and bovine serum albumin (BSA) studied with quartz crystal microbalance (QCM-D)

The adsorption profile and viscoelastic properties of bovine submaxillary gland mucin (BSM) and bovine serum albumin (BSA), extracted from a commercial mucin preparation, adsorbing to polystyrene surfaces has been studied using quartz crystal microbalance with dissipation monitoring (QCM-D). A significant difference in the adsorption properties of the different proteins was detected; with the BSA adsorbing in a flat rigid layer whilst the mucin adsorbed in a diffuse, highly viscoelastic layer. Subsequent addition of BSA to the preadsorbed mucin layer resulted in stiffening of the protein layer which was attributed to complexation of the mucin by BSA. In contrast, a preadsorbed layer of BSA prevented mucin adsorption altogether. Combined mixtures of mucin and BSA in well defined ratios revealed intermediate properties between the two separate protein species which varied systematically with the protein ratios. The results shed light on the synergistic effects of complexation of lower molecular weight biomolecular species with mucin. The possibility to selectively control protein uptake and tailor the physical properties of the adsorbed layer makes mucin an attractive option for application in biomaterial coatings.     

Effect of capillary condensation on friction force and adhesion

Friction force measurements have been conducted with a colloid probe on mica and silica (both hydrophilic and hydrophobized) after long (24 h) exposure to high-humidity air. Adhesion and friction measurements have also been performed on cellulose substrates. The long exposure to high humidity led to a large hysteresis between loading and unloading in the friction measurements with separation occurring at large negative applied loads. The large hysteresis in the friction-load relationship is attributed to a contact area hysteresis of the capillary condensate which built up during loading and did not evaporate during the unloading regime. The magnitude of the friction force varied dramatically between substrates and was lowest on the mica substrate and highest on the hydrophilic silica substrate, with the hydrophobized silica and cellulose being intermediate. The adhesion due to capillary forces on cellulose was small compared to that on the other substrates, due to the greater roughness of these surfaces.     

Adhesion forces between protein layers studied by means of atomic force microscopy

Adhesion forces between different protein layers adsorbed on different substrates in aqueous media have been measured by means of an atomic force microscope using the colloid probe technique. The effects of the loading force, the salt concentration and pH of the medium, and the electrolyte type on the strength, the pull-off distance, and the separation energy of such adhesion forces have been analyzed in depth. Two very different proteins (bovine serum albumin and apoferritin) and two dissimilar substrates (silica and polystyrene) were used in the experiments. The results clearly point out a very important contribution of the electrostatic interactions in the adhesion between protein layers.     

Spurenbestimmung von Vergaser- und Dieselkraftstoffen im Wasser mittels Capillar-Gas-Chromatographie/automatischer Mustererkennung

Summary A method for trace analysis determination of carburetor and diesel fuels in water is described. The isolation and concentration of fuel traces is carried out by microextraction with n-hexane using a suitable micro-separator. After their separation by capillary gas chromatography fuels provide typically structured chromatographic patterns and, therefore, a chromatogram (sample pattern) of the extract is generated. The sample pattern is searched for fuel patterns by comparing the chromatogram with reference chromatograms of these fuels in a library. An automatic pattern recognition algorithm is applied, using elements of the fuzzy set theory. As preliminary interpretation the computer delivers a list of identification proposals which have to be assessed and submitted to a final interpretation by the analyst.     

Superlubricity using repulsive van der Waals forces

Using colloid probe atomic force microscopy, we show that if repulsive van der Waals forces exist between two surfaces prior to their contact then friction is essentially precluded and supersliding is achieved. The friction measurements presented here are of the same order as the lowest ever recorded friction coefficients in liquid, though they are achieved by a completely different approach. A gold sphere attached to an AFM cantilever is forced to interact with a smooth Teflon surface (templated on mica). In cyclohexane, a repulsive van der Waals force is observed that diverges at short separations. The friction coefficient associated with this system is on the order of 0.0003. When the refractive index of the liquid is changed, the force can be tuned from repulsive to attractive and adhesive. The friction coefficient increases as the Hamaker constant becomes more positive and the divergent repulsive force, which prevents solid-solid contact, gets switched off.     

A Mechanistic Perspective on Plastically Flexible Coordination Polymers

Mechanical flexibility in single crystals of covalently bound materials is a fascinating and poorly understood phenomenon. We present here the first example of a plastically flexible one‐dimensional (1D) coordination polymer. The compound [Zn(μ‐Cl)₂(3,5‐dichloropyridine)₂]_n is flexible over two crystallographic faces. Remarkably, the single crystal remains intact when bent to 180°. A combination of microscopy, diffraction, and spectroscopic studies have been used to probe the structural response of the crystal lattice to mechanical bending. Deformation of the covalent polymer chains does not appear to be responsible for the observed macroscopic bending. Instead, our results suggest that mechanical bending occurs by displacement of the coordination polymer chains. Based on experimental and theoretical evidence, we propose a new model for mechanical flexibility in 1D coordination polymers. Moreover, our calculations propose a cause of the different mechanical properties of this compound and a structurally similar elastic material.