Pd (II)‐catalyzed vinyl addition polymerization of novel functionalized norbornene bearing dimethyl carboxylate groups

Three novel functionalized polynorbornenes (PNB) with pendant dimethyl carboxylate group (carboxylates—acetate, propionate, and butyrate) are synthesized as a vinyl‐type with a palladium (II) catalyst in high yield. The effects of size of substitutents, molar ratio of monomer to catalyst, solvent polarity, reaction time, and temperature on the polymerization of exo‐norbornene dimethyl propionate were systematically investigated. The low molar ratio and temperature, as well as high polarity of solvent, and long reaction time, are favorable for the enhancement of the monomer conversion, especially, the solvent have an obvious effect on the catalyst activity. The resulting poly(cis‐norbornene‐exo‐2,3‐dimethyl carboxylates) (PNB‐dimethyl carboxylates) show good solubility in common organic solvent and high thermal stability up to 360 °C. The glass transition temperature was detected by DMA at 331, 324, and 318 °C for acetate, propionate, and butyrate, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3391–3399, 2007     

Intramyocellular lipid quantification: comparison between 3.0- and 1.5-T (1)H-MRS

OBJECTIVE: This study aimed to prospectively compare measurement precision of calf intramyocellular lipid (IMCL) quantification at 3.0 and 1.5 T using (1)H magnetic resonance spectroscopy ((1)H-MRS). MATERIALS AND METHODS: We examined the soleus and tibialis anterior (TA) muscles of 15 male adults [21-48 years of age, body mass index (BMI)=21.9-38.0 kg/m(2)]. Each subject underwent 3.0- and 1.5-T single-voxel, short-echo-time, point-resolved (1)H-MRS both at baseline and at 31-day follow-up. The IMCL methylene peak (1.3 ppm) was scaled to unsuppressed water peak (4.7 ppm) using the LCModel routine. Full width at half maximum (FWHM) and signal-to-noise ratios (SNRs) of unsuppressed water peak were measured using jMRUI software. Measurement precision was tested by comparing interexamination coefficients of variation (CV) between different field strengths using Wilcoxon matched pairs signed rank test in all subjects. Overweight subjects (BMI>25 kg/m(2)) were analyzed separately to examine the benefits of 3.0-T acquisitions in subjects with increased adiposity. RESULTS: No significant difference between 3.0 and 1.5 T was noted in CVs for IMCL of soleus (P=.5). CVs of TA were significantly higher at 3.0 T (P=.02). SNR was significantly increased at 3.0 T for soleus (64%, P<.001) and TA (62%, P<.001) but was lower than the expected improvement of 100%. FWHM at 3.0 T was significantly increased for soleus (19%, P<.001) and TA (7%, P<.01). Separate analysis of overweight subjects showed no significant difference between 3.0- and 1.5-T CVs for IMCL of soleus (P=.8) and TA (P=.4). CONCLUSION: Using current technology, (1)H-MRS for IMCL at 3.0 T did not improve measurement precision, as compared with 1.5 T.     

MODELING HARVEST SCHEDULING IN MULTIFUNCTIONAL PLANNING OF FORESTS FOR LONGTERM WATER YIELD OPTIMIZATION

In this study, wood production and hydrologic functions of forests were accommodated within a planning procedure for separate working circles (areas dedicated to certain forest functions) that were delineated according to an Ecosystem‐Based Functional Planning approach. Mixed integer goal programming was used as the optimization technique. The timing and scheduling of a maintenance cutting (partial harvest) was the decision variable in the modeling effort, and an original formulation was developed as a multiobjective planning procedure. Four sample planning strategies were developed and model outputs were evaluated according to these strategies. Spatial characteristics of stands were considered, and used to prohibit the regeneration of adjacent stands during the same time period. Because of the positive relationship between qualified water production and standing timber volume in the forest, the model attempts to maximize qualified water production levels by increasing standing volume stocks in the forest through the delay of regeneration activities.     

Synthesis of In<Subscript>2</Subscript>O<Subscript>3</Subscript>nanoparticles by thermal decomposition of a citrate gel precursor

This paper describes the synthesis of indium oxide by a modified sol–gel method, and the study of thermal decomposition of the metal complex in air. The characterization of the intermediate as well as the final compounds was carried out by thermogravimetry, differential thermal analysis, Fourier transform infrared spectroscopy, X-ray diffraction, transmission electron microscopy, and small angle X-ray scattering. The results show that the indium complex decomposes to In₂O₃ with the formation of an intermediate compound. Nanoparticles of cubic In₂O₃ with crystallite sizes in the nanosize range were formed after calcination at temperatures up to 900°C. Calcined materials are characterized by a polydisperse distribution of spherical particles with sharp and smooth surfaces.This revised version was published online in August 2005 with a corrected issue number.     

Continuous families of Hölder functions that are not of bounded variation

This paper deals with three classes of functions of great importance in analysis and its applications. We construct a family of Hölder functions in the closed unit interval having two continuous parameters. Those functions are not of bounded variation for any pair of values of the Hölder constant and exponent. The construction depends on a change of variables given by a Lipschitz function with constant equal to 1. Several questions related to the concepts of genericity, surjectivity and deformability are posed at the end.     

Acetobacter cellulose pellicle as a temporary skin substitute

Applied Biochemistry and Biotechnology - A bacterial strain with morphological and biochemical properties close toAcetobacter xylinum has been cultured in nonagitated, inverted sucrose- and yeast...     

Effect of synthesis conditions on the microstructure of TEOS derived silica hydrogels synthesized by the alcohol-free sol–gel route

Silica matrices synthesized from a pre-hydrolysis step in ethanol followed by alcohol removal at low pressure distillation, and condensation in water, are suitable for encapsulation of biomolecules and microorganisms and building bioactive materials with optimized optical properties. Here we analyze the microstructure of these hydrogels from the dependence of I(q) data acquired from SAXS experiments over a wide range of silica concentration and pH employed in the condensation step. From the resulting data it is shown that there is a clear correlation between the microscopic parameters—cluster fractal dimension (D), elementary particle radius (a) and cluster gyration radius (R)—with the attenuation of visible light when the condensation step proceeds at pH < 6. At higher pHs, there is a steep dependence of the cluster density (~R ^D−3) with the condensation pH, and non-monotonous changes of attenuance are less than 20%, revealing the complexity of the system. These results, which were obtained for a wide pH and silica concentration range, reinforce the idea that the behavior of gels determined in a restricted interval of synthesis variables cannot be extrapolated, and comparison of gelation times is not enough for predicting their properties.     

Effect of chemical modification on oligomerization capacity of alumina support for Pd-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst

Effect of modification with an alkali metal on the acid properties of alumina supports and on the oligomerization capacity and working stability of Pd-Al₂O₃ catalysts was studied.     

L-tryptophan transport through a hydrophobic liquid membrane using AOT micelles: dynamics of the process as revealed by small angle X-ray scattering

Hydrophobic liquid membranes have a high technological potential in many fields of separation science. The dynamics of these systems is very complex and still not fully understood. In this work we studied the effect of the incorporation of cationic and anionic L-tryptophan at pH 1.8 and 10.0, respectively, in Aerosol-OT reverse micelles performing small angle X-ray scattering experiments. The use of a synchrotron radiation source allowed efficient in situ data acquisition. Several insights on L-tryptophan transport dynamics through hydrophobic membranes containing AOT could be obtained from these SAXS experiments, such as amino acid site localization and changes in the reverse micelle sizes.     

Cure temperature influence on natural rubber—A small angle X‐ray scattering study

To analyze the natural rubber behavior during vulcanization under different cure treatments, an experimental investigation using small angle X‐ray scattering was performed. To achieve this, a set of samples were prepared using sulfur and N‐t‐butyl‐2‐benzothiazole sulfenamide as accelerator and then cured at temperatures between 403 and 463 K reaching their optimum mechanical properties considering rheometer tests. The crosslink density of the samples was evaluated by means of the swelling technique in solvent. In the usual Lorentz corrected representation of the X‐ray scattered intensity, a maximum was observed in the plots corresponding to the cured samples, revealing a highly correlated structure. This maximum shifted toward higher values of the scattering vector when the cure temperature of the samples increased. This behavior is discussed in terms of the crosslinks type present in the vulcanized rubber network at different cure temperatures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2966–2971, 2007