Particle size control of alumina nanopowders in microwave plasma-chemical process

The effect of operating parameters of the oxidation of aluminum powder in a stream of air microwave plasma on the particle size of the obtained Al₂O₃ has been studied. The possibility of improving the particle size of the powder by pretreatment the starting aluminum with chemicals activating particle combustion in a reactor has been investigated. Ways of controlling the particle size of produced aluminum oxide nanopowders in the range of 20–80 nm have been found.     

Microwave-assisted chloride process for the production of titanium dioxide

The conditions for the formation of the particle-size and phase composition of titanium dioxide upon the oxidation of titanium tetrachloride in a stream of oxygen-containing microwave discharge plasma have been studied. The possibility of controlling the particle size of the resulting powder in the range of 50–100 nm by changing various operating parameters has been shown. The conditions for obtaining a nearly single-phase powder of the anatase or rutile modification have been found.     

Microwave plasmochemical synthesis of nanopowders in the system Pb-Zr-Ti-O

Conditions for building up the composition and structure of mixed Pb, Zr, and Ti oxides in a microwave plasma-chemical process were studied. As starting substances Pb(C₂H₅)₄, Ti(C₄H₉O)₄, and a 80% Zr(C₄H₉O)₄ solution in 2-propanol were used. To avoid stratification of the components the initial temperature of the flow should not exceed 1000°C. Under these conditions the crystallization of a complex structure requires a combination of a plasma-chemical synthesis with subsequent thermal treatment of the resulting powders. After the thermal treatment an average particle size of lead zirconate-titanate nanopowder was 120 nm.     

Nanoporous polymer networks based on <Emphasis Type="Italic">N</Emphasis>-vinylpyrrolidone

A method of preparing nanoporous polymer networks containing N-vinylpyrrolidone units via the crosslinking radical copolymerization in bulk performed in the presence of amphiphilic N-vinylpyrrolidone copolymers with the branched morphology and different physicochemical characteristics is developed. It is shown that macromolecular nanoobjects may be extracted from polymer composites using good solvents, such as chloroform and isopropyl alcohol. The physicomechanical, thermal, and diffusion–sorption properties of polymer composites before and after their extraction are compared. SEM and low-temperature nitrogen adsorption measurements reveal that nanosized pores are contained in the network copolymers after extraction of the polymer additives. The specific surface area, total pore volume, pore size, and pore-size distribution are determined. The maximum specific surface area of polymer networks attains ~26 m²/g, and mesopores compose the main type of pores.     

Nanosized zirconium diboride: Synthesis and properties

The thermolysis of Zr(BH₄)₄ vapor at 573 and 623 K in a vacuum of 1.33 × 10⁻¹ Pa was studied. Nanosized zirconium diboride was produced as an X-ray amorphous powder and a crystalline film. According to electron microscopy data, the X-ray amorphous zirconium diboride powder obtained at 573 or 623 K consists of spherical particles 30–40 nm in diameter, which is in quite a good agreement with the equivalent particle diameter (∼35 nm) calculated from the specific surface area of ZrB₂. After annealing at 1273 K, the X-ray amorphous zirconium diboride powder crystallizes into a hexagonal lattice with the unit cell parameters a = 0.3159 nm and c = 0.3527 nm. The coherent scattering length D _hkl is ∼27 nm. The zirconium diboride film produced at 573 or 623 K crystallizes into a hexagonal lattice with the unit cell parameters a = 0.3163−0.3168 nm and c = 0.3524−0.3531 nm. The coherent scattering length D _hkl is ∼14 nm. The thickness of the ZrB₂ film on quartz, glass ceramics, and stainless steel is 5–7 μm. The microhardness of the film on a stainless steel substrate under a load of 20 g is 17.8 GPa.     

New polymer materials with controlled nanoporous structure based on N-vinylpyrrolidone

The polymer networks with nanoporous structure were obtained by the crosslinking free-radical copolymerization of N-vinylpyrrolidone with triethylene glycol dimethacrylate in bulk in the presence of amphiphilic copolymer and its fractions as templates. The templating agents consisted of copolymer or their fragments with similar monomer units and different molecular weight. Macromolecular templates were shown to be removed from the polymer composite by PrⁱOH leaving the pores. The values of the specific surface areas, the total pore volumes, pore size, and pore size distribution were measured by the method of low-temperature nitrogen absorption. The maximum value of the specific surface area was calculated to be ~26 m² g^–1. The value was significantly higher than that for the usual copolymer network. The relationship between specific surface area, parameters of pores, and macromolecular structure of template has been established. It is shown by Brunauer—Emmett—Teller method that the macromolecules having a branched architecture are more effective for the preparation of the polymer network with more developed specific surface area and narrow pore size distribution.

     

Mechanical properties of epoxy composites based on silver nanoparticles formed in situ

The mechanical and thermomechanical properties of metal-containing epoxy composite films based on silver nanoparticles synthesized in situ are investigated. There is a nonmonotonic dependence of the mechanical properties on the concentration of silver myristate used as a precursor. It is found for the first time that the breaking strength and elastic modulus increase by a factor of 1.8–1.5 relative to those of the unmodified matrix at a small concentration of precursor nanoparticles (on the order of 0.1 wt %). DSC and thermomechanical studies reveal that the glass-transition temperature decreases slightly (by 5–6°C) as the precursor concentration is increased to 0.5 wt %, thereby suggesting a weak plasticization of the modified epoxy matrix. On the basis of the spectrophotometry data measured in the region of surface plasmon resonance of silver nanoparticles (420–425 nm) and SEM data, it is inferred that the in situ strengthening of an epoxy nanocomposite based on epoxy resin ED-20, triethylamine, and silver myristate is attained because silver nanoparticles smaller than 20 nm in size and having a narrow particle-size distribution are formed during curing.     

On the factors determining the pyrophoric stability of tungsten nanopowder obtained by plasma-chemical pyrolysis of W(CO)6

Nonpyrophoric tungsten powders with an average particle size of about 30 nm were obtained by pyrolysis of tungsten hexacarbonyl in a flow of microwave discharge nitrogen plasma. It is found that these powders are stable in air up to 300°C. The reason for such stability is that the structure of powder particles is of the core-double shell type, in which the metal core is covered with an oxide film approximately 1 nm in thickness, coated in turn with roentgenoamorphous layer consisting of carbon, oxygen, and nitrogen atoms. It is also established that the powders under investigation mainly release carbon oxides (CO and CO₂) and water into the gas phase upon heating in vacuum. Among the molecules present in the gas phase in small concentrations, nitrogen monoxide (NO) and formaldehyde (H₂CO) are worth mentioning apart from C1–C3 hydrocarbons.