Applying a Mode Selector to Improve the Pulse-Compression Performance of Asymmetric-Coupled-Waveguide-Based Dispersion Compensators

An InGaAsP slab-type asymmetric-coupled-waveguide-based dispersion compensator with a mode selector has been designed and fabricated. The mode selector is necessary to select either a symmetric [with a positive group-velocity dispersion (GVD)] or antisymmetric (with a negative GVD) supermode. These supermodes exist simultaneously in the dispersion-compensation region of the device. Pulse-compression experiments were used to test the dispersion compensator, evaluating the function of the mode selector. A theoretical study of the experimental results shows that the mode selector obtains a very strong selectivity (nearly 100%) for the antisymmetric supermode.     

Spin content of the nucleon in a non-topological chiral soliton model

The spin content of the proton is investigated by studying the flavor singlet axial structure of the nucleon in a non-topological chiral soliton model. In order to construct a nucleon state we used the generator coordinate projection method as well as a coherent state for the meson wave function. Using a standard set of parameters we found the value g _A ⁰ ? 0.44 for the flavor singlet axial vector coupling constant. This result is not far from that of a typical valence quark model.     

Synthesis and evaluation of 1-arylsulfonyl-3-piperazinone derivatives as factor Xa inhibitor

Intravascular clot formation is an important factor in a number of cardiovascular diseases. Therefore, the prevention of blood coagulation has become a major target for new therapeutic agents. One attractive approach is the inhibition of factor Xa (FXa), which is a key enzyme in coagulation cascade responsible for the generation of thrombin by limited proteolysis of its zymogen, prothrombin. We have investigated 1-arylsulfonyl-3-piperazinone derivatives, containing a 4-(piperidino)pyridine group in place of guanidino and/or amidino groups, and discovered compound M55113 (30a: 4-[(6-Chloro-2-naphthalenyl)sulfonyl]-1-[[1-(4-pyridinyl)-4-piperidinyl]methyl]piperazinone), as a potent inhibitor of FXa (IC50=0.06 microM) with high selectivity for FXa over trypsin and thrombin.     

Synthesis and properties of new crystalline poly(arylene ether nitriles)

Crystalline poly(arylene ether nitrile) could be prepared by the polycondensation of 2,6-dihalobenzonitrile with resorcinol at 200°C in N-methylpyrrolidone in the presence of sodium carbonate. A reaction temperature of at least 200°C was necessary to attain high molecular weight polymer. Spectral data indicated that the polymer had the structure of a poly(meta-phenylene ether) with pendent nitrile groups on every other phenylene unit. Despite this structure, the crystallinity and the crystallization rate of the polymer were greater than those of the corresponding polymer with a para-linked structure. The glass transition temperature and the melting temperature of the polymer were almost the same as those of poly(etheretherketone) (PEEK^TM). A series of other new poly(arylene ether nitriles) were also examined. The polymers derived from 4,4′-biphenol, dihydroxytetra-phenylmethane, dihydroxydiphenylsulfone, and 1,5-isoquinolinediol had high glass transition temperatures. The poly(arylene ether nitriles) exhibited excellent tensile strength compared with the corresponding ketone- or sulfone-containing polymers. Comparing the three different kinds of polymers containing the same bisphenol units, the order of glass transition temperature was found to be sulfone- > nitrile- > ketone-containing polymers, while the order of tensile strength was nitrile- > ketone- > sulfone-containing polymers. The excellent mechanical properties are attributable to dipole-dipole interactions of nitrile groups. © 1993 John Wiley & Sons, Inc.     

Reaction of azole condensed quinoxaline N-oxides with acetic anhydride

The reaction of 7-chlorotetrazolo[1,5-α]quinoxaline 5-oxide 6a with acetic anhydride gave 7-chloro-5-(7-chlorotetrazolo[1,5-α]quinoxalin-4-yl)-4,5-dihydro-4-oxotetrazolo[1,5-α]quinoxaline 7a , while the reaction of 7-chloro-1,2,4-triazolo[4,3-α]quinoxaline 5-oxide 6b with acetic anhydride afforded 7-chloro-5-(7-chloro-1,2,4-triazolo[4,3-α]quinoxalin-4-yl)-4,5-dihydro-4-oxo-1,2,4-triazolo[4,3-α]quinoxaline 7b and 7-chloro-4,5-dihydro-4-oxo-1,2,4-triazolo[4,3-α]quinoxaline 8b . The reaction of compound 6a or 6b with acetic anhydride/acetic acid provided 7-chloro-4,5-dihydro-4-oxo-tetrazolo[1,5-α]quinoxaline 8a or compound 8b , respectively.     

Effect of compression on interaction between 1,4-dihydropyridine compounds and lactose monohydrate

Manidipine dihydrochloride or benidipine hydrochloride will change to hydrate form in part, when differential scanning calorimetric (DSC) measurement is carried out together with lactose monohydrate. This interaction was accelerated by compressing their mixture. It can be suggested that the interaction may cause by the disruption of crystal structure of lactose monohydrate due to compression to set free of water molecules. A new DSC peak at 170 degrees C, which was not observed in each component, appeared in DSC measurement of a mixture. This will be based on hydrate formed by the interaction, i.e., movement of water molecules. The profile of the plotting of the DSC peak area ratio before and after compression against the compression force changed by the molar ratio of lactose monohydrate in a mixture. In the case of low molar ratio of lactose monohydrate, profiles for manidipine dihydrochloride and benidipine hydrochloride differed from each other. This will be because manidipine dihydrochloride is stickier than benidipine hydrochloride. The profile for manidipine dihydrochloride became more gradual and showed lag compression force region when the amount of addition of the lubricant, magnesium stearate in a mixture increased. The endothermic peak area at 170 degrees C for manidipine dihydrochloride was larger than that for benidipine hydrochloride. It should be suggested that benidipine hydrochloride is easier to be transformed to its hydrate than manidipine dihydrochloride.     

Substituent effects on the tautomer ratios between the hydrazone imine and diazenyl enamine forms in side-chained quinoxalines

The 3-(arylhydrazono)methyl-2-oxo-1,2-dihydroquinoxalines 9–11 were synthesized by the reaction of the quinoxalines 6–8 with various p-substituted benzenediazonium salts. Compounds 9–11 showed the tautomeric equilibria between the hydrazone imine A and diazenyl enamine B forms in dimethyl sulfoxide media. The substituent effect on the tautomer ratios of A to B was studied by the nmr spectroscopy to clarify that the presence of the ester group R² on the hydrazone carbon and electron-donating p-substituent R¹ on the side chain benzene ring exhibited a tendency to increase the ratios of the tautomer A .     

Scandium ion-promoted photoinduced electron transfer from electron donors to acridine and pyrene. Essential role of scandium ion in photocatalytic oxygenation of hexamethylbenzene

Photoinduced electron transfer from a variety of electron donors including alkylbenzenes to the singlet excited state of acridine and pyrene is accelerated significantly by the presence of scandium triflate [Sc(OTf)(3)] in acetonitrile, whereas no photoinduced electron transfer from alkylbenzenes to the singlet excited state of acridine or pyrene takes place in the absence of Sc(OTf)(3). The rate constants of the Sc(OTf)(3)-promoted photoinduced electron-transfer reactions (k(et)) of acridine to afford the complex between acridine radical anion and Sc(OTf)(3) remain constant under the conditions such that all the acridine molecules form the complex with Sc(OTf)(3). In contrast to the case of acridine, the k(et) value of the Sc(OTf)(3)-promoted photoinduced electron transfer of pyrene increases with an increase in concentration of Sc(OTf)(3) to exhibit first-order dependence on [Sc(OTf)(3)] at low concentrations, changing to second-order dependence at high concentrations. The first-order and second-order dependence of k(et) on [Sc(OTf)(3)] is ascribed to the 1:1 and 1:2 complexes formation between pyrene radical anion and Sc(OTf)(3). The positive shifts of the one-electron redox potentials for the couple between the singlet excited state and the ground-state radical anion of acridine and pyrene in the presence of Sc(OTf)(3) as compared to those in the absence of Sc(OTf)(3) have been determined by adapting the free energy relationship for the photoinduced electron-transfer reactions. The Sc(OTf)(3)-promoted photoinduced electron transfer from hexamethylbenzene to the singlet excited state of acridine or pyrene leads to efficient oxygenation of hexamethylbenzene to produce pentamethylbenzyl alcohol which is further oxygenated under prolonged photoirradiation of an O(2)-saturated acetonitrile solution of hexamethylbenzene in the presence of acridine or pyrene which acts as a photocatalyst together with Sc(OTf)(3). The photocatalytic oxygenation mechanism has been proposed based on the studies on the quantum yields, the fluorescence quenching, and direct detection of the reaction intermediates by ESR and laser flash photolysis.