InAs/GaAs (1 1 1)A heteroepitaxial systems

We studied the structural, electrical, and mechanical properties of an InAs thin film grown on GaAs (1 1 1)A substrates by molecular beam epitaxy. In contrast to conventionally used (0 0 1) surfaces, where Stranski–Krastanov growth dominates the highly mismatched heteroepitaxy, layer-by-layer growth of InAs can be established. One of the largest advantages of this unique heteroepitaxial system is that it provides a two-dimensional electron gas system in the near-surface region without the problem of electron depletion. We review the fundamental properties and applications of this unique heteroepitaxial system.     

Quantum Hall effect in back-gated InAs/GaSb heterostructures under a tilted magnetic field

We investigate the quantum Hall effect (QHE) in the InAs/GaSb hybridized electron–hole system grown on a conductive InAs substrate which act as a back-gate. In these samples, the electron density is constant and the hole density is controlled by the gate-voltage. Under a magnetic field perpendicular to the sample plane, the QHE appears along integer Landau-level (LL) filling factors of the net-carriers, where the net-carrier density is the difference between the electron and hole densities. In addition, longitudinal resistance maxima corresponding to the crossing of the extended states of the original electron and hole LLs make the QHE regions along integer-ν_net discontinuous. Under tilted magnetic fields, these R_xx maxima disappear in the high magnetic field region. The results show that the in-plane magnetic field component enhances the electron–hole hybridization and the formation of minigaps at LL crossings.     

A regio- and stereoselective alpha-methylation of gamma,delta-epoxy-alpha,beta-unsaturated esters with a Me2Zn-CuCN reagent

A highly regio- and stereoselective alpha-methylation reaction of gamma,delta-epoxy-alpha,beta-unsaturated esters was achieved by using a Me2Zn-CuCN reagent.     

Analysis of conjugated linoleic acids as 9-anthrylmethyl esters by reversed-phase high-performance liquid chromatography with fluorescence detection

A simple and highly sensitive method for determining the fatty acid composition of food lipids containing conjugated linoleic acid (CLA) is described. The method is based on the separation of the 9-anthrylmethyl ester derivatives of saturated and unsaturated (conjugated and non-conjugated) fatty acids by reversed-phase high-performance liquid chromatography with fluorescence detection. Just like the other fatty acids, CLA reacts readily with 9-anthryldiazomethane at room temperature to produce 9-anthrylmethyl esters without isomerization and decomposition of the conjugated double bonds. Clear resolution of the individual fatty acids as their 9-anthrylmethyl esters is achieved on a highly efficient octadecylsilylated silica column (150- x 3-mm i.d., 3-microm particle size) using a stepwise gradient elution with methanol-water. The method is standardized with commercially available CLA isomers (cis-9, trans-11 and trans-10, cis-12-octadecadienoic acids, and their cis,cis and trans,trans isomers) and applied for determination of the fatty acid compositions of milk and sdairy products.     

Fabrication of polymer Langmuir-Blodgett films containing regioregular poly(3-hexylthiophene) for application to field-effect transistor

Semiconducting thin films consisting of regioregular poly(3-hexylthiophene) (RR-PHT) and poly(N-dodecylacrylamide) (pDDA) were constructed by the Langmuir-Blodgett (LB) technique. A mixture of RR-PHT and pDDA spread from a chloroform solution on a water surface forms a stable monolayer, which can be transferred onto solid substrates by the LB method, yielding a well-defined polymer LB film. Surface morphology studies of the LB film indicate that the RR-PHT is dispersed uniformly throughout the surface. The polymer thin film was chemically doped by contacting with FeCl3 acetonitrile solution, and a conductivity of 5.6 S/cm was achieved. Further, the LB film was utilized as the semiconducting film in the field-effect transistor (FET), and mobilities of 2.2 x 10(-4) and 4.4 x 10(-4) cm2 V(-1) s(-1) were obtained by analyzing the saturated and linear regions of the current-voltage characteristic, respectively.     

Self-crosslinkable polymers. I. Copolymerization of glycidyl methacrylate with 2-vinylpyridine and 2-vinyl-5-ethylpyridine

A soluble and self-crosslinkable linear copolymer with pendant epoxy and pyridyl groups was obtained from glycidyl methacrylate (M₁) and 2-vinylpyridine (M₂) or 2-vinyl-5-ethylpyridine (M₂) by the action of azobisisobutyronitrile. The monomer reactivity ratios were determined in tetrahydrofuran at 60°C: r₁ = 0.510, r₂ = 0.620 with 2-vinylpyridine and r₁ = 0.57, r₂ = 0.62 with 2-vinyl-5-ethylpyridine. These were consistent with the calculated values with the reported Q and e values for these monomers. The intrinsic viscosities of the copolymers with 2-vinylpyridine and with 2-vinyl-5-ethylpyridine were found to be 0.17–0.19 and 0.26–0.38, respectively, in tetrahydrofuran at 30°C; they were independent of the copolymer composition. The copolymers were amorphous, had no clear melting points, and became insoluble crosslinked polymers under heating without further addition of any curing agents.     

Optical oxygen sensor based on fluorescence change of pyrene-1-butyric acid chemisorption film on an anodic oxidation aluminium plate

An optical oxygen-sensing material based on the fluorescence intensity changes of pyrene-1-butyric acid (PBA) chemisorption film has been developed and characterised. The fluorescence intensity of PBA film decreased with increase of oxygen concentration. The I₀/I₁₀₀ value of PBA film is estimated to be 6.14±0.15 and large Stern-Volmer constant (K_SV=0.028±0.13 Torr⁻¹) is obtained. After irradiation for 24 h with 150 W tungsten lamp, little changes of oxygen-sensing properties were observed. These results indicate that PBA film is highly oxygen-sensitive and photostability device. The response times of the PBA chemisorption film were 10.0 s for switching from argon to oxygen, and 53.0 s for switching from oxygen to argon. Moreover, the optical sensor based on the PBA chemisorption film was applied to the measurement of oxygen concentration in aqueous solution.     

R3Al-R'3SiOTf: novel and powerful reagent system for stereospecific alkylation-silylation reactions of epoxides

[reaction: see text] A novel and powerful reagent system R(3)Al-R'(3)SiOTf for the one-pot alkylation-silylation reaction of epoxides was discovered, and the reactions of various epoxides with the new reagent system have been demonstrated to occur stereospecifically giving rise to the corresponding alkylation-silylation products in excellent yields.     

Measurements of the spin rotation parameterR in high energy elastic scattering and helicity amplitudes at Serpukhov energies

The spin rotation parameterR in pp and ⁺ p elastic scattering at 45 GeV/c has been measured at the Serpukhov accelerator, for ¦t¦ ranging from 0·2 to 0·5 (GeV/c)². The results are presented, together with previousR measurements at lower energies, and are compared with the predictions of Regge pole models. The equality of the values forR in proton-proton and pion-proton scattering, within the experimental errors, is a test of factorization of the residues.Ans-channel helicity amplitude analysis for pion-nucleon scattering at 40 GeV/c is made using all available data, Significant results are obtained for the isoscalar exchange amplitudes. The helicity flip in isoscalar exchange is non negligible. The energy dependence of this amplitude, at 6, 16 and 40 GeV/c, is compared with predictions of Reggs pole models.Presented by L.van Rossum at the Symposium on Hadron-Hadron Scattering at High Energies, Liblice, Czechoslovakia, June 16–21, 1975.     

Alkyl-functionalized organic dyes for efficient molecular photovoltaics

We designed and synthesized new alkyl-functionalized organic dyes, MK-1 and MK-2, for dye-sensitized solar cells (DSSCs). Based on the MK-2 dye, a high performance of efficiency (eta, 7.7%; short-circuit current density Jsc = 14.0 mA cm-2, open-circuit voltage Voc = 0.74 V, and fill factor FF = 0.74) was achieved under AM 1.5 G irradiation (100 mW cm-2). Remarkably, the relatively higher Voc for DSSCs based on MK-1 and MK-2 dyes, which have long alkyl chains, were observed among the organic dyes caused by the increasing of the electron lifetime in the conduction band of TiO2. Our molecular design of alkyl-functionalized dyes strongly suggests the promising performance of molecular photovoltaics based on organic dyes.